Portwell PEB-7710VLA User manual

PEB-7710VLA
Embedded System Board
User's Manual
P/N: B8980065 Version 0.1
Copyright © Portwell, Inc., 2003. All rights reserved.
All other brand names are registered trademarks of their respective owners.


 

How to Use This Manual
 
1.1 Introduction..................................................................................................................................1-1
1.2 Check List......................................................................................................................................1-3
1.3 Product Specifications.................................................................................................................1-3
1.3.1 Mechanical and Environmental.......................................................................................1-5
1.3.2 Mechanical Drawing .........................................................................................................1-6
1.4 System Architecture.....................................................................................................................1-7

2.1 Jumper Setting..............................................................................................................................2-2
2.2 Connectors....................................................................................................................................2-3
 
3.1Socket 478 Pentium 4/Celeron Processor................................................................................3-1
3.2Main Memory..............................................................................................................................3-2
3.3Installing the Single Board Computer......................................................................................3-2
3.4Installing Single Board Computer............................................................................................3-3
3.4.1INF Chipset Component Driver......................................................................................3-3
3.4.2Intel 852 GME Graphics Controller.................................................................................3-3
3.4.3Intel Fast Ethernet Controller ..........................................................................................3-4
3.4.4Intel 82801DB AC’97 Codec Controller..........................................................................3-5
3.5Clear CMOS Operation..............................................................................................................3-5
3.6GPIO.............................................................................................................................................3-6
  
4.1 System Overview.........................................................................................................................4-1
4.2 Advanced Settings.......................................................................................................................4-2
4.3 Advanced PCI/PnP Settings....................................................................................................4-14
4.4 Boot Settings...............................................................................................................................4-16
4.5 Security Settings.........................................................................................................................4-20
4.6 Advanced Chipset Settings.......................................................................................................4-21
4.7 Exit Option..................................................................................................................................4-26
!"#!
5.1 Quick hardware installation.......................................................................................................5-1
5.2 BIOS Setting..................................................................................................................................5-5
5.3 OS Diagnostics..............................................................................................................................5-6
5.4 FAQ................................................................................................................................................5-8
$%$
$% 


 
How to Use This Manual
The manual describes how to configure your PEB-7710VLA system to meet various
operating requirements. It is divided into four chapters, with each chapter
addressing a basic concept and operation of Embedded Board Computer.
Chapter 1: Introduction. This chapter presents what you have in the inside of box
and give you an overview of the product specifications and basic system architecture
for this model of single board computer.
Chapter 2: Hardware Configuration Setting. This chapter shows the definitions and
locations of Jumpers and Connectors that you can easily configure your system
Chapter 3: System Installation. This chapter describes how to properly mount the
CPU and main memory, M-system Flash disk, or optional flat panel display interface
module to get a safe installation and give you a programming guide of Watch Dog
Timer function. Besides, it will introduce and show you the driver installation
procedure about Graphics Controller.
Chapter 4: BIOS Setup Information. This chapter specifies the meaning of each
setup parameters and how to get advanced BIOS performance and update new
BIOS. In addition, POST checkpoint list will give you a guide of trouble-shooting.
Chapter 5: Troubleshooting. Provides you a few useful tips to quickly get your PEB-
7710VLA running with no failure. As basic hardware installation has been
addressed in Chapter 3, this chapter will basically focus on system integration issues,
in terms of backplane setup, BIOS setting, and OS diagnostics.
The content of this manual and EC declaration document is subject to change
without prior notice. These changes will be incorporated in new editions of the
document. Portwell may make supplement or change in the products described in
this document at any time.
Updates to this manual, technical clarification, and answers to frequently asked
questions will be shown on the following web site http://www.portwell.com


 
EC Declaration of Conformity
(To Be Added)
For the following equipment:
Product Name:
Model Name:
Trade Name:
is herewith confirmed to comply with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility Directive (89/336/EEC). The equipment was
evaluated and passed the test, the following standards were applied :
EMC : EN 55022 (1994/A1:1995 Class A)
EN 50082-2 (1991)
EN 61000-4-2 (1995)
EN 61000-4-3 (1996)
EN 61000-4-4 (1995)
EN 61000-3-2 (1995)
EN 61000-3-3 (1995)
The following manufacturer is responsible for this declaration :
Portwell, Inc.
(Company Name)
3F, No.88, Sec.1, Nei-Hu Rd., Taipei, Taiwan, R.O.C.
(Company Address)
Taipei, R.O.C.
Place Date Legal Signature of
Authorized Person


 


