Portwell WADE-8016 User manual

WADE-8016
Mini-ITX Board
User's Manual
Version 1.1
Copyright © Portwell, Inc., 2014. All rights reserved.
All other brand names are registered trademarks of their respective owners.

Preface
Table of Contents
How to Use This Manual
Chapter 1 System Overview.......................................................................................................1-1
1.1 Introduction ....................................................................................................... 1-1
1.2 Check List........................................................................................................... 1-2
1.3 Product Specification........................................................................................ 1-2
1.3.1 Mechanical Drawing................................................................................ 1-5
1.4 System Architecture.......................................................................................... 1-6
Chapter 2 Hardware Configuration ...........................................................................................2-1
2.1 Jumper Setting................................................................................................... 2-1
Chapter 3 System Installation....................................................................................................3-1
3.1 Intel Haswell Processor .................................................................................... 3-1
3.2 Main Memory.................................................................................................... 3-5
3.3 Installing the Mini-ITX Board Computer ...................................................... 3-6
3.3.1 Chipset Component Driver .................................................................... 3-6
3.3.2 Intel Integrated Graphics Controller..................................................... 3-6
3.3.3 On-board Gigabit Ethernet Controller.................................................. 3-6
3.3.4 Realtek ALC892 HD Audio Controller................................................. 3-6
3.4 Clear CMOS Operation .................................................................................... 3-7
3.5 WDT Function ................................................................................................... 3-8
3.6 GPIO.................................................................................................................... 3-9
Chapter 4 BIOS Setup Information............................................................................................4-1
4.1 Entering Setup ................................................................................................... 4-1
4.2 Main .................................................................................................................... 4-2
4.3 Configutation..................................................................................................... 4-3
4.4 Boot ................................................................................................................... 4-18
4.5 Security ............................................................................................................. 4-20
4.6 Save & Exit ....................................................................................................... 4-21
Chapter 5 Troubleshooting........................................................................................................5-1
5.1 Hardware Quick Installation..................................................................... 5-1
5.2 FAQ ............................................................................................................... 5-2

Preface
How to Use This Manual
The manual describes how to configure your WADE-8016 system board to meet
various operating requirements. It is divided into five chapters, with each chapter
addressing a basic concept and operation of Mini-ITX Board.
Chapter 1: System Overview. Presents what you have in the box and give you an
overview of the product specifications and basic system architecture for this series
model of Mini-ITX Board.
Chapter 2: Hardware Configuration. Show the definitions and locations of Jumpers
and Connectors that you can easily configure your system.
Chapter 3: System Installation. Describes how to properly mount the CPU, main
memory and Compact Flash to get a safe installation and provides a programming
guide of Watch Dog Timer function.
Chapter 4: BIOS Setup Information. Specifies the meaning of each setup
parameters, how to get advanced BIOS performance and update new BIOS. In
addition, POST checkpoint list will give users some guidelines of trouble-shooting.
Chapter 5: Troubleshooting. Provide various of useful tips to quickly get
WADE-8016 running with success. As basic hardware installation has been
addressed in Chapter 3, this chapter will basically focus on system integration issues,
in terms of backplane setup, BIOS setting, and OS diagnostics.
The content of this manual is subject to change without prior notice. These changes
will be incorporated in new editions of the document. The vendor may make
supplement or change in the products described in this document at any time.

