Polywood CLC23 User manual

4MM T-HANDLE HEX KEY
(INCLUDED)
TOOLS NEEDED
Step 2
Description
Qty.
Model: CLO23
Repeat step 1 on other side frame
Set cushion in ottoman
- Attach mid brace to sideframe
using (1) 3” chair screw
__(2) Bottom braces
__(1) Hardware pack
__(1) Ottoman cushion
__(2) Top braces
__(1) Mid brace
__(2) Sideframe assembly
Step 1
- Attach bottom braces and top braces to sideframe
using (4) 3” chair screws
Step 3
10
9/28/2012
ASSEMBLY INSTRUCTIONS
.27 x 3" SOCKET WAFER "A"
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
Mid brace
Bottom braces
Top braces
Side frame assembly

Lay table top face down.
DescriptionQty.
Model: CLT1818
using (4) 3” chair screws
Attach sideframes to table top
using (4) 3” chair screws
-(1) Hardware pack
-(1) Table top
-(2) Braces
-(2) Sideframes
8
Step 1
Step 2
Attach braces to sideframes
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED11/29/2012
ASSEMBLY INSTRUCTIONS
Braces
Table top
Sideframe
A - .27 X 3 SOCKET WAFER A
(INCLUDED)
4mm HEX KEY, ALLEN, T-HANDLE
PHILLIPS HEAD SCREW DRIVER
TOOLS NEEDED

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at [phone] or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at [phone] or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog