Polywood SBO22 User manual

B-1/4 FLAT WASHER
6
A
B
C
6C-1/4-20 NYLOCK NUT
- 7/16 wrench
- 4mm hex key, allen, t-handle
(incluided)
A-1/4-20 X 1-7/8 WAFER SHCS
6
9/25/2012
ASSEMBLY INSTRUCTIONS
__(1) Long leg assembly
Qty. Description
Model: SBO22
__(1) Hardware pack
TOOLS NEEDED
__(1) Short leg assembly with (6) 1-7/8” bolts, nuts and washers
Step 1
Attach long leg assembly to short leg assembly
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED

9/25/2012
ASSEMBLY INSTRUCTIONS
using (2) .27x2" screws
Qty. Description
Model: SBA15
8
TOOLS NEEDED
- 4mm T Handle Hex Key (included)
- 7/16 Wrench
6
Attach front legs to seat
using (6) 1-7/8" bolts, nuts
Step 2
Attach arms to front leg using
2
__(1) Hardware pack
__(1) Short brace
__(1) Long brace
__(2) Arms
__(2) Front legs
__(1) Back using (2) .27x2" screws
Attach long brace
and washer (2) 2-1/4" bolts, nuts and washer
__(1) Seat
Step 1
Step 3
Attach back to seat
using (2) .27x2" screws
Attach back to arm
8
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
A
B
B
Long brace
A
Wing faces
front D,E
8E-1/4-20 NYLOCK NUT
D-1/4 FLAT WASHER
C-1/4-20 X 2-1/4 WAFER SHCS
B-1/4-20 X 1-7/8 WAFER SHCS
A-.27 X 2 SOCKET WAFER A
Step 4
using (2) .27x2" screws
Attach short brace to rear leg
A
Short brace
A
A
A
A
A
C
D,E