System Overview
WADE-8016 User’s Manual 1-1
Chapter 1
System Overview
1.1 Introduction
Portwell Inc., a world-leading innovator in the Industrial PC (IPC) market and a
member of the Intel®Embedded and Communications Alliance (Intel ECA),
announced today the Portwell WADE-8016 adopting the Mini-ITX form factor. The
WADE-8016 of the Intel platform will provide high performance and flexibility for
functional expansion, such as Gaming, Kiosk, DS, Medical, Defense, Industrial
automation and control applications.
Haswell is the next major architecture from Intel. The WADE-8016 supports the
latest Intel®Haswell processors in LGA1150 package which has memory and PCI
Express controller integrated to support 2-channel DDR3 memory and PCI Express
2.0 lanes providing great graphics performance. Intel®Haswell processor is one of the
most powerful and energy efficient CPU in the world. Portwell have taken advantage
of such technology to furnish a series of products that can meet multiple industrial
requirements such as cost-effective of CPU performance or industrial systems.
WADE-8016 is based on the Intel®Haswell processor and Intel®H81 chipset. The
Intel H81 Express Chipset, when combined with a processor from the Intel®Dual
Core/Quad Core processor family, delivers smart security, cost saving
manageability, and intelligent performance for business platforms. WADE-8016 is the
first Portwell off-the-shelf product by Intel®H81 Express Chipset, it can be an
embedded solution and a good platform for customer to integrate it to the embedded
system.
WADE-8016 showcased one of Portwell upcoming motherboard for the Intel®
Haswell processors. The WADE-8016 is based on the forthcoming Intel H81 chipset
and supports the new LGA 1150 socket (socket that will be used by Haswell
processors). This board has lots of features, including supports total 2x SATA 3
(SATA 6.0 Gbps) storage specification and supports the latest PCIe 2.0 (one
PCI-Express x16 slot) devices for double speed and bandwidth which enhances
system performance, one CF slot on board supports Portwell exclusive CFEX(SATA
interface), two long-DIMM memory slot for DDR3 SDRAM up to 16GB, support total
10 USB ports (4x rear IO by USB2.0 / 4x on board by USB2.0 / 4x on board by
USB3.0), VGA / HDMI / DVI and two Gigabit Ethernet.

System Overview
WADE-8016 User’s Manual 1-2
1.2 Check List
The WADE-8016 package should cover the following basic items
One WADE-8016 Mini-ITX Main Board
One SATA Cable
One I/O Shield bracket
One Installation Resources CD-Title
If any of these items is damaged or missing, please contact your vendor and keep all
packing materials for future replacement and maintenance.
1.3 Product Specification
Main Processor
-Intel® Dual Core/Quad Core LGA1150 processor
-CPU clock bus: 1333/1600 MHz
Chipset
-Intel® H81 chipset
System BIOS
-AMI BIOS
Main Memory
-Two 240 -pin DDR3 Long-DIMM socket support up to 16GB dual channel
1333/1600 MHz memory
Expansion Interface
-One PCIex16
-One CFEX (SATA interface)
SATA Interface
-Two SATA 6Gb ports
-Two SATA 3Gb ports
Serial Port
-Support total four com ports(one RS232 and one RS232/422/485 on rear
I/O, two RS232 on board header)
USB Interface
-Support Ten USB (Universal Serial Bus) ports, four on rear I/O(USB2.0) and six
on board header(4x USB 2.0 ,2x USB 3.0) for internal devices
Audio Interface
-Connector for Mic-In, Line-In and Line-Out
Real Time Clock/Calendar (RTC)
-Support Y2K Real Time Clock/Calendar

System Overview
WADE-8016 User’s Manual 1-3
Watch Dog Timer
-Support WDT function through software programming for enable/disable
and interval setting
-General system reset
On-board Ethernet LAN
-Two Gigabit Ethernet (10/100/1000 Mbits/sec) LAN ports using Realtek
RTL8111G-CG GbE Ethernet Controller
High Drive GPIO
-One pin-header for 8 bit GPIO
System Monitoring Feature
-Monitor system temperature and major power sources.
Outline Dimension (L x W)
-170mm(6.69’’) x 170mm(6.69’’)
Power Requirements
Item Power ON
Full Loading
10Min
Full Loading
30Min
CPU +12V 1.391.531.55
System +12V 0.670.610.64
System +3.3V0.560.660.67
System +5V 1.511.711.68
System+ Device +12V2.792.782.76
System+ Device +5V1.412.422.48
USB2.0 Loading Test4.87~4.94 V/ 530 mA
USB3.0 Loading Test4.79 V/ 1060 mA

