PowerAcoustik CPAA-70DM User manual

2 DIN 7" Monitor
Touch screen
MP3/MP4
USB/SD
AM/FM Radio
Support Apple CarPlay
Support Android Auto
Support Bluetooth
CPAA-70DM
AV Center
2-DIN Headunit
TM
TM

2
1. Appearance
2. Accessories and Installation
3. Wiring Connection
4. Front panel Description
5. Remote Control
6. Main Menu
7. Settings
8. Apple CarPlay & Android auto
9. Radio
10. USB
11. BT Audio
12. BT Phone
13.AV IN
14.Specification
FCC Notes
Warranty
---------------------------------------------
3
3
5
7
8
9
9
12
12
13
14
15
17
18
19
20
---------------------------------
Content
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------
---------------------------------

Main Menu
Carplay Menu
Android Auto Menu
Appearance Accessories & Installation
(2) Screw 8
(1) Mounting bracket
2
Package contains the following accessories for
installation and operation of the unit.
(3) Remote 1
/
#
1 2 3
4 5 6
7 8 9
/0
EJECT EQ
DISC BT USB
CP/AA
SXM Radio
(4) Trim Ring 1
(5) User Manual 1
3
1. Appearance 2. Accessories & Installation
(7) 4 Pin Connector 1
(6) Wire Harness 1
2 DIN 7" Mo nitor
Touch s creen
MP3/M P4
USB/S D
AM/FM R adio
Suppo rt Appl e CarPl ay
Suppo rt Andr oid Aut o
Suppo rt Blue tooth
CPAA -70DM
AV Ce nter
2-D IN Head unit
TM
TM

4
2. Accessories & Installation
Installation
1.Put the 2 brackets to the left and right
side of the headunit.
2.Use screws to fix the brackets to the
unit.
3.Install the body chassis into the
dashboard via the 2 brackets.
4.Install the trim ring to the body
chassis.
Note:
1. Make sure the ignition is turned off,
and disconnect the cable from the
vehicle batteryʼs negative (-)
terminal.
You never want electricity running
when you install this 2-DIN car
receiver.
2. Before installation, disconnect the
wire harness and the antenna.
3. Attach the brackets on the both
sides of the car receiver with
screws as shown as the installation
drawing. Please buy from your
dealer according to the drilling of
holes size.
4. Consult with your nearest dealer if
installation requires the drilling of
holes or other modification of the
vehicle.
5. Install the car receiver in the dashboard.
6. Connect the wire harness & antenna
to the car receiver being carefully not
to pinch any wires or cables.
7. Install the plastic outer trim ring onto
the car receiver.
8. Reconnect the battery and run through
all of the options on this car recei ar
you intend to install it in. Please
choose the correct installation method
according to the actual situation of
your car. Always contact the car dealer
or manufacturer if you have any
questions.
Installation
Note: To watch video the parking wire
should be connected to brake signal.
Parking wire
Note: The parking wire is connected with
brake signal; for safety, the programs can
be seen on the monitor after braking the
car..
Connecting the reversing line to taillight on
the car
After connecting, when you start up the
reverse gear, the unit will receive the
picture from car rear view camera.
2A
Parking brake lead
Brown wire
Brake light
12V
battery
Car frame
+
-
12V
Car frame
Battery
Reverse driving light
Car frame
Pink wire
Rear view video camera lead
P
R
N
D
L
2
Gearbox
Dashboard
Bracket
Bracket

Connect the speakers according the
f o l l o w i n g d i a g r a m , i n c o r r e c t
connections will damage the unit or
your loudspeakers.
Speaker Connection
White
Green
Grey
Purple
5
3. Wiring

6
3. Wiring
Subwoofer Out
Brown
Yellow
Yellow
External MIC jack
Red
White Line Out (FL)
Video Input (V-IN)
Radio Antenna
Line Out (RL)
Line Out (RR)
Video Output 2
Front Camera
Video Output1
Audio Input (L-IN)
Audio Input (R-IN)
White
Yellow
Green
White
Red
Black BT Antenna
Red
Yellow Rear Camera input
Line Out (FR)
U1. GND (Black)
U2. Brake detect (Brown)
U3. Amplifier control
(Blue/White)
U4. FCCD (Pink/Black)
16 Pin Harness
5. FR- (Gray/Black)
6. FR+ (Gray) Front Right
Speaker
7. FL- (White/Black)
8. FL+ (White) Front Left
Speaker
13. RL- (Green/Black)
14. RL+ (Green)
16. RR- (Purple /Black)
15. RR+ (Purple) Rear Right
Speaker
Rear Left
Speaker
1. Ground (Black)
2. ACC (Red)
3. Rear Camera Control (Pink)
9. Battery + (Yellow)
10. Illumination (Orange)
12. Auto Antenna (Blue)
1. Black
4. Red
11. White
3.5mm Connector for SWC
Note: To use the steering wheel control feature,
you need an universal remote adapter (not supplied)
matched your car.
Fuse: Max 15 Ampere
Voltage: 12V(DC); Negative Ground
1 2 3 4 5 6 7 8
9 1011 12 13 14 15 16

