Seville Classics WEB619 User manual

5-Tier Freestanding Garment Rack Closet Organizer
Model: WEB619
Thank you for choosing Seville Classics! We hope that you enjoy your new
closet organizer. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and contact informaon.
092019

Parts List
A. Top frame (3)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Base frame (3)
C. Top shelf (1)
D. Base shelf (1)
E. Middle shelf (3)
F. Hanger (1)
G. X-Brace (1)
H. Feet (6)
I. Hex screw (12)
J. 30 mm bolt (14)
K. 28 mm bolt (4)
L. 45 mm bolt (6)
M. Nut (10)
N. Bracket (1)
O. Short screw (1)
P. Anchor (1)
Q. Long screw (1)
R. Hex key (1)
S. Wrench (1)

2
STEP 1.
Press FEET (H) into booms of
BASE FRAMES (B).
Connect FRAMES (A, B) with
45 mm BOLTS (L) into
NUTS (M) using HEX KEY (R).
Hold NUTS (M) with
WRENCH (S) to ghten.
Repeat for all FRAMES (A, B).
STEP 2.
Install MIDDLE SHELVES (E)
with HEX SCREWS (I) using
HEX KEY (R) to frame.
STEP 3.
Connect the remaining frame
with HANGER (F) using 30 mm
BOLTS (J) and HEX KEY (R).
Connect X-BRACE (G) to frames
with 28 mm BOLTS (K) into
NUTS (M) using HEX KEY (R).
Hold NUTS (M) with
WRENCH (S) to ghten.
Assembly Instrucons

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]m
Homepage: www.SevilleClassics.com
092019
STEP 4.
Aach TOP SHELF (C) with 30 mm
BOLTS (J) and HEX KEY (R).
Aach BRACKET (N) to boom of TOP
SHELF (C) with SHORT SCREW (O).
Aach BASE (D) to boom of frame
with 30 mm BOLTS (J) and HEX KEY (R).
Move unit into posion.
Wall Mount Instrucons
Mark the wall through the
BRACKET (N) with a pencil.
Drill a pilot hole with a 5 mm bit.
Press ANCHOR (P) into hole.
Secure with LONG SCREW (Q) into
ANCHOR (P).