System Overview
WADE-8016 User’s Manual 1-4
Configuration
CPU Type Intel® Celeron® CPU G1820 @ 2.70GHz L3: 2MByte
SBC BIOS Portwell, Inc. WADE-8016-APK TEST BIOS (40528T00)
Memory WARIS DDR3 UB-DIMM 1333 8GB*2
(Hynix H5TQ4G83MFR)
VGA Card Onboard Intel® HD Graphics
VGA Driver Intel® HD Graphics Version: 10.18.10.3496
LAN Card Onboard Realtek RTL8111F PCIe GBE Family Controller
LAN Driver Realtek RTL8111F PCIe GBE Family Controller
Version: 8.20.815.2013
LAN Card Onboard Realtek RTL8111F PCIe GBE Family
Controller#2
LAN Driver Realtek RTL8111F PCIe GBE Family Controller#2
Version: 8.20.815.2013
Audio Card Onboard Realtek ALC892 High Definition Audio
Audio Driver Realtek ALC892 High Definition Audio
Version: 6.0.1.7240
Chip Driver Intel® H81 Chipset Device Software Version: 10.0.13
USB 3.0 Driver Intel® USB3.0 eXtensible Host Controller
Version:6.2.9200.16384
SATA HDD Seagate ST3500411SV 500GB
CFEX WARIS CFEX 8GB
CDROM ASUS DRW-24D3ST
Power Supply HG2-6350P 350W
Operting Temperature
0 °C ~ 60 °C
Storage Temperature
-20 ~ 80 °C
Relative Humidity
0% ~ 90%, non-condensing
Operting Temperature
0 °C ~ 60 °C
Storage Temperature
-20 ~ 80 °C
Relative Humidity
0% ~ 90%, non-condensing

System Overview
WADE-8016 User’s Manual 1-5
1.3.1 Mechanical Drawing

System Overview
WADE-8016 User’s Manual 1-6
1.4 System Architecture
All of details operating relations are shown in WADE-8016 System Block Diagram.
WADE-8016 System Block Diagram

Hardware Configuration
WADE-8016 User’s Manual 2-1
Chapter 2
Hardware Configuration
This chapter gives the definitions and shows the positions of jumpers, headers
and connectors. All of the configuration jumpers on WADE-8016 are in the proper
position. The default settings shipped from factory are marked with an asterisk
2.1 Jumper Setting

Hardware Configuration
WADE-8016 User’s Manual 2-2
JP1:Case Open Pin Header
PIN No. Signal Description
1-2 open Disable
1-2 short Enable
JP2: External COM Port 4 (RS-232 Only)
PIN No. Signal Description PIN No. Signal Description
1 DCD#4 2 RXD#4
3 TXD#4 4 DTR#4
5 GND 6 DSR#4
7 RTS#4 8 CTS#4
9 RI#4 10 KEY
JP3: CEEX / SATA Select
PIN No. Signal Description
1-2 short CFEX Enable , SATA J24 Disable
1-2 open SATA J24 Enable , CFEX Disable
JP4: Clear CMOS Select
PIN No. Signal Description
1-2 short Normal
2-3 short Clear CMOS
JP5: Auto Power Button Select
PIN No. Signal Description
1-2 short Enable (AT Mode)
1-2 open Disable (ATX Mode)
JP6: CFEX-SPI / SPI Select
PIN No. Signal Description
1-2 short CFEX-SPI (Boot from J29 SPI ROM)
1-2 open SPI (Boot from U21 EEPROM)
J4: Key Board / Mouse Connector (PS/2)
PIN No. Signal Description PIN No. Signal Description
1 MS_DT 2 KB_DT
3 NC 4 NC
5 GND 6 GND
7 5VDUAL 8 VKBMS
9 MS_CK 10 KB_CK

