PNY P-NSA2-PCM-RF User manual

eSATA 2 Port CardBus
User Manual
Model P-NSA2-PCM-RF
Ver. 1.0
All brand names and trademarks are properties of their
Respective owners.
Aug/07 MN2036400003
1

Aug/07 MN2036400003
2
Features and Benefits
zCompliant with Serial ATA 1.0 Specification
zPCMCIA CardBus Interface with Power Management
zProvides two independent channels to support up to two SATA
drives
zSupport SATA data transfer rates of 150MBps
Bus Interface
z32-bit PCMCIAType II
Connectors
z2 x external eSATA connectors
Package Contents
z1 x eSATA CardBus Adapter
z1 x Manual
z1 x Driver CD
System Requirements
zAvailable CardBus Type II Slot
zWindows® 2000, XP and Vista

Aug/07 MN2036400003
3
Hardware Installation
1. Power off your notebook computer.
2. Insert the eSATA CardBus Adapter into the Type II PC Card slot
of your notebook computer.
3. Power on your notebook computer.
Driver Installation
For Windows® 2000
1. At Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended) then click Next.
3. Insert the driver CD, check CD-ROM drives, uncheck the other
boxes, click Next, then click Next again.
Note: If the Security Alert warning pops up, click Yes. Our driver has
passed Microsoft compatibility test. This message appears during new
installation.
4. Click Finish.

Aug/07 MN2036400003
4
For Windows® XP/Server 2003
1. At the Found New Hardware Wizard:
XP(w/SP1 or earlier)/Server 2003: continue to step #2
XP(w/SP2 or later)/Server 2003(w/SP1 or later): select No, not
this time, then click Next.
2. Insert the driver CD, select Install the software automatically
(Recommended), and click Next.
3. Click Finish.
For Windows® Vista
1. At Found New Hardware Wizard, select Locate and install
driver software (recommended).
2. Insert the driver CD, click Next.
3. If the system prompts the user informing the drivers are not
signed, select the option Install this driver software anyway.
4. Click Close to complete the installation.

To Verify Windows® Installation
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Double click SCSI and RAID Controller, then double click
Silicon Image SiI 3512 SATALink Controller to display driver
properties. A message this device is working properly is
displayed in the dialog box, the driver has been correctly installed.
1 Year Warranty
Free Technical Support: 1-800-234-4597
Aug/07 MN2036400003
5