Polygroup TG76M2S85L04 User manual

MODEL #: TG76M2S85L04 2020 TREE LETTER "C"
Sku # 5361316
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.25A
Output: 29V DC 0.45A
Fig. B – Tree and Light Assembly
Tree Top
Section 2
Section 1
Insert Adapter
Into Wall
Outlet
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®!
This tree comes with Quick Set® and Fast ShapeTM technology which takes less than 10 minutes to set up and light up! Carefully
follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Remove protective cap, and insert the pole of Section 1 into the assembled stand.
Insert the pole of Section 2 into Section 1. Insert the pole of the tree top into Section 2. Ensure that all poles are firmly secure. Be
sure that all wires are free of branch hinges.
5. Insert the adapter into the wall outlet (See Fig. B).Your entire tree should now be lit.
6.This tree is constructed with Quick Set® and Fast ShapeTM technology. Shaping is not necessary; you just need to slightly upsweep
all tips and shift branches to fill in any gaps for a fuller, uniform look.Your Christmas tree is now ready to be decorated.
Insert Green
Label Extension
Cord into Adapter
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
Fig. A - Tree Stand Assembly
Click
Pull apart tree stand legs until they
snap and form an ‘X’ shape.
To close the stand, press the metal
button and fold the legs together.
Align both arrows
in a straight line
before sliding
down to insert
Open the
cap cover
Do Not Tamper
Internal Parts
1

TROUBLESHOOTING TIPS
If The Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that the adapter is properly and firmly connected to the wall outlet.
2.Turn the poles gently to make sure pole to pole are firmly connected.
3. Disconnect from power source, then check for loose, broken or missing light bulbs and replace as needed.
STORAGE INSTRUCTIONS
1. Disconnect adapter from the wall outlet.Then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Gently lift the pole straight up to remove from the section below, and fold
all branches toward the pole.
3. Close the protective cap on the poles to avoid damaging the internal parts (Fig. C).
4. Carefully place all tree sections into the shipping box and tape it shut.
5. Store your tree in a cool, dry place away from sunlight. Exposure
to excessive heat or humidity may damage your tree.
SPARE PARTS
This tree includes hinge pins and washers, and spare bulbs.
If extra parts are needed, please contact our customer service center.
Fig. D
Distributed by: Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com
Fig. C
Loose Hinge Pin
1. Extra hinge pins are included for repairing the hinges.
Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure
using the retainer washer. (See Fig. D)
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase.Please contact us at 1-888-919-0070
or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address:(No P.O. Boxes)
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
2
CAUTION:
To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may
cause fire, or electrical shock hazards
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and
c) Do not mount or support strings in a manner that can cut or damage wire insulation.