Playcraft Drum Sound Panel Insert R5 User manual

IMPORTANT NOTES: Read First
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
DRUM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
3/29/2018
R5-16043
Page 1 of 4
See Installation Manual
Section R5-1601 Panel Type 1
NOTE: Drum Sound
Panel Insert shown
other configurations
will vary slightly but
does not affect
assembly.
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Refer to Installation Manual for R5-1601 Panel Type 1 installation instructions.
(C) Sound Box requires (3) C-Cell batteries included. Installation is required.

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
DRUM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
3/29/2018
R5-16043
Page 2 of 4
SQUARE NUT
ELECTRONIC DRUM
SOUND PANEL R5 INSERT
FIGURE 2
1/4" x 5/8" Button
Head Bolt
Battery Box
ELECTRONIC DRUM
SOUND PANEL R5 INSERT
FIGURE 3
DRUM SOUND
PANEL COVER
3/8" x 5/8"
Barrel Nut
1/2" SAE
Washer
3/8" x 7/8" O.D.
Washer
3/8" x 1-1/2" Button
Head Bolt
Drum Sound Electronic
Component Panel
Electronic Drum
Graphic Panel
ELECTRONIC DRUM
SOUND PANEL R5 INSERT
Step 1
(Factory Assembled)
Insert Square nuts provided into Electronic Drum
Sound Panel Insert as shown in Figure 1.
NOTE: Use hardware included with Sound Box. Do not
use liquid thread lock (such as Loctite
®
) on hardware in
this step.
Step 2
(Factory Assembled)
Attach Drum Sound Panel Battery Box to Sound Panel
Insert as shown in Figure 2. (See Note A)
NOTE: Use hardware included with Sound Box. Do
not use liquid thread lock (such as Loctite
®
) on
hardware in this step.
For Battery Replacement Only
Remove Battery Box to replace batteries as shown in
Figure 2. Replace batteries and reassemble.
(See Note C)
FIGURE 1
Step 3
(Factory Assembled)
Attach Drum Sound Panel Cover with Graphics
Panel and Electronic Component Panel to Sound
Panel Insert as shown in Figure 3. (See Note A)

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
DRUM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
3/29/2018
R5-16043
Page 3 of 4
ROTO PANEL SQUARE
3/8" x 1" O.D.
Washer
3/8" x 1-1/4"
Button Head Bolt
FIGURE 4
ELECTRONIC DRUM
SOUND PANEL R5 INSERT
Step 4
(Factory Assembled)
Attach Drum Sound Panel Insert to Roto Panel
Square as shown in Figure 4. (See Note A)

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
DRUM SOUND PANEL INSERT R5
INSTALLATION INSTRUCTIONS
Rev B
3/29/2018
R5-16043
Page 4 of 4
SOUND PANEL BACKING, COVER & INSERT:
Shall be made from high density 3/4" sheet plastic
specially formulated for optimum UV stability and
color retention.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Assembled Parts List
DRUM SOUND PANEL S-16043-R5
Part #
DESCRIPTION
QTY.
EF-0139-CVR Electronic Piano Battery Cover
1
EF-0208 Electronic Drum Panel Insert
1
EF-0209 Electronic Drum Panel Cover
1
EF-0210 Electronic Sound Panel Backing
1
EE-0464 Electronic Drum Panel Graphic
1
9101022-TR Bolt Button Head 1/4" x 5/8"
2
9103062-TR Bolt Button Head 3/8" x 1-1/4"
16
9103072-TR Bolt Button Head 3/8" x 1-1/2"
9
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick
16
9333042 Washer Flat 3/8" x 7/8" O.D.
9
9345002 Washer Flat SAE 1/2"
9
9443022-TR Nut Barrel 3/8" x 5/8" BH
9
9491202 1/4-20 Round Top Square Nut
2
Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance