PowerOak 537Wh User manual

TEMP OVERLOAD SHORT
537Wh Portable Power Station
537Wh Portable Power Station
User Manual
User Manual User Manual
SAFET Y INSTRUCTIONS
Please read this manual before use and follow its guidance. Keep this manual for future reference.
Rated powerTypical
Capacity
Battery Type Dimensions Protection LV Working Environment
Humidity
Discharge
Temperature
700W
(1400W Surge)
537Wh LiFe-P04 7.5kg/16.5lbs
(The weight may subject
to slightly change without
notice)
275*200*202mm
(10.83*7.87*7.9 inches)
IP20 10%-90%
Charging
Temperature
General Specs
-20-40
-4-104℉
℃/ 0-40
℃/
32-104℉
Net Weight
Common Loads Runtime/Charges
537Wh×DOD×η÷ (the current load power W) = available time（unit: hrs/times）
Note：DOD is the battery discharge depth，ηis the local inverter efficiency,DOD=90%,η=90%.
AC USB-C
x1
5521
x2
100-120VAC ×4（US,JP Version）
）220-240VAC ×2（EU,UK,AU Version
700W
100W
Output SpecsInput Specs
USB-A
x4
5VDC,3A
Cigarette Lighter
x1
12VDC ,10A
Certificate
Inspector:
Q C :
10Wh
Smart Phone
Around 40-50 Hrs
10Wh
LED Light Bulb
Around 20-30 Hrs
20W
Around 5-6 Hrs
75W
TelevisionElectronic Tools
Around 5-6 Hrs
80W
Refrigerator
Around 4-5 Hrs
90W
Slow Cooker
Around 2-3 Hrs
200W
P/N:17.0303.0431-00A0
Wireless Charging
Pad
12VDC,10A 5W/7.5W/10W/15W
User ManualUser Manual User ManualUser Manual
FREQUENTLY ASKED QUESTIONS
QUICK GUIDE
Dry, non-abrasive cloths to wipe will be perfect. The power station is a versatile tool for various
adventures, simple cleaning would be required from time totime tokeep the unit in a good condition.
A
How do I clean for power station?
1
Please store the power station in a dry and cool place at the recommended temperature. Do not expose
the power station to humid environment. If you want tostore it for a long time, please charge your unit
to 80% every 6 months to extend the lifespan of bettery. Remind toturn off the unit before storing.
A
How do I store my power station?
2
Please place your after-sale requirement as the warranty card written tothe platform where you order
the product.
A
How toclaim the warranty?
4
AStep1: You need tofigure out the amount of power your devices require. Some research may be taken
on internet search or the user guide of your device shall suffice.
Step 2: Check the rated power of certain port on power station. For example, if the AC output port
generates 700W of power and your device requires over 700W for a extended period of time, the
power station will turn itself off.
How do I know if my device will work with the power station?
3
LCD SCREEN GUIDE
2
AC-DC Adapter
(Charing cable included)
What`s in The Box Extra Options
a
defgh
bc
a. ECO-Mode Icon
b. Battery Capacity
c. Input Power
d. Alert Icon for low
Voltage
e. Alert Icon for Temperature
Anomaly
f. Output Power
g. Alert Icon for Overload
h. Alert Icon for Short Circuit
Screen turns off when all output turns off in 2s.
Screen turns off while on standby.
Attention:
How to operate on power station toturn ON/OFF ECO Mode\
and change the working frequency:
To Enter Settings Mode: Turn “AC” mode tothe off position.
Press “AC” and “DC” buttons at same time for 2 seconds to enter
“Settings” mode.
01
To Change Frequency Setting: Once in “Settings” mode,
press the “AC” button to switch frequency of the AC output
ports to either 50 or 60 Hz depending on your location.
02
Eco Mode: Once in “Settings” mode, press the “DC” button to
turn ON / OFF the ECO mode.
03
Exit Settings Mode: Long press the “AC” and “DC” buttons at
the same time for 2 seconds to save and exit the settings mode.
04
1
Power Station
4
Warranty Card
Warranty Card
3
User Manual
5
Car Charging Cable
(XT60-F)
7
Charging Adapter Cable
(XT60-F)
6
Solar Charging Cable
(MC4 to XT60-F)
Please observe the f ollowing instructions to ensure safet y use:
DO NOT attempt to replace the internal battery with anything other than authorized
replacement battery by yourself.
01
DO NOT operate in wet conditions, let unit dry completely before using.
02
Ensure proper ventilation while in use and do not obstruct fan openings on use. Inadequate
ventilation may cause damage tothe power station.
03
DO NOT stack anything on top of the power station in storage or in use, vibration and impact
may lead to poor connection to hardware inside.
04
DO NOT insert foreign objects into outputs or ventilation holes.
05
DO NOT place the power station near heat sources like furnace or ambient heater too close.
06
The power station generates the same potentially lethal AC power as household wall outlet,
please take carefully and keep children away from it.
07
Car
Charging Dual AC Charging
AC + PV dual
Charging
AC-DC Adapter
Charging
Solar
Charging
200W Max
12-28VDC, 8A
400W Max
Required extra
charger
400W Max
90W
25-28VAC, 10A
200W Max
196W@24V
98W@12V
Power Station
Up to 400W power of input
01
AC + PV dual recharge supported
02
AC Recharge
03
Solar Recharge
04
Connecting Cable PV+
Connecting Cable PV-
Solar Panel PV+
Solar Panel PV-
ADAPTER CHARGING PORT
US,JP Version
EU,UK Version
AU Version

FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. During the operation of device a
distance of 15 cm surrounding the device and 20 cm above the top surface of the
device must be respected.