PREMIER POLYSTEEL 924-101 User manual

62 1/2"
48"
6 1/4"
30"
10"
30 5/8"
4
23
1
20 1/8"
68 1/2"
10 1/2"
X.01
924-101
4' Champion Rectangle Table, Free Standing
SHEET 1 OF 2 REV.
A
SIZE

7
6
5
Do Not Drill Out
This Hole On The
Seat/Back.
Assembly Instructions
1. Drill out holes.
2. Attach both legs to the inside of table support bar. (See view above)
3. Attach the seats to the legs.
4. Attach the straight end of each brace to the table. (See view above)
5. Attach bent end of both braces to the cross bar of each leg. (See view above)
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 642-011 Champion Table Top 4' 1
2 634-010 FS Table Stand (10" Seats) 2
3 622-011 Champion Seat/Back 4' 2
4 634-011 4ft Free Standing Table Brace 2
5 516-058 3/8"x1-1/2" SS Hex Bolt 16
6 516-023 3/8" SS Flat Washer 32
7 516-028 3/8" SS Nylock Nut 16
X.01
924-101
4' Champion Rectangle Table, Free Standing
SHEET 2 OF 2 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
642-013 Champion Table Top 6’ 1
622-013 Champion Seat/Back 6’ 2
634-010 Stands
(free standing)
2
634-013A Brace
(6’ free standing w/umbrella)
2
516-058 3/8” x 1-1/2” SS Hex Bolt 16
516-028 3/8” SS Nylock Nut 16
516-023 3/8” SS Washer 32
924-301
Assembly Instructions
1. Drill out holes.
2. Attach both stands to the inside of table support bar. (See photo above)
3. Attach the seats to the stands.
4. Attach the straight end of each brace to the table. (See photo above)
5. Attach bent end of both braces to the cross bar of each stand. (See photo above)
Periodic check of bolt tightness recommended.
• Attach both stands to the inside of table support bar
• Attach the straight end of each brace to the table.
• Attach bent end of both braces to the cross bar of each stand.
642-013 Top
622-013 Seat
634-010 Stand
634-013A Brace
In Accordance to California law:
WARNING This product contains a
chemical know to the State of
California to cause cancer and birth
defects or other reproductive harm.

Part No. Description Qty.
642-015 Champion Table Top 8’ 1
622-015 Champion Seat/Back 2
634-010 Stands
(free standing)
2
634-013A Brace
(8’ free standing w/umbrella)
2
516-058 3/8” x 1-1/2” SS Hex Bolt 16
516-028 3/8” SS Nylock Nut 16
516-023 3/8” SS Washer 32
924-501
Assembly Instructions
1. Drill out holes.
2. Attach both legs to the inside of table support bar. (See photo above)
3. Attach the seats to the legs.
4. Attach the straight end of each brace to the table. (See photo above)
5. Attach bent end of both braces to the cross bar of each leg. (See photo above)
Periodic check of bolt tightness recommended.
30
20
96
641
2681
2
• Attach both stands to the inside of table support bar
• Attach the straight end of each brace to the table.
• Attach bent end of both braces to the cross bar of each stand.
642-013 Top
622-013 Seat
634-010 Stand
634-013A Brace
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

924-601
Part
No.
Description Qty.
642-L16 10’ Champion Table Top 1
622-016 10’ Champion Seat/Back 2
634-010 Free Standing Table Stand 3
634-013A Table Brace w/Umbrella Hole 4
516-059 3/8” X 2-1/2” SS Hex Bolt 1
516-058 3/8” X 1-1/2” SS Hex Bolt 24
516-028 3/8” SS Nylock Nut 25
516-023 3/8” SS Flat Washer 50
642-L16
622-016
634-010
634-013A
1 Start with the Table Top upside down. It works best to put the whole table together
loosely upside down and then flip it over and tighten up the bolts with the table on a
level surface.
2 Drill out holes on the Table Top, Seats, Stands and Braces with a 7/16” dia. drill bit.
3 Attach the Stands to the Table Top loosely using the 3/8” x 1-1/2” SS Bolts.
4 Attach the Seats to the Stands loosely using the 3/8” x 1-1/2” SS Bolts.
5 Attach Braces to the Stands and Table Top loosely using the 3/8” x 1-1/2” SS Bolts. The
center stand uses a 3/8” x 2-1/2” SS bolt where the two braces connect to the stand. (See
back side for details.)
6 Turn the table right side up on a level surface and tighten all bolts.
Periodic check of bolt tightness recommended.
Northwoods Style Pictured
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.