This manual describes in detail the Portwell PEB-7710VLA Embedded System Board.
This manual aims to provide all necessary information to users who may interest in
using all PEB-7710VLA’s functions.
Please be aware that it is possible to create configurations within the CMOS RAM
that make booting impossible. If this should happen, clear the CMOS settings, (see
the description of the Jumper Settings for details).
We strongly recommend that you study this manual carefully before attempting to
alter PEB-7710VLA’s configurations. In the case, something in this manual is not
clear or users have any suggestion on this manual. Contact our Customer Service
department with the relevant details. Portwell Technical Service Group’s web site is
http://www.portwell.com.tw/
 
PEB-7710VLA is Portwell’s answer to a low cost, off-the-shelf, Point-of-Sale (POS)
applied computing platform powered by Intel Pentium® 4 processor or Intel
Celeron® processor. It utilize the Embedded ATX (EmbATX) form factor and have a
feature set targeted at the POS market, but could be used for many other vertical
markets as well. It provides innovative, high integration, high quality Embedded
System Board to fulfill the embedded computing market.
The board is based on Intel 852GME chipset and latest high performance processor,
Intel Pentium®4 / Celeron® processor, running at up to 3.06GHz with 533Mhz
Process system bus that built on Intel®0.13 micron processor technology and later of
90nm process technology Prescott processor in H2/2003. With Intel 852GME chipset
that support high speed ECC DDR SDRAM, high-performance graphic controller
AGP 4X controller with dual display/Panel and one Intel fast/gigabit Ethernet
connection enable Portwell’s PEB-7710VLA to provide most versatile Embedded
System Board (ESB) in the market.
All in all, PEB-7710VLA is designed to meet all kind of embedded computing
application including POS, ATM, Kiosk, Transaction Terminal and Medical
equipment.


  
Key Features:
!"Pentium®4 or Celeron®CPU (Socket 478) 1.7~3.06 GHz (Northwood &Prescott)
!"Intel®852GME integrated high performance 2D/3D graphics
!"Integrated CRT/LCD (DVI/LVDS) controller
!"Dual independent display & four serial ports
!"8Mbit flash ROM for easy BIOS upgrade and video BIOS for DFP
!"PCI expansion slot (EmbATX defined)
!"Single Ethernet (10/100) with RJ-45 connector; Gigabit Ethernet optional
!"AC’97 audio with 2-channel amplifier@6W
!"Trusted computing module for transaction security
Tabled Features
System
CPU Intel socket 478 Pentium4 3.06GHz /Celeron 1.7/2.6GHz
System Memory Two 184-pin DIMM socket, maximum 2GB DDR 200/266
SDRAM
L2 Cache Memory 512KB
Chipset Intel 852GME
BIOS AMI
Storage Devices Four IDE devices at UMDA66/100; two FDDs
Hardware Monitoring National LM85 with three FAN inputs
Expansion Riser PCI expansion x 1
Power Requirement ATX 12V Version1.1
Operating Temperature 0~45 °C
Storage Temperature -20~75 °C
Operating Humidity 5~95%
Dimension EmbATX R1.2: 243.84mm(L)X243.84mm(W)
I/O
MIO RS232 X4: Two DB9 & Two pin header
Ethernet Intel 82562/82551/82540
Audio AC ’97 2.2
USB USB 2.0 x4 & Power USB x 2: two pin-header, Two type
A and Two Power USB port
IrDA Yes
Mouse & K/B 1
Display
Chipset Intel 852GME GMCH
Display Memory 64MB shared DDR SDRAM (DVMT)
Resolution 1600 x 1200 x 8bpp or 1280 x 1240 x 16bpp
LCD/Panel interface LVDS, DVI Resolution, Dual Display support



 !
 
The PEB-7710VLA package includes the following basic items accompany with this
manual.
#"HDD/FDD cable
#"Utility CD
#"User Manual
If any of these items is damaged or missed, please contact your vendor and save all
packing materials for future replacement and maintenance.
 
!"Chipset
- Intel 852GME
- Intel GMCH and Intel ICH4
!"CPU
- Intel Pentium 4/Celeron (Northwood & Prescott/533Mhz)
- 478 socket Pentium 4 Processor up to 3.06GHz
- FSB speed 400/533MHz
- On-die L2 cache
!"System memory
- Two 184-pin DIMM sockets
- Supports 266/333MHz DDR SDRAM up to 2GB
- Available bandwidth up to 2.7GB/s (DDR333)
- 64/128/256/512 Mb SDRAM technologies
- 2.5V DDR SDRAM support
- Registered DIMM not supported
- Support ECC functionality
!"Display controller
- Intel GMCH Integrated Graphics controller
- Integrated AGP 4X 2D/3D engine
- One VGA port for CRT monitor 1600X1200@8bpp; 1280X1024@16bpp
- Digital flat panel support
2-channel LVDS port
1600X1200@24-bit colors per pixel (UXGA+)
One DVI-I port with Silicon Image Sil164
- Dual independent displays
- BIOS setting primary video port
- Shared system memory up to 64MB (DVMT)


 "
!"System BIOS
- System BIOS AMI Code8
- 8 Mbit (PLCC socket)
- Field upgradeable
!"Storage
- IDE Interface
Two 40-pin (2.54 pitch) IDE connector support four IDE devices
PIO/4 through ATA-100
-FDC
Support 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB Floppy Disk interface up
to two drivers
!"On Board I/O
- I/O
Support four RS-232 ports (Two DB9 & Two pin header)
Parallel port support IEEE1284/SPP/EPP/ECP
Support six USB 2.0 Ports: Two pin header, Two type A and Two Power USB
Support one IrDA (share one serial port)
6-pin digital I/O for control and management
ESD protected
!"Hardware Monitoring
- Support CPU voltage, temperature and three FAN monitoring
!"PCI Expansion
- One, two or three PCI slot (32-bit X 33MHz PCI 2.2) with EmbATX riser card
- One standard EmbATX riser card connector
- Three PCI slot for up to 2U chassis
- One PCI slot for slim sized 1U chassis
!"Ethernet
- Intel 82562/82551/82540
- One fast Ethernet support 10/100/1000 Mbps
- RJ-45 connectors with indicators
- MAC/PHY/Transceiver 3-in-1 (82562)
- Through PCI bus (82551/82540)
- With Boot-ROM
- Support Wake-on-LAN
!"Audio
- AC97 v2.2 CODEC
- MIC-in/Line-in/Line-out (headphone) connector
- Amplified stereo output header on board
- Philips amplifier solution
!"Real Time Clock (RTC)/Calendar
- Compatible for 7 years of data retention to support real Y2K
- An external Li battery
- Over current protection to comply with IEC 601


 #
!"Power on/off
- Soft on and 4 second override
- Header for connection to membrane switch
!"Wake on LAN & modem Ring On
- Support ATX function with 4-pin header connect to back plane
!"Keyboard and PS/2 Mouse interface
- Support one mini-DIN 6-pin connectors for keyboard and mouse
!"Internal Connector
- IDE connector x 2
- 4-pin CD in
- 50-pin LCD LVDS interfaces
- 7-pin LCD inverter interface
- PS/2 mouse connector
- 4-pin ATX 12V CPU power header
- 20-pin standard ATX power connector
- 8-pin header for connection to membrane switch panel
- 2-pin reset header
- 9-pin header for USB
 
!"Power consumption: [email protected]; [email protected]; [email protected]
!"Typical power requirement: ATX 12V Version1.1
!"Operating temperature:0 to 45°C
!"Storage temperature: -20 to 75°C
!"Relative humidity: 5% to 95%, non-condensing
!"Board size:(LxW) 243.84 mm X 243.84mm


 $
 


 
  
The following block diagram shows the architecture and main components of PEB-
7710VLA.


























!" !!
#










 !





 
!"#$
%&
'

&
(!##$)
$

*
++
Figure 1-2 PEB-7710VLA System Block Diagram

%&'()()
 


This chapter gives the definitions and shows the positions of jumpers, headers and
connectors. All of the configuration jumpers on PEB-7710VLA are in the proper
position. The default settings shipped from factory are marked with a star (!).
Figure 2-1 PEB-7710 Jumper Location

%&'()()
  
 !"
COM1 RI#1 /+12V Selection (JP1)
JP1 Function
1-2 Short +12V
2-3 Short RI#1 !
COM2 RI#2 /+12V Selection (JP2)
JP2 Function
1-2 Short +12V
2-3 Short RI#2 !
COM3 (J10) RI#3 /+12V Selection (JP3)
JP3 Function
1-2 Short +12V
2-3 Short RI#3 !
COM4 (J11) RI#4 /+12V Selection (JP4)
JP4 Function
1-2 Short +12V
2-3 Short RI#4 !
CMOS Clear (JP5)
JP4 Function
1-2 Short Clear CMOS Disable !
2-3 Short Clear CMOS Enable

%&'()()
 !
 
I/O peripheral devices are connected to the interface connectors on this
EmbeddedATX computer (Figure 2-2)
Figure 2-2 PEB-7710VLA Connector Location

%&'()()
 "
Connector’s Function List
Connector Function Remark
J1 Audio Jack Connector
J2 DVI-I Connector
J3 CRT Connector
J4 PowerUSB 1 Connector
J5 PowerUSB 2 Connector
J6 PS/2 keyboard/Mouse Connector
J7 Parallel Port Connector
J8 Ethernet RJ-45 & USB1/2 Connector
J9 Audio Header Connector
J10 COM3 Serial Port (RS-232)
J11 COM4 Serial Port (RS-232)
J12 REAR FAN Connector
J13 4-pin ATX Power Connector
J14 Audio CD-in Connector
J15,J16 RISC PCI Connector
J17 LVDS Backlight Power Connector
J18 CPU Fan Connector
J19 Case Open Detect Connector
J20 USB3 Header
J21 FRONT Fan Connector
J22 Daughter Card Interface
J23 External Wake On LAN Header
J24 Secondary IDE Connector (IDE2)
J25 IrDA Connector
J26 Primary IDE Connector (IDE1)
J27 FDC Interface Connector
J28 ITP Debug Port
J29 Power/LED Header
COM1/COM2 COM1 & COM2 Serial Port (RS-232)
LVDS1 LVDS & Backlight Connector
PW1 20-pin ATX Power Connector
USB1 PowerUSB 3 Connector

%&'()()
 #
Pin Assignments of Connectors
J1: Audio Jack Connector
PIN No. Signal Description
1 Line In
2 Line Out
3 Mic In
J2: DVI-I Connector
PIN No. Signal Description PIN No. Signal Description
1 DATA2- 2 DATA2+
3 Ground 4 NC
5 NC 6 DDCCLK
7 DDCDATA 8 VSYNC
9 DATA1- 10 DATA1+
11 Ground 12 NC
13 NC 14 +5V
15 Ground 16 HPDET
17 DATA0- 18 DATA0+
19 Ground 20 NC
21 NC 22 Ground
23 CLK+ 24 CLK-
C1 RED C2 GREEN
C3 BLUE C4 HSYNC
C5 Ground

%&'()()
 $
J3: CRT Connector
PIN No. Signal Description PIN No. Signal Description
1 RED 2 GREEN
3 BLUE 4 ID0
5 Ground 6 Ground
7 Ground 8 Ground
9 NC 10 Ground
11 ID1 12 DDCDATA
13 HSYNC 14 VSYNC
15 DDCCLK
J4/J5/USB1: PowerUSB Connector
PIN No. Signal Description PIN No. Signal Description
1 +5V 5 Ground
2 USBDATA- 6 +12V
3 USBDATA+ 7 +12V
4 Ground 8 Ground
J6: PS/2 Keyboard / Mouse Connector

%&'()()
 
J7: Parallel Port Connector
PIN No. Signal Description PIN No. Signal Description
1 Strobe# 14 Auto Form Feed#
2 Data 0 15 Error#
3 Data 1 16 Initialization#
4 Data 2 17 Printer Select IN#
5 Data 3 18 Ground
6 Data 4 19 Ground
7 Data 5 20 Ground
8 Data 6 21 Ground
9 Data 7 22 Ground
10 Acknowledge# 23 Ground
11 Busy 24 Ground
12 Paper Empty 25 Ground
13 Printer Select
J8: Ethernet RJ-45 & USB 1/2 Connector
PIN No. Signal Description PIN No. Signal Description
1 +5V 2 USBDATA0-
3 USBDATA0+ 4 Ground
5 +5V 6 USBDATA1-
7 USBDATA1+ 8 Ground
9 TD4+ 10 TD4-
11 TD3+ 12 TD3-
13 TD2+ 14 TD2-
15 TD1+ 16 TD1-

%&'()()
 *
J9: Audio Header Connector
PIN No. Signal Description PIN No. Signal Description
1 MIC_Power 2 Ground
3 MIC_Vref 2.25V 4 +5V
5 LINOUT_R 6 NC
7 NC
9 LINOUT_L 10 NC
11 AMP_Out_R 12 Ground
13 AMP_Out_L 14 Ground
J10/J11: COM3/COM4 Serial Port Connector
PIN No. Signal Description
1 DCD (Data Carrier Detect)
2 RXD (Receive Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request to Send)
8 CTS (Clear to Send)
9 RI (Ring Indicator) or +12V
10 N/C
J12/J18/J21: REAR/CPU/FRONT FAN Connector
PIN No. Signal Description
1 Ground
2 +12V
3 Fan Speed Detecting signal

%&'()()
 +
J13: 4-Pin ATX Power Connector
PIN No. Signal Description
1 Ground
2 Ground
3 +12V
4 +12V
J14: Audio CD- in Connector
J15/16: RISC-PCI Connector
J17: LVDS Backlight Power Connector
PIN No. Signal Description
1 +12V
2 +12V
3 Ground
4 +3.3V
5 NC
6 PANELBKLTCTL
7 PANELBKLTEN
J19: Case Open Detect Connector
PIN No. Signal Description
Short Case Open
Open Case Closed