4.Front panel Description
7
1
Front panel
7 inch TFT LCD
Mic
Built-in Microphone.
3
2
1
IR Sensor of Remote
IR remote control signal receiving
window.
9HOME button
Press to back to Main menu.
7
Rotary Control
On/Off button
Short press to switch On the
source unit.
Long press to switch Off the
source unit (When unit is working).
In operation, rotate to adjust the
sound output level.
Siri button
When Apple CarPlay or Android
Auto available, hold Siri button
to start the voice control function.
6button
8
/
[USB/SD Music] Press repeatedly to
shift track previous or next for playback.
Press and hold to active various fast rewind
or fast forward speeds for playback.
[Bluetooth Music] Press repeatedly to
shift track previous or next for playback.
5
Press to Mute or Un-Mute.
Mute Button
12
Insert an extrenal device to this port
in order to have sound output of
that external device through the unit.
AUX in jack
4
Insert micro SD for playback.
Micro SD slot
10
Press to default factory settings.
Reset button
11
Connect USB for digital playback.
Connect your iPhone for Apple
CarPlay.
Connect your Android Phone for
Android Auto.
USB port
2 3 4
5
6
7
8
9
10
11
12
Press and hold to seek downward or
upward.
[Radio] Press to select previous/
next preset radio station for
broadcasting.

5.REMOTE CONTROL
8
1.
Press and hold to power it on or off.
Short press this button mute the
volume output when unit turn on.
Long press is Power OFF function
when unit turn on.
2
1
4
5
7
10
17
14 16
15
12
13
11
9
8
6
3
/
#
1 2 3
4 5 6
7 8 9
/0
EJECT EQ
ENTER
DISC BT USB
CP/AA
SXM Radio
2. [Bluetooth ]: Press it to make a call
after inputted a phone number or
answer an incoming call.
3. [Bluetooth ]: Press it to reject a coming
call or hangup while calling
4. Press it to switch to CarPlay or Android
Auto mode; Head Unit will show string
"invalid operation" when CP/AA is not
pluged in Head Unit.
CP/AA
5. CPAA-70DM have not this function..
SXM
6. Press it to switch to RADIO mode.
Radio
7.
DISC
8. Press it to switch to Bluetooth mode.
BT
9. Press it to switch to USB mode.
USB
Press it to increase or decrease the
volume level.
10.
VOL+/-
Note: 1. SXM just for include SiriusXM
function models.
2. * # these functions
for Bluetooth.
Press it to eject the disc.
14.
EJECT
15.
/
[USB/SD]: short press it to
switch play or pause.
16.
EQ Press it to Equalizer functions .
17.
0-9 [Radio ]: Select 1-6 desired preset
station.
[USB/SD ]:Input 0-9 for
selecting track number.
#
[BT Phone ]:Input 0-9/*/# for
desired phone number.
Press it to confirm selection.
It is UP /Down/Left/Right Arrow, use
this button to select the menu item,
the title track or to show next frame.
[USB/SD]: short press it to skip to
the next track or previous functions.
Long press to activate fast forward
or fast review in a track .
11.
12.
ENTER
13.
[Bluetooth Music]: short press it to
skip to the next track or previous
functions.
[Radio] Press to seek upward/
downward.
[Radio] Press to select next/
previous preset radio station for
broadcasting.
CPAA-70DM have not this function..

6.MAIN MENU
CPAA-70DM is a 2-DIN car audio with
following functions:
Apple CarPlay, Google Android Auto,
Radio, Bluetooth, USB, SD.
The Mode icon in gray means the corre-
sponding function is not ready or proper
device have not been connected.
Touch the corresponding Mode icon to
enter playing mode.
7.Settings
9
Setup, to enter the Settings Menu.
Turn off TFT display.
TFT enter black mode touch any
zone return to TFT on.
With Android Auto
With Apple CarPlay
Main Menu
Touch the icon to enter the Setup menu.
The Setup menu is included Time Settings,
Audio Setting s, General Settings, Wallpaper
Settings.
Time Settings
The Time Settings allow the user to set Date
& Time.
Audio Settings
Below shown is the Audio Setting Menu.
Beep: set the Beep tone is ON or OFF.
Reverse Vol: adjust the Vol value is 0-30.
EQ Settings
Balance/Fader:
Touch the “ ” or “ ” of Balance /Fader to tune
for the driver and passenger preference.
The value of Balance (Left12-Right 12) and
Fader ( Front 12- Rear 12).
Touch Reset to set both Balance and Fader
to 0.
Loudness: set the Loudness is ON or OFF.

7.Settings
10
10 band of EQ tuning, slide the EQ bar to
tune each band frequency level according
to user preference.
Touch Reset to set all Band to０.
10-Band Equalizer:
General settings:
Subwoofer:
Subwoofer Output: On/Off.
Subwoofer Frequency: 50Hz/80Hz/120Hz
/160Hz
Subwoofer Level: -10~+10
Volume Control:
Set the Main / BT Talking /Navi /Voice
default volume value.
Illumination Detect: On / Off.
Brightness: Adjust the screenʼs brightness
from 0-15.
Key Led:
ON: the Led color will change automatically.
OFF: select required LED light color:
White / Red/ Yellow /Blue/Green/Purple
/Light Green.
LED Auto: On/Off.
BT: