Portwell ROBO-8113VG2AR User manual

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
1
PICMG 1.3 Single Host Board
Version 1.1
ROBO-8113VG2AR

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
2
Revision History
R1.0
Preliminary

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
3
Contents
1 Introduction............................................................................................................................................................................................................................10
2 Specifications..........................................................................................................................................................................................................................11
2.1 Supported Operating Systems..............................................................................................................................................................................12
2.2 Mechanical Dimensions........................................................................................................................................................................................13
2.3 Power Consumption.............................................................................................................................................................................................15
2.4 Environmental Specifications................................................................................................................................................................................16
3 Hardware Configuration.........................................................................................................................................................................................................18
3.1 Jumpers and Connectors .....................................................................................................................................................................................18
3.2 Jumpers Settings..................................................................................................................................................................................................19
3.3 Connector Settings...............................................................................................................................................................................................22
4 Signal Descriptions................................................................................................................................................................................................................29
4.1 Watch Dog Signal.................................................................................................................................................................................................29
4.2 GPIO Signal..........................................................................................................................................................................................................31
5 System Resources.................................................................................................................................................................................................................32
5.1 Intel® Skylake-S PCH..........................................................................................................................................................................................32
5.2 Main Memory........................................................................................................................................................................................................32
5.3 Installing the Single Board Computer...................................................................................................................................................................33
5.3.1 Chipset Component Driver.....................................................................................................................................................................................33
5.3.2 Intel® HD Graphics 530 .........................................................................................................................................................................................34
5.3.3 Intel LAN I210AT/I219LM Gigabit Ethernet Controller............................................................................................................................................34

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
4
6 BIOS Setup Items..................................................................................................................................................................................................................35
6.1 Introduction...........................................................................................................................................................................................................35
6.2 BIOS Setup...........................................................................................................................................................................................................35
6.2.1 Main.......................................................................................................................................................................................................................37
6.2.2 Configuration..........................................................................................................................................................................................................39
6.2.3 Security..................................................................................................................................................................................................................83
6.2.4 Boot........................................................................................................................................................................................................................85
6.2.5 Save & Exit.............................................................................................................................................................................................................87
7 Troubleshooting.....................................................................................................................................................................................................................89
7.1 Hardware Quick Installation..................................................................................................................................................................................89
7.2 BIOS Setting.........................................................................................................................................................................................................91
7.3 FAQ......................................................................................................................................................................................................................92
8 Portwell Software Service......................................................................................................................................................................................................97
9 Industry Specifications...........................................................................................................................................................................................................98
9.1 Industry Specifications..........................................................................................................................................................................................98

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
5
Preface
This user’s guide provides information about the components, features, connectors and BIOS Setup menus available on the ROBO-8113VG2AR. This
document should be referred to when designing PICMG 1.3 application. The other reference documents that should be used include the following:
Intel SkyLake-S/KabyLake-S Design Guide
Intel SkyLake-S/KabyLake-S Specification
Please contact Portwell Sales Representative for above documents.
Disclaimer
The information contained within this user’s guide, including but not limited to any product specification, is subject to change without notice.
Portwell provides no warranty with regard to this user’s guide or any other information contained herein and hereby expressly disclaims any implied warranties
of merchantability or fitness for any particular purpose with regard to any of the foregoing. Portwell assumes no liability for any damages incurred directly or
indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user’s guide. In no event
shall Portwell be liable for any incidental, consequential, special, or exemplary damages, whether based on tort, contract or otherwise, arising out of or in
connection with this user’s guide or any other information contained herein or the use thereof.
Trademarks
Product names, logos, brands, and other trademarks featured or referred to within this User’s guide or the Portwell website, are the property of their respective
trademark holders. These trademark holders are not affiliated with Portwell, our products, or our website.

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
6
Warranty
Portwell makes no representation, warranty or guaranty, express or implied regarding the products except its standard form of limited warranty (“Limited
Warranty”). Portwell may in its sole discretion modify its Limited Warranty at any time and from time to time.
Beginning on the date of shipment to its direct customer and continuing for the published warranty period, Portwell represents that the products are new and
warrants that each product failing to function properly under normal use, due to a defect in materials or workmanship or due to non conformance to the agreed
upon specifications, will be repaired or exchanged, at Portwell’s option and expense.
Certification
Portwell is certified to DIN EN ISO 9001:2000 standard.
Technical Support
Portwell technicians and engineers are committed to providing the best possible technical support for our customers so that our products can be easily used and
implemented.
We request that you first visit our website at http://www.portwell.com.tw/support/ for the latest documentation, utilities and drivers, which have been made
available to assist you. If you still require assistance after visiting our website then contact our technical support department by email at
[email protected]ortwell.com.twfor further assistance. Thank you!

