Polk Mono SR2 User manual

Quick Start Guide
SR2 Wireless Surrounds

2
Thank you for your Polk purchase. If you have a question or comment, feel free to call or email us.
Technical Assistance
In North America, call Polk Customer Service at 800-377-POLK(7655) (M–F 9:00 a.m.–5:30 p.m. EST)
Outside the US, call [phone]
Email: [e-mail]
Polk Audio, LLC
5541 Fermi Court
Carlsbad, CA 92008
U.S.A.
The Polk SR2 surround speakers are compatible with several Polk sound bars.
Please visit the Polk website for a list of all compatible sound bar models.
Polk Audio is a DEI Holdings, Inc. Company. Polk Audio and Polk, are registered trademarks of Polk Audio, LLC.
All other trademarks, product names, logos, and brands referenced herein are the property of their respective owners.

3
What’s in the Box
Left surround Speaker
(2) Power supplies Product Literature
Right surround Speaker
Wall-mount template
Graphics FPO

4
Position your surround speakers
1. Place the surround speakers on the left and
right sides and equidistant from the main
listening position.
2. Make sure you place the speaker marked
“LEFT” on the left and the speaker marked
“RIGHT” on the right.
3. Plug the power supply into the speaker and
then into a power outlet.
Note: If you want to mount the surrounds on your wall, please refer to the wall mounting template for
instructions.
RIGHT
LEFT
Graphics FPO

5
Connect to a Polk React or Polk Magnifi 2 sound bar
Enter pairing mode on the sound bar.
1. Press and hold the CONNECT button on the back of the sound bar until the lights above the
CONNECT button are blinking green (about 3 seconds).
Connect the surround speakers
2. Press and hold the CONNECT button on the back of the speaker. The light on the bottom changes
from solid amber to blinking green (about 3 seconds).
3. Release the button when you hear a tone from the sound bar.
4. Repeat steps 2 and 3 for the other surround speaker.
Subwoofer Surround
CONNECT
CONNECT
15V, 1.2A
POWER
Graphics FPO

6
Connect to a Polk React Fire TV Edition sound bar
Enter pairing mode on the sound bar
1. Go to the Settings/Sound menu using the on-screen Fire TV menus.
2. Select “Sub & Surrounds”.
3. Select “Connect” to enter pairing mode on the sound bar.
Connect the surround speakers
4. Press and hold the CONNECT button on the back of the speaker. The light on the bottom changes
from solid amber to blinking green (about 3 seconds) as it searches for a sound bar to connect to.
5. Release the button when you hear a tone from the sound bar. The light on the bottom will change
to solid green when connected.
Repeat steps 4 and 5 for the other surround speaker.
Graphics FPO
CONNECT
15V, 1.2A
POWER

7
Troubleshooting
I don’t hear sound from my surround speakers.
If the light on the bottom of the surround speaker is:
• O, verify that the power supply is connected to the speaker and to a working power outlet.
• Amber, make sure your sound bar is turned on, and connect the speaker to the sound bar using
the instructions on the previous page.
• Green, turn up the surround volume using the remote control.
My sound bar does not have a CONNECT button on the back.
Follow the on-screen instructions under the Settings/Sound menu to connect your SR2 surround
speakers to your sound bar.
For more troubleshooting and information, please visit polkaudio.comj/support.

5541 Fermi Court
Carlsbad, CA 92008
U.S.A.
800-377-7655
www.polkaudio.com
EU Importer:
D&M EuropeB.V.
Beemdstraat 11, 5653 MA
Eindhoven, The Netherlands HBP4476
72-FTVSR2-QSGB1