Hardware Configuration
WADE-8016 User’s Manual 2-3
J9: SMBus Connector
PIN No. Signal Description PIN No. Signal Description
1 SMBus Clock 2 NC
3 GND 4 SMBus Data
5 +5V
J10: General Purpose I/O Connector
PIN No. Signal Description PIN No. Signal Description
1 GPIO 50 2 GPIO 54
3 GPIO 51 4 GPIO 55
5 GPIO 52 6 GPIO 56
7 GPIO 53 8 GPIO 57
9 GND 10 +5V
J11: External COM Port 3 (RS-232 Only)
PIN No. Signal Description PIN No. Signal Description
1 DCD#3 2 RXD#3
3 TXD#3 4 DTR#3
5 GND 6 DSR#3
7 RTS#3 8 CTS#3
9 RI#3 10 KEY
J12: External USB 3.0 Connector
PIN No. Signal Description PIN No.
Signal Description
1 5VDUAL 11 USB2_P0_DP_R
2 USB3_RX1_DN_R 12 USB2_P0_DN_R
3 USB3_RX1_DP_R 13 GND
4 GND 14 USB3_TX2_DN_R
5 USB3_TX1_DN_R 15 USB3_TX2_DP_R
6 USB3_TX1_DP_R 16 GND
7 GND 17 USB3_RX2_DN_R
8 USB2_P0_DN_R 18 USB3_RX2_DP_R
9 USB2_P0_DP_R 19 5VDUAL
10 GND

Hardware Configuration
WADE-8016 User’s Manual 2-4
J13: TPM Connector
PIN No. Signal Description PIN No. Signal Description
1 TPM Clock 2 Ground
3 LFRAME# 4 NC
5 PLTRST# 6 +5V
7 LAD3 8 LAD2
9 +3.3V 10 LAD1
11 LAD0 12 Ground
13 SMB_CLK 14 SMB_DATA
15 3VSB 16 SERIRQ
17 GND 18 NC
19 NC 20 NC
J14: 4 Pin ATX Power Connector
PIN No. Signal Description PIN No.
Signal Description
1 GND 2 GND
3 +12V 4 +12V
J15: CPU Fan Connector
PIN No. Signal Description PIN No.
Signal Description
1 GND 2 +12V
3 Fan on/off output 4 Fan Speed control
J16: Battery Connector
PIN No. Signal Description PIN No.
Signal Description
1 +3.3V 2 GND
J17: 24 Pin ATX Power Connector
PIN No. Signal Description PIN No.
Signal Description
1 +3.3V 2 +3.3V
3 GND 4 +5V
5 GND 6 +5V
7 GND 8 ATX Power OK
9 +5VSB 10 +12V
11 +12V 12 +3.3V
13 +3.3V 14 -12V
15 GND 16 PS_ON#
17 GND 18 GND
19 GND 20 NC
21 +5V 22 +5V
23 +5V 24 GND

Hardware Configuration
WADE-8016 User’s Manual 2-5
J19: Front Pannel Connector
PIN No. Signal Description PIN No.
Signal Description
1 PWR_LED(+) 2 Speaker(+)
3 PWR_LED(-) 4 NC
5 J7LAN_ACT(+) 6 NC
7 J7LAN_LINK(-) 8 Speaker(-)
9 J8LAN_LINK(-) 10 GND
11 J8LAN_ACT(+) 12 Power Button
13 HDD_LED(+) 14 Rest
15 HDD_LED(-) 16 GND
J20 / J21: USB 2.0 Connector
PIN No. Signal Description PIN No.
Signal Description
1 5V Dual 2 5V Dual
3 USB- 4 USB-
5 USB+ 6 USB+
7 GND 8 GND
9 NC 10 GND
J22: System Fan Connector
PIN No. Signal Description PIN No.
Signal Description
1 GND 2 +12V
3 Fan on/off output
J3: COM1/COM2 Serial Port Connector ( RS-232 / 422 / 485 )
PIN No Signal Description
RS-232 RS-422
(COM2)
RS-485 (COM2)
1 DCD (Data Carrier
Detect)
TX- DATA-
2 DSR (Data Set Ready)
N/C N/C
3 RXD (Receive Data) TX+ DATA+
4 RTS (Request to
Send)
N/C N/C
5 TXD (Transmit Data)
RX+ N/C
6 CTS (Clear to Send) N/C N/C
7 DTR (Data Terminal
Ready)
RX- N/C
8 RI (Ring Indicator) N/C N/C
9 GND (Ground) GND GND
10 N/C N/C N/C

