
BLUETOOTIP WIRELESS TECHNOLOGY
To use your 8/uetooth wireless technology device
with
the SurroundBar
6500BT,
you
must
first pair your
device with your SurroundBar.
Pairing creates the ability
of
your 8/uetooth device
to
connect
with
your SurroundBar
wi
relessly.
Pa
iring is like a handsha
ke
between your 8/uetooth device and your Surround
Bar
6500BT
in
which they
meet
and exchange information.
You only have
to
pair your SurroundBar with your 8/uetooth
device one time for this exchange
of
information
to
take place.
After that you simply select the "polk soundbar" from your
device list
to
make the connection to your SurroundBar.
The SurroundBar
can
hold 8 8/uetooth dev
ic
es
in
its memory.
If enough devices pair after yours, your device could
be dropped from the memory
li
st.
Pair and connect your Bluetooth device
with
the SurroundBar:
1.
Make sure your 8/uetooth device and
Su
rroundBar
6500BT
are
both powered on.
2.
Activate the 8/uetooth function
on
your 8/uetooth source
device. See your device's manual for instructions.
3.
Press the
8/
uetooth source button from the SurroundBar
remote or press the
SOURCE
button on the SurroundBar
until the 8/uetooth source is selected.
The 8/uetooth symbol
wi
ll
illuminate, th
en
begin slowly
pulsing
as
it looks for the paired device.
4.
Your SurroundBar w
ill
now
be displayed
on
your source
device and
avai
lable
to
pair and/or connect.
Se
lect the
"po
lk soundbar"
on
your device
to
initiate
the connection process.
5.
After a short delay (5 seconds
),
the t
wo
devices should
now
be connected.
You
should hear a short tone
and
the 8/uetooth source symbol
wi
ll
now
be
steady blue.
6.
Play
your music from your device!
Note:
If your device asks for a passcode
to
pair to the
SurroundBar, e
nt
er "0000."
How
to
disconnect
with
a
8/uetooth
device:
1.
Press and release the Remote Control 8/uetooth button, or
2.
Press and release the 8/uetooth Source button, or
3. Turn off or disconnect the 8/uetooth feature
on your 8/uetooth device.
The SurroundBar will emit a short tone
and
the
8/uetooth source symbol w
ill
begin slowly pulsing
when disconnected.
Automatic connection:
Any time you
want
to
connect the last paired device
and play it through the SurroundBar, do the follo
wi
ng
:
1.
Turn your device's 8/uetooth function on.
2.
Enter 8/uetooth source by pressing the 8/uetooth source
button from the remote or press the
SOURCE
button
on the SurroundBar until the 8/uetooth source is selected.
3. After a short delay, the
two
devices will automatically
connect. You will hear a short tone, and the 8/uetooth
sou
rc
e symbol w
ill
now
be
steady b
lu
e.
Note:
By default, the last connected 8/uetoo
th
device
will automatically connect if
avai
lable.
Pair
and/or
connect
to
a device
when
in
8/uetooth
source, but disconnected:
1.
Engage the 8/uetooth funct
io
n
on
your 8/uetooth source
device.
See
your device's manual for instructions.
a.
The SurroundBar
wi
ll
be displayed
on
your source
device
as
available
to
pair and connect. Select
the "polk soundbar"
on
your device
to
initiate
the
pa
iring and connection process.
After a short delay, the
two
devices shou
ld
now
be
pa
ired
and connected. You should hear a short tone and the
8/uetooth source symbol will
now
be steady blue.
How
to
disconnect:
Note:
Anytime The SurroundBar exits
SLEEP
mode and is
in
8/uetooth source, the SurroundBar will automatically connect
to
the last
pa
ired 8/uetooth device if the paired device's
8/uetooth
fea
ture is on.
Customer
Service
H
ours
of
Operation
:
Monday
-
Fr
iday
,
9AM-5:30PM EST
polkcs
@
po
l
kaud
io
.
com
7