Playskool SPEEDSTARS Extreme Loop Track 06706 User manual

AGES 3+
06706
Thank you for choosing this awesome
SPEEDSTARS layset!
Adult Assembly Required.
Extreme Loo ™
Track
Extreme Loo ™
Track
™
Includes 1 car body, 1 chassis,
2 loo ieces, 1 flexible track,
2 base ieces, 1 exit ram ,
1 ower winder, 3 tower
ieces and label sheet.
CAUTION:
Hair entanglement may result if child’s hair
comes in contact with moving parts of toy.
Adult supervision is required.
All manuals and user guides at all-guides.com
all-guides.com

ASSEMBLY
1. Snap 2 base pieces
together (tabs into slots). 2. Snap 2 loop pieces together. 3. Snap loop and base assemblies together.
4. Fit lip on flexible track into top
slot on base piece (garage side).
Press down arrow on track and
f lly insert lip into base piece.
6. Assemble 3 tower pieces: Snap
pins on legs into holes in tower
ramp and snap bottom of legs
together. (Listen for snaps to
ens re proper assembly.)
7. Snap flexible track onto
tower.
5. Snap exit ramp onto base.
TTOOWWEERR RRAAMMPP
GGAARRAAGGEE
LLEEGGSS
All manuals and user guides at all-guides.com

8. Peel and apply labels as shown.
•Snap the car body onto
the chassis… •Place the car onto the power winder, hold the
car in place and crank the
handle ntil the car is f lly
wo nd (approximately
10-15 times)…
•P sh in latch on front of chassis
to remove car body from
chassis.
•Connect other track pieces
from SPEEDSTARS sets (not
incl ded) to the exit ramp!
PLAY FEATURES
Enjoy awesome thrills and spills with this stunt loop designed just for pres hoolers!
•Place the car on the
starting pad, press the
b tton and watch it zoom
aro nd the loop!
Note: For best
performance, be s re the
flexible track is straight.
LLAATTCCHH
EEXXIITT
RRAAMMPP
GGAARRAAGGEE
PPRREESSSS HHEERREE
All manuals and user guides at all-guides.com

© 2003 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office.
Patent Pending
06706 P/N 6259820100
PLAYSKOOL.COM
FOR NEW PRODUCTS AND OFFERS
PLAYSKOOL.COM
FOR NEW PRODUCTS AND OFFERS
Questions? Call: 1-800-PLAYSKL
•Press down arrow on flexible
track and insert track into
base piece.
•Flip down tower ramp
(flexible track remains
attached).
•Store the power winder on the
side of the base (posts on base
into holes in power winder).
•Store the car in the "garage"
inside the base.
•Flip p the exit ramp.
STORAGE
All manuals and user guides at all-guides.com