Polygroup TP30M2W72C00 User manual

Part
1
2
Description
Tree Body
Pot
Quantity
1
1
3
Tree Top
1
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate
location near a wall outlet.
2. Insert tree body 2into the top hole of the pot. And then
insert the tree body 3into tree body 2. See Fig.A.
TREE ASSEMBLY INSTRUCTIONS
*Electrical Rating For The Tree
(For Indoor and Outdoor Use)
120 V ~60Hz, 0.34A
2
3
1
PACKAGE CONTENTS
Fig. B
Fig. A
Insert
Green Label
Plug Into Wall
Outlet
3. Connect the plug into the wall outlet. Your entire tree
should now be lit. If some bulbs do not light or flickers,
search for any bulbs loose, missing or broken bulbs.
Replace bulbs promptly in order to maintain the
performance of your pre-lit tree.
STORAGE INSTRUCTIONS:
1. Remove all ornaments and decorations.
2. Unplug the cord from the wall and then unplug each section
of the tree.
3. Gently lift the tree top straight up to remove from the body
section and fold all branches towards the pole.
4. Repeat this step for the body section.
5. Carefully place all tree sections into a shipping box and tape
it shut.
6. Do not store tree in a damp area or in an area where the
temperature exceeds 100° F.
7. Keep out of reach of pets and children.
MODEL #: TP30M2W72C00
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
1
Assemble
Red Labels
Together

2
TROUBLESHOOTING TIPS
For pre-lit trees spare bulbs and fuses are also included.
If extra parts are needed, please contact our customer service center.
SPARE PARTS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected according to the color labels indicated in Fig.B and the power
cord is plugged into the wall outlet. Refer to assembly guide for instructions.
2. Please check for blown fuses at the light string plugs and power cord plug. Replace as needed.
Note: Please make sure to use appropriate replacement fuses as indicated on the light string plug and power cord plug.
3. Please check for loose, broken or missing light bulbs and replace as needed.
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070
or visit our website at www.polygroupstore.com.One of our customer service representatives will be happy to assist you.
CUSTOMER SERVICE FOR CHRISTMAS TREES
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.