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
7
Handling and Installing SBC
Caution: Do not just hold any single side of the SBC; hold evenly on both sides!
Heavy processor cooler may bend the SBC when SBC being held just on one side.
The bending may cause soldering or components damaged.
Notice
SBC Handling and Installation Notice

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
8
Fix your SBC in System
Caution: Suggest your S.I or vendor to use a metal bracket to hold/fix the desktop or server grade SBC to avoid the vibration damage during transportation. Heavy processor
cooler may bend the SBC when systems are during transportation without any holder.
Example:
4U chassis :
Use Ltype mental or plastic or rubber bracket to hold SBC.

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
9
2U or 1U chassis: a mental bracket on the bottom of chassis to balance and support SBC from bending.

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
10
1Introduction
ROBO-8113VG2AR, a PICMG 1.3 Single Host Board (SHB) with the latest Intel 7th and 6th Generation Core processors supported from E3 class Xeon
processors to Core i3 processors. Portwell's ROBO-8113VG2AR implements flexible PCI Express Gen 3 expansion by one PCI Express x16 or two PCI Express
x 8 or one PCI Express x8 and two PCI Express x4 with dedicated processor sku, which is ideal for a range of applications, such as IndustrialAutomation,
Digital Signage, and Medical.
ROBO-8113VG2AR adopt Intel C236 and Q170 PCH. Providing up to 32GB DDR4 system memory supported with ECC or non-ECC option.
ROBO-8113VG2AR with the 7th and 6th generation Intel® processor family features and integrated, enhanced graphics engine which provides significant 3D
performance, up to DirectX® 12. It supports triple display function via DVI-I (VGAand DVI-D) and HDMI up to 4Kx2K. Rich I/O functions are also provided by
ROBO-8113VG2AR single host board, which is 10x USB 3.0, 2x USB 2.0, 6x SATA III ports (dual ports via backplane), 2x RS232 ports, 2x smart COM ports
which select RS232/422/485 mode by bios adjustment, and dual Intel GbE LAN ports. It also supports on board TPM 2.0 to secure your applications.
For the industries who already have large install based systems, ROBO-8113VG2AR not only provides a way to upgrade to use the latest Intel processors, but
also supporting legacy elements such as VGA, four PCI expansion, four Serial ports and PS/2 Keyboard and Mouse.

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
11
2Specifications
Main Processor ◆Intel® Kaby Lake-S/Skylake -S E3-12xxv5/v6 and Core™ i Processors
System BIOS ◆AMI UEFI BIOS
Main Memory ◆
Up to 32 GB ECC or non-ECC DDR4 on two Long-DIMM sockets. Supports dual channel DDR4
1866/2133 MHz SDRAM
Graphics
◆
Controller: Intel® Gfx Gen 9, HD graphics
◆VGA: Resolution up to 1920 x 1200 @ 60Hz
◆DVI-D: Resolution up to 1920 x 1200 @ 60Hz
(VGA+DVI-D on bracket by DVI-I port)
◆
HDMI: Resolution up to 4096 x 2160 @ 24Hz
Expansion Interface ◆
From CPU: 1x PCI Express x16 or 2x PCI Express x8 or 1x PCI Express x8 + 2x PCI Express x4 by
jumper setting (Gen3 up to 8.0 GT/s)
◆
From PCH: 1x PCI Express x4 or 4x PCI Express x1 by different bios support (Gen 3 up to 8.0 GT/s)
SATA Interface
◆
Six SATA III ports (SATA 6Gb/s), dual ports via backplane
Input/Output
◆Serial Ports: 2x RS-232 & 2x RS-232/422/485 selectable by bios
◆USB Port: 2x USB 3.0 on bracket, 8x USB 3.0 on board header, 4x USB 2.0 ports through backplane
◆GPIO connector: 8GPI +8GPO
◆Audio Interface: Mic-In / Line-Out / Line-in (on-board header)
Ethernet ◆
Supports dual 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 interface by Intel WGI219LM and
WGI210AT controller
◆
Dual RJ45 connector on bracket
TPM
◆
On-board TPM 2.0 support (TPM IC: Infineon SLB9665TT2.0)
High Drive GPIO ◆One pin-header for GPIO (8bit in &8bit out)

