POK MIXY Eductor User manual

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021
User manual
"MIXY Eductor"
400 lpm, in aluminium, control valve, metering device
with hose and pick-up tube
inlet and outlet 2’’ BSP male thread

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
2
Identication
DESIGNATION DESCRIPTION
Product type Eductor
Product
“MIXY” eductor, 400 lpm, in aluminium, with control
valve and metering device, with hose and pick-up
tube, inlet and outlet couplings 2’’ BSP male thread
Product reference concerned by the manual
Ref.: 31443
Ref 31443 and 22235 used for all visuals
N° of documentation MOP_PRO_02341_EN
Language English
Creation Date 08/07/2021
Last modication -
Review follow up Rev. A - 08/07/2021:
- Original le

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
3
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
Table of contents
IDENTIFICATION......................................................................................................2
TABLE OF CONTENTS ................................................................................................3
WARNING .................................................................................................................4
1 • Note ..........................................................................................................4
2 • General Warning ..........................................................................................4
3 • Safety ........................................................................................................4
4 • Liability ......................................................................................................5
5 • Operational instructions ................................................................................5
6 • Warranty ....................................................................................................6
7 • Handling / Transport / Storage.......................................................................6
TECHNICAL DATA .....................................................................................................8
• Main view ......................................................................................................8
• Technical characteristics ..................................................................................9
• Overall dimensions ....................................................................................... 10
INSTRUCTIONS FOR USE........................................................................................ 11
INSTALLATION .................................................................................................. 11
USE .................................................................................................................. 12
• Settings ...................................................................................................... 12
MAINTENANCE........................................................................................................ 13
• Causes of malfunctions - solutions .................................................................. 13
• Dismantling inlet/outlet cones ........................................................................ 14
• Dismantling metering device .......................................................................... 15
• Dismantling control valve .............................................................................. 16
• Storage conditions........................................................................................ 17
• Cleaning...................................................................................................... 17
• Spare parts..................................................................................................17
BILL OF MATERIALS ............................................................................................... 18
• Exploded view.............................................................................................. 18
• Parts list...................................................................................................... 19
NOTES..................................................................................................................... 20

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
4
Warning
1 • Note
POK SAS reserves the right to change or modify the specications of its products at any time to incorporate
the latest technological and regulatory developments. The information contained in this document is subject
to change without notice.
2 • General Warning
Before any use or installation of POK equipment, it is mandatory to read the information
contained in this operating manual, to guarantee the safety of persons and material.
The use, maintenance, or any other operation of the equipment, must be carried out
exclusively by personnel informed of safety rules and trained in the use of this
material.
The non-compliance of safety instructions can be dangerous and cause serious bodily
harm and/or property damage.
3 • Safety
This symbol indicates important safety tips. Pay careful attention to prevent serious bodily
harm and/or property damage.
This symbol indicates instructions that must be observed to ensure smooth operation of the
device. Please always make sure to follow all the necessary precautions.
This symbol indicates useful information to know and understand the correct operation of the
device.
3.1 • General instructions
Operators should read the operating instructions written in this manual before using the eductors. They shall
not be used by people suering from vision or hearing problems, illness or under medication.
In order to work safely, please observe the following instructions while using the material:
• Material shall be used according to the instructions written by POK in this manual.
• Systematically control the good condition of the eductors before any use.
• Any use not following the manual instructions could result in damages to people, to material or to
environment.
• Always know the hydraulic characteristics of the eductors.
• Do not unnecessarily expose people to dangerous re conditions.
• Always open the water supply valves carefully, in order avoid any water hammer in the hoses.
• Never go over the indicated maximum ow rate and pressure, it could result in injuries to people and/or
damages to the eductor.
• Replace the instructions stickers if worn or damaged.
• The eductor shall be kept clean and protected against dust.
• Important material damage and physical injuries are to be feared in the following situations:
- Unauthorised removal of a protection part,
- Improper use of the material or in dangerous situations,
- Poor maintenance,

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
5
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
Warning
- Maintenance on the material while under pressure.
Never go over the indicated maximum ow rate and pressure, it could result in injuries
to people and/or damages to the eductor.
The frost damages can be irreversible, drain the eductor at low temperature (near 0°C and
below).
3.3 • Use
An proper usage of POK material implies following the indicated use and maintenance instructions.
Please follow each instruction listed in this user manual.
The equipment should not be used if a component is damaged or missing
Work pressure is 10 bar at the inlet of the eductor. Eciency and safety of the material
is not guaranteed beyond this value. Non-compliance with safety instructions and
use of the material over the recommended pressure can be dangerous and even cause
death.
3.4 • Limits of use
Our eductors are guaranteed for a maximum working pressure of PN 16. Without explicit written authorization
from POK, the warranty will be void if the pressures listed above are exceeded.
3.5 • Spare Parts
Regarding spare parts, only use POK parts and accessories.
3.6 • Safety elements
It is forbidden to render safety features inoperative, to modify them or to use them in an opposite manner
to their purpose.
4 • Liability
POK's liability is excluded for all damages caused by its material and its accessories because of an improper
use or because operated by non-qualied or not enough qualied people. Any claim from third parties is also
excluded.
POK cannot be held liable for consequences resulting from a change, made on the mechanical and electrical
part and also on the software, by the user without written authorization from POK.
4.1 • Obligations
The owner of POK's material shall bring the instructions written in this manual to the attention of all people
likely to handle, use, install or do maintenance on this material.
The user manual has to be stored near the material for further consultation all along the life of the eductor.

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
6
Warning
5 • Operational instructions
5.1 • General remarks regarding safety during operations
Any person under the inuence of drugs, alcohol or under medication that might
undermine his reexes is not authorized to use the eductor.
Please observe all local, national and international instructions regarding property
and persons safety, accident prevention and environmental compliance.
Any non-compliance with these instructions and the one in this manual may lead to
serious injuries.
Complete the manual with the rules in place where the eductor is used (personal protective
equipment, operation sequence, storage of the remote control, etc.).
6 • Warranty
• Without prejudice to the legal guarantee that applies in any case, POK grants a warranty of 2 years from
the shipping date on its material (eductor, accessories) apart from wearing parts and batteries, against
faulty design, construction and machining and against all abnormal wear on condition of having observed
the use and maintenance instructions in this manual.
• Any attempt to troubleshoot, modify any components or parts, as well as any use of parts that are not
original and/or expressly approved by POK, by a non-authorized dealer, and without written permission,
results in the loss of the POK guarantee for all parts.
• POK's warranty excludes all damages resulting from:
- improper use or non-compliance with the instructions,
- an error while operating the material,
- negligence,
- lack of maintenance,
- improper handling,
- improper storage,
- a use in polluted areas (chemical or electrochemical agents, hazardous fumes, etc.).
• Only a specialized sta, qualied and trained by POK is allowed to do maintenance and repair POK products.
• POK cannot be held liable for direct or indirect consequences suered by the client, due to a failure of
its material. POK's liability is strictly limited to its material and will not lead to a compensation to cover
damages and interest.
• Repair or modication of POK material while under warranty does not extend the warranty period.
• Cost of packing, transport and insurance when sending POK material back to our premises while under
warranty is the responsibility of the client.
• POK warranty includes the repair (spare parts and labour) or replacement of parts recognised as faulty
after technical assessment. The place of performance of the warranty is POK's plant in Nogent-sur-Seine
(10).
• In the event of dispute regarding the supply or the payment of material, only the commercial court of
TROYES is competent, even in the event of appeal or multiple defendants.

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
7
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
Warning
7 • Handling / Transport / Storage
7.1 • General
When unpacking the eductor after transport, check that there is no mechanical damage and/or loose parts
in the interior of the package. In case of damage, the carrier must be informed immediately. In this case,
do not put the equipment into use.
7.2 • Delivery Information
POK equipment is delivered in a packaging adapted to the weight and dimensions of the material. Packaging
is securely closed. A delivery note is included with the equipment.
7.3 • Shipment of Material
In case of reshipping the equipment, or transferring the shipment to other sites, the shipping process above
should be followed.
7.4 • Storage of Material
When storing the device, it is recommended to keep it in its original packaging to protect from humidity, dust
and kept at a temperature.between +10° and +70°C.

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
8
Technical dataTechnical data
POK SAS can supply each product with
different couplings. Depending on your
order the couplings can be different
from the ones shown here.
• Main view
MARK DESCRIPTION
1Body
2Arrow to indicate assembly direction
3
Outlet 2” BSP male thread
Note: A coupling is available upon request. See our catalogue for more information on couplings.
4
Inlet 2” BSP male thread
Note: A coupling is available upon request. See our catalogue for more information on couplings.
5Stabilizing feet
6Metering device
7Suction coupling with ball non-return valve
8Control valve
9
Suction coupling, GFR DN20 female
Note: A coupling is available upon request. See our catalogue for more information on couplings.
10 Pick-up hose
11 Suction rod

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
9
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
Technical data
• Technical characteristics
FIELDS VALUES
Body and suction coupling • Aluminium
Entrance and exit cone • Synthetic
Metering device and
control valve • Nylon
Non-return ball • Polypropylene
Screws and lter • Stainless steel
Pick-up hose • PVC reinforced with a metal wire
Suction rod • EPDM
HYDRAULIC CHARACTERISTICS
Maximum working pressure • 16 bar
Maximum working pressure • 25.5 bar
Operating pressure at the
inlet • 10 bar
Operating pressure at the
outlet • 6.5 bar
Flow • 400 lpm
Suction • Venturi, with no return valve
Suction setting • By metering device 0%, 0.1%, 0.25%, 0.5%, 1%, 2%, 3%, 4%, 5% et 6%
Pressure loss • 35%
Type of foam agent
recommended • All types of synthetic foams
MECHANICAL CHARACTERISTICS
Inlet • 2" BSP male thread
Note: A dierent coupling is available upon request. See our catalogue for more information on couplings.
Outlet • 2" BSP male thread
Note: A dierent coupling is available upon request. See our catalogue for more information on couplings.
Suction coupling • GFR DN20
Note: A dierent coupling is available upon request. See our catalogue for more information on couplings.
Weight • 2.6 Kg

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
10
Technical data
Weight: 2.6 Kg
• Overall dimensions
1000 mm
Hose length 1.5 m
195.5 mm
102 mm
72 mm
339 mm
158 mm195.5 mm
Ø 12 mm

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
11
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
Technical data
Installation
Instructions for use
Connect the eductor to the water inlet (mark A) and the outlet (mark B) following the directional arrow
engraved on the eductor.
Eductors are settled for indicated ow rate with maximum tolerance of 10% less
and 35% of pressure loss.
There is a direct relationship between the pressure loss and the suction.
Place the eductor between the pump (mark A) and the foam production equipment (mark B).
The suction rod must be emerged in the emulsier container (mark C).
Please mind the hoses are straight at least within 1 meter at both sides of the eductor when operating.
The eductor must be compatible with the foam producer and take account of the loss of pressure in the
hose.
Pump must be powerful enough to obtain a 150 PSI (10 bar) pressure at the inlet of the eductor.
1 m 1 m
10 bar
150 PSI
6.5 bar
95 PSI
A B
C
WATER SUPPLY
OUTLET

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
12
Use
Instructions for use
• Settings
1 - Make sure that there are no leaks during installation.
2 - Start the pump and increase the pressure gradually to reach 10 bar (150 psi) at the eductor inlet.
3 - Place the rod in the emulsier
4 - The emulsier is sucked automatically and mixed with the water. Rotate the selection ring on the eductor
to set the percentage of emulsier. The foam forms at the outlet of the foam production device after a few
seconds delay.
5 - Once operations ended, immerse the pick-up tube in clean water and rinse throughly the eductor under
pressure.

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
13
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
Use
Instructions for use Maintenance
• Causes of malfunctions - solutions
1 - Impureties or particles in the entrance cone could prevent the eductor from functioning properly. These
particles can been carried by a dirty suction rod or water. Follow the steps detailled "disassembly exit/
entrance cone” (page 14) to clean the suction chamber
2 - A waterhammer may have moved the membrane of the control valve. To remove the membrane and
put back in its place, follow the steps detailled “disassembly the control valve” (page 15). Open and close
smoothly valves avoiding this.
3 - The direction of assembly must always be respected. Be sure the arrow on the body of the eductor show
the ow direction (page 11).
4 - The functioning of the eductor may be aected if the metering device cannot be turns or turns roughly
Follow the steps “disassembly metering device” (page 15) to set or replace the metering device.
5 - The body of the eductor protects the entrance and the exit cone from bump and a lter from particles.
However, particles carried by water may damage these parts over time. Then, replace these by paying
attention to the ow rate of the spare pieces. Follow the steps “dismantling entrance/exit cone” (page 14).
6 - Due to a bump or a crushing, the body of the eductor may been distorted or internal components broken.
Replace the eductor by a new one. If it seems xable, you can request a price quotation.
7 - The eductors are designed to work with foam equipment with a similar ow rate. The European standard
requires a pressure of 6.5 bar at the outlet for a pressure of 5 bar at the foam branchpipe inlet.
If the pressure loss is higher than 1.5 bar (hose too long or branchpipe too high
comparative to the eductor), the device will no longer working and can not suck up
the emulsier.
As a reminder, each elevation meter between the eductor and the branchpipe raise the pressure loss of 0.1
bar. The eductor is designed to suck up to 1.5 meter above the emulsier. Beyond, the device can not suck
up the emulsier, except for specic design.
Depending on the bend radius, a 90° turn generate a signicant pressure loss, any break or fold must be
avoided in the hoses.
8 - According to the mode and frequency of use, leakage may appear at the metering device due to the wear
of gaskets. If this occurs, follow the steps “dismantling metering device” (page 15).
It is important to check, after each use, that no part is missing or damaged. Where necessary, please
replace it as soon as possible.

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
14
Maintenance
• Dismantling inlet/outlet cones
1 - Unscrew the stop (mark 5).
2 - Replace the gasket R18 if necessary (mark 4) with a new one and grease it before reassembling the
components
3 - Remove the lter holder ring (mark 30).
4 - Unscrew the stop (mark 3) Replace the gasket R21 if necessary (mark 2) grease the gasket before
reassembling the components
5 - Clean the suction chamber with a hook or a cleaning brush.
6 - Grease the gaskets and reassemble the components in the reverse order.
MARK QTY DESCRIPTION CODES
1 1 BODY OF EDUCTOR 31447
2 1 O’RING R21 -
3 1 ENTRANCE CONE 39072
4 1 O’RING R18 -
5 1 EXIT CONE 39073
29 1 FLAT GASKET FOR BOTTOM THREAD 2” BSP 25727
30 1 FILTER 2” 31405
Maintenance operation of the device must be done with water supplies cut o and
system drained.

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
15
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
• Dismantling metering device
1 - Unscrew the guidance screw (mark 13).
2 - Unscrew inlet lter (mark 14), remove the gasket (mark 15) and the ball (mark 16).
3 - Dismantling the metering device (mark 7), clean it and its seat.
4 - Replace the gaskets (mark 6) with a similar new ones, grease before replacing.
5 - Reassemble the components in the reverse order and glue screws (loctite 243).
MaintenanceMaintenance
MARK QTY DESCRIPTION CODES
6 2 GASKET Ø50 x Ø3 TCOAT PSN 06195
7 1 METERING DEVICE 40915
8 1 O’RING Ø53 x Ø3 16839
9 1 NON-RETURN VALVE 43356
10 1 BALL Ø22 16393
11 1 DN 25.2 RUSH 12495
12 39 BALL Ø4 -
13 1 FLAT STHC SCREW M8X8 STAINLESS STEEL A2 ISO 4026 -
14 1 GUIDE 31448
15 1 INDEX SPRING 08019
16 1 BALL Ø5 -

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
16
MARK QTY DESCRIPTION CODES
20 1 BODY 15151
21 1 MEMBRANE OF CONTROL VALVE 07220
22 1 CONTROL VALVE BODY 15153
23 1 PROTECTIVE GASKET OF CONTROL VALVE 15182
24 1 SHOULDERED RING 15154
25 1 NUT H M8 -
26 1 FLANGE 15156
27 2 O’RING R27 -
28 2 TBHC SCREW M6X20 STAINLESS STEEL A2 ISO 7380 -
• Dismantling control valve
1 - Remove the screw (mark 28) and drop o the whole valve
2 - Unscrew the retainer ange of the control valve body (mark 26).
3 - With a Allen wrench, unscrew nut (mark 25).
4 - Drop o the shouldered ring (mark 24) and the calibrated washer (mark 23) and the diaphragm (mark
21).
5 - Replace the diaphragm by a new one and replace gaskets (mark 27), grease gaskets.
6 - Reassemble the components in the reverse order and glue screws (loctite 243).
MaintenanceMaintenance

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
17
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
• Storage conditions
Store the equipment in a clean environment, mud, sand or other element could impede operation of the
equipment, and in rare cases damage it.
• Cleaning
Do not use corrosive products. It can damage the coating of parts of the eductor or damage gaskets.
The soapy water and a cloth are most of the time enought to clean the eductor.
• Spare parts
Depending on use and/or storage conditions, some parts may get damaged more or less faster. Contact our
sales department in order to obtain information about return or to get a price list.
Use exploded views and part lists to accurately identify parts.
Maintenance

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
18
Exploded view
Bill of materials
1
4
5
2
3
29
30
17
16
13
15
14
18
19
6
9
12
28
20
31
11 10
8
6
7
26
25
24
23
21
22
27
27
• Exploded view

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
19
MOP_PRO_02341_EN_A 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
Exploded view
Bill of materials
Parts list
Bill of materials
MARK QTY DESCRIPTION CODES
1 1 BODY OF EDUCTOR 31447
2 1 O’RING R21 -
3 1 ENTRANCE CONE 39072
4 1 O’RING R18 -
5 1 EXIT CONE 39073
6 2 O’RING Ø50 X Ø3 TCOAT PSN 06195
7 1 METERING DEVICE 40915
8 1 O’RING Ø39.5 X Ø3 16839
9 1 NON-RETURN VALVE 43356
10 1 BALL Ø22 16393
11 1 WIRE RING DN25.2 12495
12 39 BALL Ø4 -
13 1 FLAT STHC SCREW M8X8 STAINLESS STEEL A2 ISO 4026 -
14 1 GUIDE 31448
15 1 INDEX SPRING 08019
16 1 BALL Ø5 -
17 1 GASKET 43357
18 1 O’RING R11 -
19 1 CABLE GLAND 43358
20 1 BODY 15151
21 1 MEMBRANE OF CONTROL VALVE 07220
22 1 CONTROL VALVE BODY 15153
23 1 PROTECTIVE GASKET OF CONTROL VALVE 15182
24 1 SHOULDERED RING 15154
25 1 NUT H M8 -
26 1 FLANGE 15156
27 2 O’RING R27 -
28 2 TBHC SCREW M6X20 STAINLESS STEEL A2 ISO 7380 -
29 1 FLAT GASKET FOR BOTTOM THREAD 2” BSP 25727
30 1 FILTER 2” 31405
31 2 STICKER 31988
32 1 SUCTION ROD 22235
• Parts list

POK SAS - 18 Cours Antoine Lavoisier - 10400 Nogent-sur-Seine - FRANCE
Phone: [phone] - Email: export@pok-re.com - Web: www.pok-re.com
MOP_PRO_02341_EN_A - 08/07/2021 - Copyright© POK SAS - Illustrations are only informative
MIXY EDUCTOR - Eductor 400 lpm, in aluminium, male inlet and outlet couplings 2" BSP
20
Notes