PNI 150W User manual

Invertor de tensiune PNI 150W
Manual de utilizare
Va rugam sa cititi cu atentie manualul de utilizare inainte de punerea in functiune a
produsului.
Invertorul de tensiune poate fi utilizat pentru alimentarea electronicelor de dimensiuni mici si
medii, de exemplu laptop, radio, mini TV, etc .
1
Indicator alimentare
Indicator avertizare
Priza 220V
Mufa alimentare
Mufa USB
Buton pornire/oprire
Descriere produs
Probleme si solutii:
Daca vi se pare ca invertorul nu functioneaza corespunzator verificati urmatoarele cauze
posibile:
Ÿinvertorul nu porneste
- verificati daca mufa de alimentare intra corect in bricheta auto
- verificati siguranta din mufa de alimentare; daca este arsa inlocuiti-o cu una de
aceeasi valoare (15A)
- verificati cablul de alimentare, sa nu fie intrerupt
Ÿputerea de iesire este redusa:
- invertorul este supraincarcat: reduceti numarul echipamentelor conectate
- invertorul este supraincalzit: reduceti numarul echipamentelor conectate sau
inchideti invertorul si asteptati sa se raceasca
Max. 15A
Ÿinvertorul s-a inchis dintr-odata
- verificati bateria auto, s-ar putea sa fie descarcata; porniti motorul pentru a
reincarca bateria, apoi utilizati invertorul
Instructiuni de utilizare:
Pentru alimentarea unui echipament electronic prin invertor procedati in felul urmator:
1. Conectati mufa de alimentare a invertorului la bricheta auto
2. Porniti invertorul de la butonul de pornire/oprire
3. Conectati echipamentul electronic la priza de 220V sau mufa USB
4. Porniti echipamentul electronic
Atentionari:
ŸUtilizati intotdeauna invertorul intr-un mediu bine ventilat
ŸFeriti dispozitivul de lumina directa a soarelui, apa, umezeala, ulei, grasimi
sau substante inflamabile
ŸNu lasati dispozitivul la indemana copiilor
ŸNu utilizati dispozitivul pentru alimentarea lampilor fluorescente
Specificatii tehnice:
ŸTensiune intrare : 10~15V DC
ŸConsum: <0.3A in standby / 15A la incarcare maxima
ŸIesire USB: 5V / 2.1A
ŸTensiune iesire: 220~240V
ŸTip semnal iesire: sinusoida modificata
ŸFrecventa semnal iesire: 50 Hz
ŸPutere iesire: 150W continuu / 450W pt. scurt timp
ŸEficienta: 85~90%
ŸAvertizare baterie auto descarcata: 11± 0.5V
ŸInchidere automata la baterie auto descarcata: 10± 0.5V (dupa 6 sec)
ŸProtectie supraincalzire: 60± 5°C
ŸProtectie supraincarcare: Da
ŸProtectie la scurtcircuit: Da
ŸProtectie tensiune de intrare prea mare: Da
ŸProtectie inversare polaritate: Da, cu siguranta fuzibila
ŸSiguranta fuzibila: 1x15A
ŸCablu: 55 cm lungime
ŸDimensiuni: 175 x 71 x 65 mm
ŸGreutate: 450 g
2
Semnale avertizare (LED rosu):
Baterie auto descarcata:
Inchidere automata la baterie descarcata:
Supraincarcare:
Inchidere automata din cauza supraincarcarii: constant
Supraincalzire:
Inchidere automata la supraincalzire:
Tensiune de intrare prea mare:
MP3 player sau altele

PNI 150W Power inverter
User manual
Please read this manual carefully before using the device .
The inverter can be used to power small and medium size electronics, like a laptop, radio,
mini TV, etc .
1
Power indicator
Alarm indicator
220V socket
Power plug
USB out
On/Off button
Device description
Troubleshooting:
If the invertor doesn’t work properly check the following possible causes:
Ÿthe device doesn’t start
- check if the power plug is connected correctly in the lighter plug of the vehicle
- check the fuse in the power plug; if it is blown please change it with a similar one
(15A)
- check the power cable to be continuous
Ÿreduced output power:
- the inverter is overloaded: reduce the number of connected electronics
- the inverter is overheated: reduce the number of connected electronics or turn off
the device and wait for it to cool down
Max. 15A
Ÿinverter auto shutdown
- check the vehicle’s battery, it might be discharged; turn on the ignition to recharge
the battery then use the inverter again
Basic operation:
Follow the steps bellow to power an electronic device through the inverter:
1. Connect the power plug of the inverter in the lighter plug of the vehicle
2. Turn on the inverter
3. Connect the electronic device to the 220V socket or USB port
4. Turn on the electronic device
Attention:
ŸUse the inverter only in well ventilated environments
ŸKeep the device away from direct sunlight, water, moist, oil, grease and
flammable substances
ŸKeep the device away from children
ŸDo not use the device to power fluorescent lamps
Technical specifications:
ŸInput voltage : 10~15V DC
ŸCurrent drain: <0.3A in standby / 15A with full load
ŸUSB output: 5V / 2.1A
ŸOutput voltage: 220~240V
ŸOutput signal type: modified sine wave
ŸOutput frequence: 50 Hz
ŸOutput power: 150W continuous / 450W peak
ŸEfficiency : 85~90%
ŸBattery low pre-alarm: 11± 0.5V
ŸBattery low auto shutdown: 10± 0.5V (after 6 sec)
ŸOverheating protection: 60± 5°C
ŸOverload protection: Yes
ŸShort circuit protection: Yes
ŸHigh input voltage protection: Da
ŸBattery polarity protection: Yes, by fuse
ŸFuse: 1x15A
ŸCable: 55 cm length
ŸSize: 175 x 71 x 65 mm
ŸWeight: 450 g
2
Alarm signals (red LED):
Battery low pre-alarm:
Battery low auto shutdown:
Overload:
Overload auto shutdown: constant
Overheating:
Overheating auto shutdown:
High input voltage:
MP3 player or others