Plejd GWY-01 User manual

GATEWAY
Further information can be found
in the Plejd app or at plejd.com
GWY-01
INSTALLATION MANUAL
EN

Download the Plejd app on the App
Store or Google Play. Open the app and
follow the instrucons to add Gateway
Connect Gateway to your local network
via Ethernet and to a wall socket using
the power adapter. A network cable and
a power adapter are supplied in the box.
Place Gateway within clear range of
your Plejd system, not in a closed metal
cabinet. The product can be mounted
with the accompanying wall bracket.
Screws for the wall bracket are not
included.
to your Plejd system. Setup requires
Bluetooth® and an internet connecon.
Connect the product
Follow the instructions in the app
1
2

Support
In the event of any technical quesons, please contact our customer service:
[email protected] | [phone]
Power adapter (supplied*)
100–230 V ~50/60 Hz 0.2 A
Output voltage: +5V DC 1 A
USB-C
*Supplied with DVE Switching Adapter, model no.
DSA-6PFG-05 FEU. Use only adapter listed.
Power consumption
0.6 W
External operating temperature
0 to +35 °C indoors
Dimensions
70x70x20 mm
LAN connection
Ethernet/RJ45
Radio
2.4 GHz mesh
Bluetooth®
<10 dBm
Radio range
Approx. 10 m indoors
The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
Pairing with HomeKit®
You can add Gateway to HomeKit
in a few easy steps by using the
Apple®Home app directly from
your iPhone®or iPad®. Open the
Apple Home app and follow the
instructions for adding an accessory.
Discovery Mode
To pair with HomeKit, the product needs
to be in Discovery Mode. Gateway is
automatically in Discovery Mode for
10 minutes after startup. To manually
enable Discovery Mode again, press the
button on top of Gateway once.
Important information
Do not use the product if it has visible
signs of damage. Clean the product with
a dry cloth.
This electrical product should not be
disposed of together with other household
waste. Contact your local recycling center
for guidance on electrical and electronic
equipment disposal.

0840.1.0
Compliant to standards
Hereby, Plejd AB declares that the radio
equipment type GWY-01 is in compliance
with Direcve 2014/53/EU.
The full text of the EU declaraon of
conformity is available at the following
internet address: plejd.com/compliance
Plejd AB
Kroksläs Fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden
Communicaon between IPhone®, IPad®, Apple Watch®, HomePod®, or Mac®
and the HomeKit®enabled Gateway is secured by HomeKit technology.
Use of the Works with Apple®badge means that an accessory has been designed
to work specically with the technology idened in the badge and has been
cered by the developer to meet Apple performance standards. Apple is not
responsible for the operaon of this device or its compliance
with safety and regulatory standards.