PREMIER POLYSTEEL 935-101 User manual

935-101 4FT CHAMPION
FREE STANDING
BENCH WITHOUT BACK
17
16
48
10
Seat
Braces
Stands
Part No. Description Qty.
622-011 4’ Champion seat/back 1
631-010 Stand (Free Standing) 2
631-313 Brace (WO/Back) 2
516-058 3/8” x 1-1/2” SS Hex Bolt 6
516-054 3/8” x 2” SS Hex Bolt 1
516-028 3/8” SS Nylock Nut 7
516-023 3/8” SS Washer 14
935-101
1 Drill plastic out of the mounting holes on the stands, seat and braces using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the braces to the stands. The braces share the
3/8” X 2” Hex Bolt where they connect to the center of the seat.
3 Make sure that the bench sits level and the legs are straight, then tighten all of the bolts.
Periodic check of bolt tightness recommended.
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

48"
10"
32 9/16"
8" 8"
25"
18"
Concrete
Ground level
1
3
4
2
5
Drill plastic out of the mounting holes on the 1.
stands and the seat using a 7/16” dia. drill bit.
Attach seat to stands with 3/8” x 1-1/2” SS 2.
hex bolts, washers and nuts.
Secure in concrete footing as shown. 3.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-011 Champion Seat/Back 4' 1
2 631-020 Bench without Back Stand, Direct Bury 2
3 516-058 3/8"x1-1/2" SS Hex Bolt 4
4 516-023 3/8" SS Flat Washer 8
5 516-028 3/8" SS Nylock Nut 4
X.01
935-102
4' Champion Bench without back, Direct Bury
SHEET 1 OF 1 REV.
A
SIZE
In Accordance to California law: WARNING This
product contains a chemical know to the State
of California to cause cancer and birth
defects or other reproductive harm.

48"
10"
13 1/4"
34 11/16"
2
1
13 1/4"
3
4
5
1
2
Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia. drill bit. 1.
Fasten the seat to the stands. 2.
Anchor to the wall with the appropriate fasteners. 3.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-011 Champion Seat/Back 4' 1
2 634-001 Wall Mount Bracket 2
3 516-058 3/8"x1-1/2" SS Hex Bolt 4
4 516-023 3/8" SS Flat Washer 8
5 516-028 3/8" SS Nylock Nut 4
X.01
935-104
4' Champion Bench, Wall Mount
SHEET 1 OF 1 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-013 6’ Champion seat/back 1
631-010 Stand
(Free Standing)
2
631-313 Brace (WO/Back) 2
516-058 3/8” x 1-1/2” SS Hex Bolt 8
516-028 3/8” SS Nylock Nut 8
516-023 3/8” SS Washer 16
935-301
1 Drill plastic out of the mounting holes on the stands, seat and braces using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the braces to the stands and seat.
3 Make sure bench is level and tighten all of the bolts.
Periodic check of bolt tightness recommended.
935-301 6FT CHAMPION
FREE STANDING
BENCH WITHOUT BACK
17
72
16
10
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

72"
10"
49 1/16"
8" 8"
25"
18"
Concrete
Ground level
Drill plastic out of the mounting holes on the 1.
stands and the seat using a 7/16” dia. drill bit.
Attach seat to stands with 3/8” x 1-1/2” SS 2.
hex bolts, washers and nuts.
Secure in concrete footing as shown. 3.
X.01
935-302
6' Champion Bench without back, Direct Bury
SHEET 1 OF 2 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

1
2
5
3
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-013 Champion Seat/Back 6' 1
2 631-020 Bench without Back Stand, Direct Bury 2
3 516-058 3/8"x1-1/2" SS Hex Bolt 4
4 516-023 3/8" SS Flat Washer 8
5 516-028 3/8" SS Nylock Nut 4
X.01
935-302
6' Champion Bench without back, Direct Bury
SHEET 2 OF 2 REV.
A
SIZE

72"
10"
13 1/4"
51 3/16"
2
1
13 1/4"
A
3
4
5
1
2
DETAIL A
SCALE 1 : 8
4
5
3
Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia. drill bit. 1.
Fasten the seat to the stands. 2.
Anchor to the wall with the appropriate fasteners. 3.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-013 Champion Seat/Back 6' 1
2 634-001 Wall Mount Bracket 2
3 516-058 3/8"x1-1/2" SS Hex Bolt 4
4 516-023 3/8" SS Flat Washer 8
5 516-028 3/8" SS Nylock Nut 4
X.01
935-304
6' Champion Bench, Wall Mount
SHEET 1 OF 1 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of California
to cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-013 Champion Seat/Back 6’ 1
633-011 Stand (Surface Mount) 2
516-058 3/8” x 1-1/2” SS Hex Bolt 4
516-028 3/8” SS Nylock Nut 4
516-023 3/8” SS Washer 8
935-307
1Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia.
drill bit.
2Fasten the seat to the stands.
3Anchor to concrete with six 1/2” x 3-1/2” anchor bolts.
Periodic check of bolt tightness recommended.
935-307 6FT CHAMPION
SURFACE MOUNT
BENCH WITHOUT BACK
10
18
72
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-015 8’ Champion seat/back 1
631-010 Stand (WO/Back)
(Free Standing)
2
631-313 Brace (WO/Back) 2
516-058 3/8” x 1-1/2” SS Hex Bolt 8
516-028 3/8” SS Nylock Nut 8
516-023 3/8” SS Washer 16
935-501
1 Drill plastic out of the mounting holes on the stands, seat and brace using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the brace to the stands.
3 Make sure the bench is level and tighten all of the bolts.
Periodic check of bolt tightness recommended.
96
935-501 8' CHAMPION
FREE STANDING
BENCH WITHOUT BACK
17
16
10
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

96"
10"
60 9/16"
8" 8"
25"
18"
Concrete
Ground level
Drill plastic out of the mounting holes on the 1.
stands and the seat using a 7/16” dia. drill bit.
Attach seat to stands with 3/8” x 1-1/2” SS 2.
hex bolts, washers and nuts.
Secure in concrete footing as shown. 3.
X.01
935-502
8' Champion Bench without back, Direct Bury
SHEET 1 OF 2 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

1
2
5
3
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-015 8' Champion Seat/Back 1
2 631-020 Bench without Back Stand, Direct Bury 2
3 516-058 3/8"x1-1/2" SS Hex Bolt 4
4 516-023 3/8" SS Flat Washer 8
5 516-028 3/8" SS Nylock Nut 4
X.01
935-502
8' Champion Bench without back, Direct Bury
SHEET 2 OF 2 REV.
A
SIZE

96"
10"
13 1/4"
62 11/16"
2
1
13 1/4"
A
3
4
5
1
2
DETAIL A
SCALE 1 : 8
4
5
3
Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia. drill bit. 1.
Fasten the seat to the stands. 2.
Anchor to the wall with the appropriate fasteners. 3.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-015 8' Champion Seat/Back 1
2 634-001 Wall Mount Bracket 2
3 516-058 3/8"x1-1/2" SS Hex Bolt 4
4 516-023 3/8" SS Flat Washer 8
5 516-028 3/8" SS Nylock Nut 4
X.01
935-504
8' Champion Bench, Wall Mount
SHEET 1 OF 1 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-015 Champion Seat/Back 8’ 1
633-011 Stand (Surface Mount) 2
516-058 3/8” x 1-1/2” SS Hex Bolt 8
516-028 3/8” SS Nylock Nut 8
516-023 3/8” SS Washer 16
935-507
1 Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia.
drill bit.
2 Fasten the seat to the stands.
3 Anchor to concrete with six 1/2” x 3-1/2” anchor bolts.
Periodic check of bolt tightness recommended.
96
17
935-507 8' CHAMPION
SURFACE MOUNT
BENCH WITHOUT BACK
10
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-016 10’ Champion seat/back 1
631-010 Stand (WO/Back)
(Free Standing)
3
631-313 Brace (WO/Back) 3
516-058 3/8” x 1-1/2” SS Hex Bolt 12
516-028 3/8” SS Nylock Nut 12
516-023 3/8” SS Washer 24
935-601
1 Drill plastic out of the mounting holes on the stands, seat and braces using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the brace to the stands.
3 Make sure the bench is level and tighten all of the bolts.
Periodic check of bolt tightness recommended.
16
10
935-601 10ft CHAMPION
FREE STANDING
BENCH WITHOUT BACK
120
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

