Potter LED-16F User manual

LED-16 Series
LED Annunciator
8830096 - Rev D • 12/18 PAGE 1 OF 2
Potter Electric Signal Company, LLC • St. Louis, MO • Phone: [phone] • www.pottersignal.com
LED-16 Flush Mount LED-16 Surface Mount
Description
The LED-16 Series is a LED remote annunciator for various Potter
addressable re control panels. The LED-16 Series communicates
using a RS-485 (P-Link) connection to the main panel providing zone
specic indication of Alarm, Supervisory, Trouble conditions.
The LED-16 Series features 2 slide-in labels allowing each of the 16
zones to be customized for any application. It can be ush mounted
or surface mounted. It can be mounted on a single gang electrical box
or a four-square electrical box. The annunciator utilizes a sheet metal
enclosure secured with a Potter lock.
Technical Specications
Standby Current 20 mA
Alarm Current 25 mA
Operating Temperature 0°C-49°C (32°F-120°F)
Operating Humidity Range 0 to 93% (non-condensing)
Maximum Wire Length 6500 ft.
Maximum Annunciators 31
Flush Mount Size
(WxHxD) 11 3/8” x 9-1/4” x 7/8”
Surface Mount Size
(WxHxD) 11 3/8” x 9-1/4” x 3 1/8”
Wire Gauge 12 AWG-22 AWG
Compatible Panels
IPA Series
AFC/ARC Series
PFC-4064
P-Series*
PFC-6000 Addressable Series*
*Legacy Product
Features
• Capable of displaying alarms, supervisory, trouble status for 16
zones
• System Silence and Reset buttons
• Common LEDs for status indication
• Maximum 31 LED-16s for:
PFC-6800, P400(R), IPA-4000, and AFC-1000.
• Maximum 10 LED-16s for:
PFC-6030/6075(R)/6200, P100/200/300, IPA-60, IPA-100, AFC-
50, AFC/ARC-100 and PFC-4064
• Maximum P-Link wire length of 6,500 feet
• Available in four colors
• Product includes a 5 year warranty
• UUKL Listed for Smoke Control
NOTE: LED PWR can be provided by any re listed source. Output
power must be 16 VDC–33 VDC and must be power limited.
7305-0328:0200 UOXX.S2930
firealarmresources.com

8830096 - Rev D • 12/18 PAGE 2 OF 2
Potter Electric Signal Company, LLC • St. Louis, MO • Phone: [phone] • www.pottersignal.com
LED-16 Series
LED Annunciator
LED PWR P-Link
- + - + A B
P-Link from control panel
Example:
Powered by control panel
Power from
auxiliary supply
LED PWR P-Link
- + - + A B
P-Link from
control panel
Example:
Powered by auliliary supply
The LED-16 Series is connected to the re alarm control panel using a four wire RS-485 connection. The connection is power limited and supervised.
Up to 31 LED-16 Series LED annunciators can be connected on PFC series, Potter Plus Series, AFC and IPA series panels.
Installation
Wiring Diagrams
Fig 1
Fig 2
Model Description Stock No.
LED-16F LED Annunciator Flush
Mount 3992727
LED-16 LED Annunciator Surface
Mount 3992666
Ordering Information
Zone labels
may be
inserted
here
Wiring LED-16 Series to Control Panel or Auxiliary Power Example
LED-16 Series Module Showing Front Cover and Board
firealarmresources.com