Portfolio FY09-002 User manual

Portfolio is a registered trademark of
LF, LLC. All rights reserved.
®
ITEM #0048183
0048184
WALL LANTERN
MODEL #FY09-002
FY09-003
Français p. 8
Español p. 15
ATTACH YOUR RECEIPT HERE
Lowes.com/portfolio
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -
5 p.m., EST, Friday.
1
Serial Number
EB14726
Purchase Date

Lowes.com/portfolio Lowes.com/portfolio
2
PART DESCRIPTION QUANTITY
A Finial 1
B Fixture 1
C Glass (preassembled to Fixture (B)) 4
PACKAGE CONTENTS
3
DD EE
CC
BB
Wire nut
Qty. 3
Rubber ring
(preassembled
to Crossbar
(EE))
Qty. 2
Cap nut
(preassembled
to Crossbar
(EE))
Qty. 2
HARDWARE CONTENTS (shown actual size)
B
AA
A
B
C
Machine
screw
Qty. 2 Crossbar
(Not actual size)
Qty. 1
SAFETY INFORMATION
WARNING
CAUTION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning
installation by removing fuse (or switching off circuit breaker).
• MINIMUM 75°C SUPPLY CONDUCTORS.
• CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
• If in doubt about electrical installation, consult a licensed electrician.
• Install lamp more than 48 in. from ground.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 35 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Electrical
tape.
Helpful Tools (not included): Wire strippers, Pliers, Wire cutters, Safety glasses, Step ladder.

45
ASSEMBLY INSTRUCTIONS
1
1. Remove cap nuts (BB) and rubber ring (AA) from
the preassembled mounting screws on crossbar
(EE). Attach crossbar (EE) to the outlet box (not
included) with machine screws (DD). Note: The
preassembled mounting screws should protrude
away from the outlet box.
2
Hardware Used
x 3
Wire nut
3
CC
ASSEMBLY INSTRUCTIONS
4
4. Screw nial (A) onto the xture (B).
5. Place xture (B) onto crossbar (EE). Replace
rubber rings (AA) on crossbar (EE) and secure
with cap nuts (BB).
5
6
6. Install light bulb (not included). Use one 100-watt
max. standard-base bulb or one 23-watt standard-
base CFL bulb.
• Note: Before use, add silicone glass sealant between wall and canopy, leaving the bottom clear
so moisture can drip down.
Lowes.com/portfolio Lowes.com/portfolio
EE
AA
BB
DD
Hardware Used
Hardware Used
Rubber ring
Rubber ring
Cap nut
Cap nut
Machine screw
Crossbar
Crossbar
x 2
x 2
x 2
x 2
x 2
x 1
x 1
B
B
B
B
AA
AA
BB
BB
B
DD
B
B
B
EE
EE
CC
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
3. Attach wire nuts (CC). Tape wire nuts (CC)
and wires together.
A
B
BB
EE
AA
B
or

7
Printed in China
Portfolio is a registered
trademark of LF, LLC.
All rights reserved.
®
6
CARE AND MAINTENANCE
• Shut off main power supply before wiping product with damp cloth or window cleaner. Do not
use abrasives.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Bulb won’t light. 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace switch.
Fuse blows or circuit
breaker trips when
light is turned on.
Crossed wires or power wire is
grounding out.
Check wire connections.
WARRANTY
The manufacturer warrants all of its lighting xtures against defects in materials and workmanship
for three (3) years from the date of purchase. If within this period the product is found to be
defective in material or workmanship, the product must be returned, with a copy of the original
sales receipt as proof of purchase in the original carton, to the place of purchase. The manufacturer
will, at its option, repair, replace or refund the original purchase price to the consumer. This
warranty does not cover xtures becoming defective due to misuse, accidental damage, improper
handling and/or installation and specically excludes liability for direct, incidental or consequential
damages. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply to you. This warranty gives you specic legal rights, and
you may have other rights that vary from state to state.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m.,
EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PART DESCRIPTION PART #
AA Rubber ring 410-100400
BB Cap nut 110-080800
CC Wire nut 375-022000
DD Machine screw 109-042600
EE Crossbar 152-103000
Lowes.com/portfolio Lowes.com/portfolio
DD EE
CC
BB
B
AA