Premier Mounts 7170-0978 Series User manual

INST-1101 v1.0
Publ. May 2022
Installation Guide
Outdoor Flat/Tilt Wall Mount
in landscape for Samsung OH75
7170-0978 Series

Page 2
Installation Guide
7170-0978 Landscape
BASIC INFORMATION
INSTALLATION ENVIRONMENT
ENCLOSED OR RECESS AREA
Wall mount model 7170-0978-00 (Flat)
7170-0978-01 (Tilt)
Display Model OH75
Installation Conguration Landscape
Tilt feature Available by model
Fixed at at, 5 deg, 10 deg , 15 deg
Environment Temperature Negative 30 Celsius to 50 Celsius, 24/7 operation
Wall application Solid concrete, Hollow Brick, or 3/4" plywood-backed wall
Product Weight 53.3 lbs [20.6kg] for at model
72.3 lbs [32.8kg] for tilt model
OA Weight (Mount & Flat-Panel) 366.4 lbs [166.2 kg] (at)
385.4 lbs [174.8 kg] (Tilt)
OA Width x Depth x Height (Landscape) 69.87” x (12.59” at to 23.066” tilt) x 41.47”
Beach Must not be placed in areas where seawater is accessible
Wind Must not be placed in areas with strong winds caused by storms or other
natural phenomenon
Snow Awning or cover is needed to avoid snow piling directly onto inlet
Iron Dust Suitable, (e.g. train or subway station)
Clearance 200mm (7.88”) minimum all around
Additional front glass Prohibited in any enclosed area

Page 3
Installation Guide
7170-0978 Landscape
CORE COMPONENTS:
HARDWARE:
Shell Expansion
Anchor
1/4-20 x 5” Pan
Head
5/16” x 3” Hex
Lag
1/4” Flat Washer1/4-20” x 3/4”
Button Head
M8 x 16mm Hex
Bolt
Lock-it
Security Barrel
5/16” Flat
Washer
5/16” Split Lock
Washer
x8
x8 x16x8
x4
x8 x1
x18
x18
TILT ADAPTER (OPTION):
1/4-20” x 2-1/2”
Button Head
1/4” Flat Washer
x12 x12
Tilt Adapter x2
Tilt Coupling
Bracket x4
Tilt Brace x2
Mounting
Frame x2
Cross
Member x1
Bridge
Member x2
Partition /
Baffle x1
Wall Support x2
Frame Brace x1
Wall Plate x1
Hooking
Bracket x2

Page 4
Installation Guide
7170-0978 Landscape
1
2
Torque:
12 to 15 kgf/cm
67 to 84 lbf/in
8 Places
M8 x 16mm
Hex Bolt
5/16” Flat
Washer
5/16” Split
Lock Washer
Frame Brace
Ba󰀪e / partition
Mounting
Frame x2
Bridge
Member x2
Cross
Member x1
1/4” Flat
Washer
1/4-20” x
3/4” BH
x10
x10

Page 5
Installation Guide
7170-0978 Landscape
Flat - Figure A
Mounts to brackets
shown in figure c.
Security
Barrel
1/4-20 x 5”
Pan Head x4
If applicable, tilt
coupling bracket
mounting hole.
Tilt - Figure B
All hardware shown are 1/4-20” x 3/4” BH screw w/ washer.
Mounts to brackets
shown in figure c.
Above
Below
10 Deg
10 Deg
5 Deg
5 Deg
15 Deg
15 Deg
Use 1/4-20” x 3/4” button head screw with washer
to secure the support bracket into the frame.
Optional
Figure C
UPUP
Install flat or tilt brackets in landscape.
1/4” Flat
Washer
1/4-20” x
3/4” BH
x4 x4
3

Page 6
Installation Guide
7170-0978 Landscape
Solid Concrete/Brick
Wood Application
Brick (Alternative)
Use a stud finder to determine the center of the wall studs in the vicinity of the mount and mark the wall.
Drywood wall must be backed with at least 3/4” plywall to support the weight of the mount and flat-panel.
Use proper mounting guideline per state code. All hardware, threaded rod, epoxy, and other mounting
hardware are not supplied. Shown for reference only.

Page 7
Installation Guide
7170-0978 Landscape
MOUNTING DIMENSIONSMOUNTING DIMENSIONS
3/4” PLYWOOD-BACKED
(OPEN)
CONCRETE/BRICK
(OPEN)
Requires a minimum of 6 mounting screws on upper slots
and 2 on bottom slots. Shell expansion anchors are suitable
for both concrete and brick.
Requires at least 6 mounting screws into wood stud and 4
mounting screws on the upper slots. Shell expansion anchors
are not used for this application.
Letter Description Portrait
ANet Height 44.66” [1134.4mm]
BTilt o󰀨set (Top) 4.59” [116.6mm]
CTilt o󰀨set (Bottom) 3.19” [81.1mm]
DBottom to mounting slot of the wall plate 20.27” [514.86mm]
EMimimum clearance of recess area 60.43” [1532.9mm]
Angle Depth
Flat 12.59” [319.8mm]
516.18” [411.0mm]
10 19.71” [500.6mm]
15 23.07” [586.0mm]
7.88” [200mm] mininum
gap for ventilation
E
Depth varies
by angle
Viewing
Height
3.91” [99.3mm]
(mounting slot)
B
C
D
A
4
5

Page 8
Installation Guide
7170-0978 Landscape
6
200mm mininum gap for
ventilation all around.
(2) 1/4-20 x 5” Pan Head
(Post-leveling Screws)
(2) 1/4-20 x 5” Pan Head
(Locking Screws)
SECURITY FEATURESECURITY FEATURE
Cable & lock Padlock
Shown: Landscape at 5 deg tilt
Support Bracket
Lock the security barrel to prevent the mount
from being tampered or disengaged.
Cover / Roof (Optional)
UP arrow