Polygroup TV90M3ANMC00 User manual

MADE IN CHINA
ASSEMBLY INSTRUCTIONS MADE IN CHINA
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to set up your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
*Electrical Rating For The Tree
(For Indoor Use Only)
1.36A 120V, 60Hz
Fig. B - Tree and Light Assembly
Tree Top
Section 1
Section 2
MODEL #: TV90M3ANMC00 2018 TREE LETTER "L"
Sku # 5108972
Fig. A - Tree Stand Assembly
Click
Pull apart tree stand legs until they
snap and form an ‘X’ shape.
To close the stand, press the metal
button and fold the legs together.
Insert Green
Label Plug Into
Wall Outlet
Connect
Red Label
Plugs
Connect
Yellow Label
Plugs
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Insert the pole to the assembled stand until firmly
secured.
5. Connect plugs of the same label color together, and then insert green label plug into the wall
outlet (Fig. B).Your entire tree should now be lit.
6. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out
in a star shape (Fig. C), and continue until the entire tree is shaped.
Top view Side view
Fig. C

ASSEMBLY INSTRUCTIONS MADE IN CHINA
Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com
7. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps.Your Christmas
tree is now ready to be decorated.
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance or missing parts, Do Not Return To Place Of Purchase.
Please contact us at 1-888-919-0070 or visit our website at www.polygroup.com. One of our
customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address (NO P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
STORAGE INSTRUCTIONS
1. Unplug from the wall outlet first, and disconnect other plugs.Then remove all ornaments and
decorations.
2. Disassemble the tree from the top to the bottom. Gently lift the pole straight up to remove from the
section below, and fold all branches toward the pole.
NOTE: In case of difficulty separating the poles, apply a small amount of lubricant at the joint, rotate
the upper pole in both directions, and lift the upper pole again.
3. Carefully place all tree sections into the shipping box and tape it shut.
4. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may
damage your tree.
TROUBLESHOOTING TIPS
If The Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that all plugs and poles are properly and firmly connected as indicated in Fig. B
and assembly instructions.
2. Disconnect from power source, then check for loose, broken or missing light bulbs and replace as
needed.
3. Disconnect from power source, then check for blown fuses and replace as needed.
NOTE: Please make sure to use appropriate spare fuses as indicated on the label plugs.
SPARE PARTS
This tree includes spare bulbs and fuses. If extra parts are needed, please contact our customer
service center.