Polygroup Funsicle Oasis Pool User manual

Locate a clean and flat level area free of stones
or sharp objects.
TIP: Let the liner sit under the sun for at least
two hours before assembling the rest of the
pool; this allows the liner material to be more
flexible, making it easier for you to attach it to
the beam frame structure.
STEP TWO: Assemble the pool frame and connect it to the liner.
STEP ONE: Prepare the site.
This Quick Start Guide provides a simple overview to your pool’s setup process.
For detailed setup guidelines, important safety information and useful tips, refer to the
enclosed “Funsicle Oasis Pool User Guide.”
Ready. Set. Play.
1. Lay all parts (located in Boxes 2a & 2b) on the ground around the pool liner as shown below:
2. Take one horizontal beam and insert it to one T-Fitting to form a set.
3. Carefully slide the horizontal beam set into the sleeves of the pool liner.
4. Connect the other sets of the horizontal beam with the T-Fitting (each should snap into place).
NOTE: The Easy Link T-Fitting (located in Box 2b, in a plastic bag with “Easy Link T-Fitting” marking)
should be the FINAL T-Fitting to complete the top frame.
Oasis Pool
Quick Start Guide Sign up for future
offers and discounts.
Scan the QR Code.
2a
2b

5. Connect the last horizontal beam with the Easy Link T-Fitting to complete the top frame.
6. Carefully slide the Vertical Legs up through
the liner’s belt that runs around the middle of
the pool, and then lock each one into the
hole of the T-Fitting.
7. Continue working around the perimeter until
the entire liner is securely connected to
the frame.
8. To make sure the poles are perpendicular to
the ground (and not leaning), pull the vertical
legs towards you. This will make the
walls straighter.
Funsicle Customer Service
Website: funsicle.com/support
Phone: [phone]FUN (888-670-4386)
Email: [email protected]
STEP THREE: Add 1 inch of water to the pool and then install filtration system.
1. After ensuring that the drain fitting is plugged securely and the cap is in place, fill the pool
with about an inch of water. Then stop filling, and smooth out all wrinkles in the liner.
3. Continue adding water to your pool and refer to the “Funsicle Oasis Pool User Guide”
for information and best practices for using, maintaining, draining, storing and/or
winterizing your pool.
2. Install the filtration system as per the enclosed “Funsicle Skimmerplus Filter Pump User Guide.”