PowerBoss 3880 User manual

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 1
DATE: JULY 10, 2003
43331313333202
333166333165833214400088
400102
400420

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 2
DATE: JULY 10, 2003
ATTACH WELD SQUEEGEE BLADE RH
(3333131) TO WELD-RETAINER RH
(3333202) USING:
3400420: NUT-HEX 5/16-24 ES
3400102: WASHER-LOCK
3400088: WASHER-FLAT
DO NOT TIGHTEN HARDWARE
MAKE SURE THAT IT CLOSES
TOGETHER PROPERLY BEFORE
PROCEEDING.

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 3
DATE: JULY 10, 2003
ATTACH BLADE-SIDE SQUEEGEE (333165) TO
WELD SQUEEGEE BLADE RH (3333131).

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 4
DATE: JULY 10, 2003
ATTACH STIFFNER-SQUEEGEE
BLADE (333166) TO WELD SQUEEGEE
BLADE RH (3333131).

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 5
DATE: JULY 10, 2003
CLOSE WELD-RETAINER RH
(3333202) OVER THE SQUEEGEE
BLADES. (MAKE SURE THE PINS
ARE CENTERED IN THE HOLES.
TIGHTEN SCREWS WITH ½ INCH
WRENCH. ATTACH KNOB-3
SIDED (833214).
833214

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 6
DATE: JULY 10, 2003
3333084
3333105
3300414
3400342
3400063
400041
333167
3333138
3333139

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 7
DATE: JULY 10, 2003 TOOLS: HAMMER
ATTACH 2EA. BUSHING-3/8 NYLON
(3333105) TO WELD-SQEEGEE ARM RH
(333084). ATTACH 1EA. BUSHING-
NYLON 3/8 TO WELD-ARM (333139)
AND 1EA. BUSHING-NYLON 3/8 TO
WELD-ARM ( 333138).

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 8
DATE: JULY 10, 2003
ATTACH 333138 AND 333139 TO 333131
AND SECURE WITH 2EA. NUT-HEX
3/8-24 (400342).

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 9
DATE: JULY 10, 2003
ATTACH WELD-SQUEEGE ARM RH
(333084) TO THE END OF 333138 &
333139 AND SECURE WITH 2EA NUTS
(400342).

MODEL: 3880
DOCUMENTED BY: POWERBOSS
PAGE NUMBER: 10
DATE: JULY 10, 2003
ATTACH SPRING-EXTENSION SIDE
SQUEEGEE (333167) TO WELD ARM (333138)
AND WELD-SQUEEGEE ARM (333084).
SECURE WITH SCR-HEX,1/4-20X0.88 ZP
(3400041) AND 2EA. NUT-FLANGE LOCK
1/4-20 ZP (3400063).
COMPLETE