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
12
Mechanical and
environmental specifications
◆Operating temperature: 0 ~ 60° C
◆Storage temperature:-20 ~ 80° C
◆Humidity: 5 ~ 90% non-condensing
◆Power supply voltage: ATX
◆Board size: 338.5mm x 126.39mm, 13.33" (L) x 4.98" (W)
2.1 Supported Operating Systems
The ROBO-8113VG2AR supports the following operating systems.
Windows 7 support
Windows 8.1 / WEI 8.1 support
Windows 10 full support
Kernel.org Distribution

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
13
2.2 Mechanical Dimensions

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
14

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
15
2.3 Power Consumption
Test Configuration
CPU Type
Intel® Core™ i5-6500TE CPU @ 3.2GHz (ES) L3: 6MByte
SBC BIOS
Portwell, Inc. ROBO-8113VG2AR-Q170-PCIE1 TEST BIOS (60105T00)
Memory
WARIS UB-DIMM DDR4 2133 8GB*2 (SEC K4A4G085WD)
VGACard
Onboard Intel® HD Graphics 530
VGADriver
Intel® HD Graphics 530 Version: 20.19.15.4312
LAN Card
Onboard Intel® Ethernet Connection(2) I219-LM
LAN Driver
Intel® Ethernet Connection(2) I219-LM Version: 12.13.17.7
LAN Card
Onboard Intel® I210 Gigabit Network Connection
LAN Driver
Intel® I210 Gigabit Network Connection Version: 12.14.7.0
Audio Card
Onboard RealtekALC886 High DefinitionAudio
Audio Driver
RealtekALC886 High DefinitionAudio Version: 6.0.1.7312
Chip Driver
Intel® Skylake-S Chipset Device Software Version: 10.0.27
USB3.0 Driver
Intel® USB 3.0 eXtensible Host ControllerAdaptation Driver Version: 1.0.1.45
EC Version
51124T00 (11/24/2015)
CDROM
Pioneer DVR-S19LBK
Power Supply
FSP460-60PFB 460W
Carrier Board
PBPE-11A3
USB3.0 HDD
SPArmorA30
SATASSD
PLEXTOR DRAH1T-A74658844

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
16
Power consumption
ATX:
Item Power ON Full Loading 10Min Full Loading 30Min
CPU +12V
1.09A
2.46A
2.38A
System +12V
0.31A
0.41A
0.38A
System +3.3V
1.27A
1.01A
1.02A
System +5V
1.19A
1.63A
1.63A
System+ Device +12V
0.40A
0.94A
0.89A
System+ Device +5V
2.39A
2.64A
2.68A
2.4 Environmental Specifications
Storage Temperature : -20~80°C
Operation Temperature : 0~60°C
Storage Humidity : 5~90%
Operation Humidity: 10~90%

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
17
Block Diagram

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
18
3Hardware Configuration
3.1 Jumpers and Connectors
This chapter indicates jumpers’, headers’ and connectors’locations. Users may find useful information related to hardware settings in this chapter.

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
19
3.2 Jumpers Settings
For users to customize ROBO-8113VG2AR’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not
Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Jumper Table
The jumper settings are schematically depicted in this manual as follows:
Jump Function List:
Jumper
Function
Remark
JP1
Configure PCIEx16, x8 (For C236/Q170 only)
Header2Px2/2.54mm
JP2
Auto Power Button(Reserve)
PH2Px1/2.54mm
JP3
LPC 80 Port Pin Header
Header5Px2/2mm
JP4
Clear CMOS Setup
PH3Px1/2.54mm
JP5
WDT Enable/Disable Pin
PH2Px1/2.54mm
JP6
ATX/AT Select Pin
PH3Px1/2.54mm

ROBO-8113VG2AR
Copyright © Portwell 2016ROBO-8113VG2AR User's Guide
20
JP1: PCI Express* Bifurcation
JP4: Clear CMOS Setup
PIN No.
Description
1-2, Short
3-4, Short
1x8 , 2x4
1-2, Open
3-4, Short
Reserved
1-2, Short
3-4, Open
2x8
1-2, Open
3-4, Open
1x16
PIN No.
Description
1-2, Short
Normal

2-3, Short
Clear CMOS