PREMIER POLYSTEEL 939-D11 User manual

Part No. Description Qty.
625-009 Deck Chair, Laser 1
639-001 Deck Chair Stand 2
639-002 Deck Chair Brace 1
516-049 3/8” X 2-1/2” SS Button Socket
Cap
4
516-028 3/8” SS Nylock Nuts 6
516-023 3/8” SS Flat Washers 6
939-D11
1Drill plastic out of the mounting holes on the seat, stands and brace using a 7/16” dia. drill bit.
2Fasten the seat to the stands and attach brace to the stands loosely.
3Tighten bolts on brace.
4Tip chair to upright position, tighten bolts evenly so chair does not lean to one side or the other.
Periodic check of bolt tightness recommended.
In Accordance to California law: WARNING This product contains a chemical know to the State of California to cause cancer
and birth defects or other reproductive harm.

Part No. Description Qty.
623-006 Patio Chair 1
639-001 Patio Chair Stand 2
639-002 Patio Chair Brace 1
516-032 3/8” X 3-1/2” SS Button Socket
Cap
4
516-028 3/8” SS Nylock Nuts 6
516-023 3/8” SS Flat Washers 6
939-D21
1Drill plastic out of the mounting holes on the seat, stands and brace using a 7/16” dia. drill bit.
2Fasten the seat to the stands and attach brace to the stands.
3Tighten all of the bolts.
Periodic check of bolt tightness recommended.
1Drill plastic out of the mounting holes on the seat, stands and brace using a 7/16” dia. drill bit.
2Fasten the seat to the stands and attach brace to the stands loosely.
3Tighten bolts on brace.
4Tip chair to upright position, tighten bolts evenly so chair does not lean to one side or the other.
In Accordance to California law: WARNING This product contains a chemical know to the State of California to cause cancer
and birth defects or other reproductive harm.

Part No. Description Qty.
623-007 Patio Chair 1
639-001 Patio Chair Stand 2
639-002 Patio Chair Brace 1
516-032 3/8” X 3-1/2” SS Button Socket
Cap
4
516-028 3/8” SS Nylock Nuts 6
516-023 3/8” SS Flat Washers 6
939-D31
1Drill plastic out of the mounting holes on the seat, stands and brace using a 7/16” dia. drill bit.
2Fasten the seat to the stands and attach brace to the stands.
3Tighten all of the bolts.
Periodic check of bolt tightness recommended.
1Drill plastic out of the mounting holes on the seat, stands and brace using a 7/16” dia. drill bit.
2Fasten the seat to the stands and attach brace to the stands loosely.
3Tighten bolts on brace.
4Tip chair to upright position, tighten bolts evenly so chair does not lean to one side or the other.
In Accordance to California law: WARNING This product contains a chemical know to the State of California to cause cancer
and birth defects or other reproductive harm.