Plantronics Savi W430-M User manual

Getting started:
The Plantronics Savi headset is ready to use with
your computer and Microsoft® Lync™.
1. Connect your USB adapter to the
computer. If this is the first time you are
connecting, wait for the installation
process to complete. Restart the
computer if directed to do so.
Configuring Microsoft Lync to always route call
audio to the headset:
2. Click on the drop down on the right side
of the main Microsoft Lync window.
3. Select the Audio Device option.
4. Choose your Plantronics headset for
Audio Device.
5. Check the Also Ring box for Secondary
Ringer and choose your PC speakers
from the drop down menu if you would
like them to ring for incoming calls.
6. In this screen you can also test and
adjust volumes.
7. Click Ok when finished.
Note: USB configuration settings are unique for
each USB port. If you connect the headset to a
different port you will need to make these
changes again to set behavior for that USB port.
Savi®W430-M™Quick Setup Guide
Welcome:
Using a Plantronics Savi headset for PC calls
will deliver a simpler, more comfortable and
better sounding audio experience than you
could get using just your computer’s internal
microphone and speaker.
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi and W430-M are trademarks or registered trademarks of Plantronics, Inc. DECT is a trademark of ETSI. Microsoft and Lync are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Published 01.11
5
4
2
3
Savi W430-M Key Features:
Top quality wireless audio for the PC
DECT™ technology provides better audio
and range; eliminates Wi-Fi network
interference
Advanced wideband audio using CAT-iq
technology for high definition voice
quality
Noise-canceling microphone filters out
background noise
Digital Signal Processing technology for
outstanding voice clarity
USB DECT™ Adapter with 180-degree
articulation for optimal positioning and
storage
5

Making and Receiving Calls with Microsoft Lync
To MAKE a call:
To call an existing contact, click on the
drop down next to their name (1) and
select the number you would like to
call (2).
You can also enter a phone number
manually using the search box located
at the top of the main Microsoft Lync
screen (3).
When a call is placed, a call window
will open and the audio will be routed
to your headset.
To RECEIVE a call:
When you receive a call, a notification
window will appear in the lower right
corner of your computer screen (4).
To answer the call, use the controls on
your headset or click on the call
notification window (5).
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi and W430-M are trademarks or registered trademarks of Plantronics, Inc. DECT is a trademark of ETSI. Microsoft and Lync are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Published 01.11
To REDIRECT a call:
You can also redirect a call by clicking
Redirect (6) and choosing one of the
options given.
1
4
5
6
2
3