Hardware Configuration
WADE-8016 User’s Manual 2-6
J5: Audio connector
PIN No. Signal Description
Red Mic
Green Line-Out
Blue Line-In
Connector Allocation
I/O peripheral devices are connected to the interface connectors.
Connector Function List
Connector Function Remark
J2 DVI + VGA Connector
J3 COM Port 1 and COM Port 2 COM1 Onl
y
Support
RS-232
COM2 Support
RS-232/422/485
J4 Key Board / Mouse Connector (PS/2)
J5 Audio Connector
J6 HDMI Connector
J7 RJ45 (LAN#1) Connector + USB 2.0 Connector
J8 RJ45 (LAN#2) Connector + USB 2.0 Connector
J9 SMBus Connector
J10 General Purpose Connector
J11 External COM Port 3 Connector Only Support RS-232
J12 External USB 3.0 Connetor
J13 TPM Connector
J14 4 Pin ATX Power Connector
J15 CPU Fan Connector
J16 Battery Cpnnector
J17 24 Pin ATX Connector
J18 PCIE X16 Connector Support to PCIE Gen2
(H81 Support Gen2
only)
J19 Front Pannel Connector
J20 External USB 2.0 Connetor
J21 External USB 2.0 Connetor
J22 System Fan Connector
J23 SATA Gen2 Connector Support to SATA
Gen2
J24 SATA Gen2 Connector Support to SATA
Gen2

Hardware Configuration
WADE-8016 User’s Manual 2-7
Switch with J29
(CFEX-SATA)
J25 SATA Gen3 Connector Support to SATA
Gen3
J26 SATA Gen3 Connector Support to SATA
Gen3
J27 DDR3 Slot(Channel A) DDR3-1333
(G1820 Support 1333
only)
J28 DDR3 Slot(Channel B) DDR3-1333 (G1820
Support 1333 only)
J29 CFEX Connector Switch with J24
( SATA )
Switch with U21
( SPI )
JP1 Case Open Enable
JP2 External COM Port4 COM4 Only Support
RS-232
JP5 Auto Power Button Enable Swith ATX Mode and
AT Mode
JP6 CFEX-SPI / SPI Switch
SW1 ATX Detect &BIOS Recovery Switch
U16 Haswell PCH H81
U17 Haswell CPU Socket
U21 BIOS Socket Switch with J29
( CFEX-SPI )
Note:
JP3 controll enable the J24 or CFEX
JP6 controll boot from the SPI-ROM or CFEX-SPI ROM

System Installation
WADE-8016 User’s Manual 3-1
Chapter 3
System Installation
This chapter provides you with instructions to set up your system. The additional
information is enclosed to help you set up onboard PCI device and handle Watch
Dog Timer (WDT) and operation of GPIO in software programming.
3.1 IntelHaswell Processor
LGA-1155 CPU Socket
In the top, right corner of the CPU Socket is Pin1, and the red two circles are
alignment key under the picture.
LGA-1155 CPU
In the top, the Yellow Triangle of the CPU is Pin1.
Please remember to locate the alignment keys on the CPU socket of the
motherboard and the notches on the CPU.
Alignment key
Notch

System Installation
WADE-8016 User’s Manual 3-2
LGA-1155 CPU Installation Steps
Before install the CPU, please make sure to turn off the power first!!
1. Open the load lever.
2. Lift the load lever up to fully open
3. Remove the plastic cap on the CPU socket. Before you install the CPU, always
cover it to protect the socket pin.

System Installation
WADE-8016 User’s Manual 3-3
4. After confirming the CPU direction for correct mating, put down the CPU in
the socket housing frame. Note that alignment keys are matched.
5. Make sure the CPU has been seated well into the socket. If not, take out the
CPU and reinstall.

System Installation
WADE-8016 User’s Manual 3-4
6. Engage the load lever while pressing down lightly onto the load Plate