Playcraft Farm Sound Panel Insert R5 User manual

IMPORTANT NOTES: Read First
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
FARM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
2/7/2019
R5-16042
Page 1 of 4
See Installation Manual
Section R5-1601 Panel Type 1
NOTE: Farm Sound
Panel Insert shown,
other configurations
will vary slightly but
does not affect
assembly.
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Refer to Installation Manual for R5-1601 Panel Type 1 installation instructions.
(C) Sound Box requires (3) C-Cell batteries included. Installation is required.

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
FARM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
2/7/2019
R5-16042
Page 2 of 4
SQUARE NUT
FARM PANEL INSERT
SWITCH
PUSHBUTTON
SPDT 3A 250V
3/8" x 1-1/2"
Button Head
Bolt
3/8" x 7/8" O.D.
Washer
1/2" SAE
Washer
3/8" x 5/8"
Barrel Nut
FIGURE 3
FARM PANEL
INSERT
BATTERY BOX
1/4" x 5/8"
Button Head
Bolt
Step 3
(Factory Assembled)
Attach Farm Sound Panel Cover to Sound Panel
Insert as shown in Figure 3. (See Note A)
FIGURE 1
Step 2
(Factory Assembled)
Attach Farm Sound Pannel Battery Box to Farm Panel
Insert as shown in Figure 2.
NOTE: Use hardware included with Battery Box. Do
not use liquid thread lock (such as Loctite
®
) on
hardware in this step.
For Battery Replacement Only
Remove Battery Box to replace batteries as shown in
Figure 2. Replace batteries and reassemble.
(See Note C)
Step 1
(Factory Assembled)
Insert Square nuts provided into Electronic Farm
Sound Panel Insert as shown in Figure 1.
NOTE: Use hardware included with Battery Box. Do
not use liquid thread lock (such as Loctite
®
) on
hardware in this step.

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
FARM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
2/7/2019
R5-16042
Page 3 of 4
FIGURE 4
3/8" x 1-1/4"
Button Head Bolt
3/8" x 1" O.D.
Washer
ROTO PANEL SQUARE
FARM PANEL INSERT
Step 4
(Factory Assembled)
Attach Farm Sound Panel Insert to Roto Panel as
shown in Figure 4. (See Note A)

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
FARM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
2/7/2019
R5-16042
Page 4 of 4
SOUND PANEL BACKING, COVER & INSERT:
Shall be made from high density 3/4" sheet plastic
specially formulated for optimum UV stability and
color retention.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Assembled Parts List
FARM SOUND PANEL S-16042-R5
Part #
DESCRIPTION QTY.
EE-0461 Electronic Sensor Carriage
7
EF-0139-CVR Electronic Piano Battery Cover
1
EF-0212 Electronic Farm Panel Cover
1
EF-0213 Electronic Farm Panel Insert
1
9101022-TR Bolt Button Head 1/4" x 5/8"
2
9103062-TR Bolt Button Head 3/8" x 1-1/4"
16
9103072-TR Bolt Button Head 3/8" x 1-1/2"
8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick
16
9333042 Washer Flat 3/8" x 7/8" O.D.
8
9345002 Washer Flat SAE 1/2"
8
9443022-TR Nut Barrel 3/8" x 5/8" BH
8
9491202 1/4-20 Round Top Square Nut
2
Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance