Polk Audio High Performance In-Wall Center Channel User manual

www.PolkAudio.com /800.377.7655 (USA & Canada) /410.358.3600 (Worldwide) 1
LCiCDimensions
Overall Height 8-15/16" (22.70cm)
Overall Width 15-5/8" (39.7cm)
Cutout Height 7-5/8" (19.5cm)
Cutout Width 13-1/8" (33.34cm)
Overall Depth 4" (10.2cm)
Mounting Depth 3-1/2" (8.9cm)
with 1/2" of drywall
Available Finish: Paintable White
Hardware (included)
• One LCiCSpeaker
• Speaker Mounting Template
• Paint Mask
•One Grille (perforated)
•Logo Badge
•LC
iCManual
•Registration Card
Important Note:
If anything is missing or damaged, or if your LCiC
speaker fails to operate, notify Polk Audio Installer
Support Services immediately at 800-377-7655.
Hours: Mon.-Fri., 9am-5:30pm EST.
Mounting Depth
(Assumes 1/2"
[12.7mm] drywall)
3-1/2" (8.9cm)
Cutout Width
13-1/8" (33.34cm)
Cutout
Height
7-5/8"
(19.37cm)
Overall
Height
8-15/16"
(22.70cm)
Overall Width
15-5/8" (39.7cm)
Cutsheet for LCiC
High Performance In-Wall Center Channel
Polk continues its tradition of creating audiophile sound from speakers you can barely see with the new LCiCcenter channel
loudspeaker. As with all the loudspeakers in the LCiseries, the LCiCis built to the same performance standards that are creating
anew benchmark in affordable high-performance home theater systems.
Overall Depth
4" (10.2cm)

2Polk Audio Custom Install Product: Model Number
WIRE RECOMMENDATIONS
Runs Gauge
Lengths up to 25' 18 or 16
Lengths greater than 25' 16 or 14
but less than 50'
Lengths greater than 50' 14 or 12
but less than 75'
Lengths greater than 75' 12
Important Note: LCi-Series In-wall Loudspeakers are not mag-
netically shielded and should not be placed closer than 1' (30cm)
from a CRT (picture tube) television or video monitor.
PLACEMENT
Install the LCic as close as possible to ear level.
If the speaker needs to be installed higher,aim
the tweeter up or down as required.
ROOM ENVIRONMENT CONTROL
Tweeter Switch
If your listening room is very reflective, with smooth sheetrock
walls, hardwood floors, and non-cushioned furniture, the sound
will be overly “bright” and unnatural. Selecting the “cut” setting
compensates for the effect of reflectivity in a hard room.
Tweeter attenuation flattens room response, without hindering
higher frequency response, for warmer, more realistic sound and
moreaccurate imaging.
If you have questions, please contact your Authorized
Polk Audio Dealer or Customer Service at 1-800-377-7655
Monday through Friday 9am-6pm EST.
SPECIFICATIONS
LCiC
Product Weight: 8.5 lbs. (3.86kg)
PERFORMANCE
POWER HANDLING (WATTS/CHANNEL) 10-150W CONTINUOUS
IMPEDANCE (NOMINAL) 4 OHMS
FREQUENCY RESPONSE (OVERALL) 30HZ–27KHZ
EFFICIENCY (2.83V@1M) 91dB
SPEAKER WEIGHT 8.5 LBS (3.86KG)
DRIVER COMPLEMENT
MIDBASS 2-5 1/4" (13.34CM)
AERATED POLYPROPYLENE
DYNAMIC BALANCE™DRIVERS
TWEETER 1-1" (2.54CM)
AIMABLE RING RADIATOR TWEETER
CONNECTIONS
SPEAKER WIRE
MAXIMUM WIRE SIZE ACCOMMODATED 12 AWG
MINIMUM RECOMMENDED 18 AWG
INPUT CONNECTORS HEAVY-DUTY SPRING LOADED
PUSH TERMINALS
Web Address:
For more information on the LCiC,log onto
www.polkaudio.com/downloads/manuals/
home/LCic_manual.pdf