120"
10"
97 1/16"
50 1/8"
8" 8"
25"
18"
8"
Concrete
Ground level
Drill plastic out of the mounting holes on the 1.
stands and the seat using a 7/16” dia. drill bit.
Attach seat to stands with 3/8” x 1-1/2” SS 2.
hex bolts, washers and nuts.
Secure in concrete footing as shown. 3.
X.01
935-602
10' Champion Bench without back, Direct Bury
SHEET 1 OF 2 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

1
2
5
3
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-016 10' Champion Bench/Back 1
2 631-020 Bench without Back Stand, Direct Bury 3
3 516-058 3/8"x1-1/2" SS Hex Bolt 6
4 516-023 3/8" SS Flat Washer 12
5 516-028 3/8" SS Nylock Nut 6
X.01
935-602
10' Champion Bench without back, Direct Bury
SHEET 2 OF 2 REV.
A
SIZE

120"
10"
13 1/4"
99 3/16"
49 1/16"
2
1
13 1/4"
A
3
4
5
1
2
DETAIL A
SCALE 1 : 8
4
5
3
Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia. drill bit. 1.
Fasten the seat to the stands. 2.
Anchor to the wall with the appropriate fasteners. 3.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-016 10' Champion Bench/Back 1
2 634-001 Wall Mount Bracket 3
3 516-058 3/8"x1-1/2" SS Hex Bolt 6
4 516-023 3/8" SS Flat Washer 12
5 516-028 3/8" SS Nylock Nut 6
X.01
935-604
10' Champion Bench, Wall Mount
SHEET 1 OF 1 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

180"
10"
157 1/16"
50 1/16" 50 1/16"
18"
8"
25"
Drill plastic out of the mounting holes on the stands and the seats using a 7/16” dia. drill bit. 1.
Attach seats together with 3/8” x 1-1/2” SS hex bolts, washers and nuts and then mount stands to 2.
the seats with 3/8” x 1-1/2” SS hex bolts, washers and nuts.
Drill 4 holes (8”-10”Dia.) into the ground matching the spacing of the legs on the bench. 3.
Support the bench in the holes with wood stakes. 4.
Check the level and straightness of the bench and then fill the holes with concrete to within 2” of 5.
ground surface.
X.01
935-702
15' Champion Bench without back, Direct Bury
SHEET 1 OF 2 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

2
1
5
3
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 622-018 7.5' Champion Seat/Back 2
2 631-020 Bench without Back Stand, Direct Bury 4
3 516-058 3/8"x1-1/2" SS Hex Bolt 10
4 516-023 3/8" SS Flat Washer 20
5 516-028 3/8" SS Nylock Nut 10
X.01
935-702
15' Champion Bench without back, Direct Bury
SHEET 2 OF 2 REV.
A
SIZE

Part No. Description Qty.
622-018 7.5’ Champion Seat/Back 2
633-011 Stand
(Surface Mount)
4
516-058 3/8” x 1-1/2” SS Hex Bolt 10
516-028 3/8” SS Nylock Nut 10
516-023 3/8” SS Washer 20
935-707
1 Drill plastic out of the mounting holes on the stands and the seats using a 7/16”
dia. drill bit.
2 Attach seats together with 3/8” x 1-1/2” SS hex bolts, washers and nuts and then
mount stands to the seats with 3/8” x 1-1/2” SS hex bolts, washers and nuts.
3 Place bench in desired location and secure to floor with the appropriate fasteners.
Periodic check of bolt tightness recommended.
935-707 15FT CHAMPION
SURFACE MOUNT
BENCH WITHOUT BACK
18
10
180
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.