Plejd GWY-01 User manual

GATEWAY
Further information can be found
in the Plejd app or at plejd.com
GWY-01
INSTALLATION MANUAL
EN

Download the Plejd app on the
App Store or Google Play. Open the
app and follow the instrucons to add
Gateway to your Plejd system.
Gateway connects to your local
network via Ethernet and communicates
wirelessly with your Plejd products.
Place Gateway within clear range
of your Plejd system, not in a closed
metal cabinet.
The product can also be mounted
in place with the accompanying wall
bracket. A network cable and a power
adapter are supplied in the box. Screws
for the wall bracket are not included.
Setup requires an Internet connecon
on your phone or tablet. With the app
you can communicate directly to the
unit via Internet and Bluetooth®.
Connect the product
1
Download the app and follow the instructions
2

Support
In the event of any technical questions, please contact Plejd customer service.
E-mail: [email protected] | Phone: [phone]
Power adapter (supplied*)
100–230 V ~50/60 Hz 0.2 A
Output voltage: +5V DC 1 A
USB-C
*Supplied with DVE Switching Adapter, model no.
DSA-6PFG-05 FEU. Use only adapter listed.
Power consumption
0.6 W
External operating temperature
0 to +35 °C
Dimensions
70x70x20 mm
LAN connection
Ethernet/RJ45
Radio
2.4 GHz mesh
Bluetooth®
Radio range
Up to 10 m indoors.
The Plejd mesh technology extends the range by
allowing the units to communicate with each other.

0150.3.8
Compliant to standards
Hereby, Plejd AB declares that the radio
equipment type GWY-01 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity
is available at the following internet address:
plejd.com
Plejd AB
Krokslätts fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden