PREMIER POLYSTEEL 937-301 User manual

Part No. Description Qty.
622-113 6’ Supreme Champion seat/back 1
631-110 Supreme Stand
(Free Standing)
2
631-313 Brace (WO/Back) 2
516-058 3/8” x 1-1/2” SS Hex Bolt 8
516-028 3/8” SS Nylock Nut 8
516-023 3/8” SS Washer 16
937-301
1 Drill plastic out of the mounting holes on the stands, seat and braces using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the braces to the stands and seat.
3 Make sure bench is level and tighten all of the bolts.
Periodic check of bolt tightness recommended.
937-301 6FT
SUPREME CHAMPION
FREE STANDING
BENCH WITHOUT BACK
17
72 15
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-113 6’ Supreme Champion seat/back 1
631-120 Supreme Stand
(Direct Bury)
2
516-058 3/8” x 1-1/2” SS Hex Bolt 4
516-028 3/8” SS Nylock Nut 4
516-023 3/8” SS Washer 8
937-302
1 Drill plastic out of the mounting holes on the stands, seat and braces using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the braces to the stands and seat.
3 Make sure bench is level and tighten all of the bolts.
Periodic check of bolt tightness recommended.
15
72
17
937-302 6FT
SUPREME CHAMPION
DIRECT BURY
BENCH WITHOUT BACK
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-113 6’ Supreme Champion seat/back 1
633-111 Supreme Stand wo/Back
(Surface mount)
2
516-058 3/8” x 1-1/2” SS Hex Bolt 4
516-028 3/8” SS Nylock Nut 4
516-023 3/8” SS Washer 8
937-305
1 Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the braces to the stands and seat.
3 Make sure bench is level and tighten all of the bolts.
4 Fasten to the floor with the appropriate fasteners.
Periodic check of bolt tightness recommended.
937-305 6FT
SUPREME CHAMPION
SURFACE MOUNT
BENCH WITHOUT BACK
17
72 15
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-113 6’ Supreme Champion seat/back 1
633-111 Supreme Stand wo/Back
(Surface mount)
2
516-058 3/8” x 1-1/2” SS Hex Bolt 4
516-028 3/8” SS Nylock Nut 4
516-023 3/8” SS Washer 8
937-307
1 Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the braces to the stands and seat.
3 Make sure bench is level and tighten all of the bolts.
4 Fasten to the floor with the appropriate fasteners.
Periodic check of bolt tightness recommended.
15
72
17
937-307 6FT
SUPREME CHAMPION
SURFACE MOUNT
BENCH WITHOUT BACK
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-115 8’ Supreme Champion seat/back 1
631-110 Supreme Stand (WO/Back)
(Free Standing)
2
631-313 Brace (WO/Back) 2
516-058 3/8” x 1-1/2” SS Hex Bolt 8
516-028 3/8” SS Nylock Nut 8
516-023 3/8” SS Washer 16
937-501
1 Drill plastic out of the mounting holes on the stands, seat and brace using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the brace to the stands.
3 Make sure the bench is level and tighten all of the bolts.
Periodic check of bolt tightness recommended.
96
937-501 8ft
SUPREME CHAMPION
FREE STANDING
BENCH WITHOUT BACK
17
15
16
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-115 8’ Supreme Champion seat/back 1
631-120 Supreme Stand (WO/Back)
(Direct Bury)
2
516-058 3/8” x 1-1/2” SS Hex Bolt 4
516-028 3/8” SS Nylock Nut 4
516-023 3/8” SS Washer 8
937-502
1 Drill plastic out of the mounting holes on the stands and the seat using a 7/16”
dia. drill bit.
2 Attach seat to stands with 3/8” x 1-1/2” SS hex bolts, washers and nuts.
3 Secure in concrete footing as shown.
Periodic check of bolt tightness recommended.
30
647
8
15
18
937-502 8ft
SUPREME CHAMPION
DIRECT BURY
BENCH WITHOUT BACK
96
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-115 8’ Supreme Champion seat/back 1
633-111 Supreme Stand wo/Back
(Surface mount)
2
516-058 3/8” x 1-1/2” SS Hex Bolt 4
516-028 3/8” SS Nylock Nut 4
516-023 3/8” SS Washer 8
937-507
1Drill plastic out of the mounting holes on the stands and seat using a 7/16” dia. drill bit.
2Fasten the seat to the stands loosely and then fasten the braces to the stands and seat.
3Make sure bench is level and tighten all of the bolts.
4Fasten to the floor with the appropriate fasteners.
Periodic check of bolt tightness recommended.
937-507
8’ Champion Supreme bench
without back, Surface Mount
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-116 10’ Supreme Champion seat/back 1
631-110 Supreme Stand (WO/Back)
(Free Standing)
3
631-313 Brace (WO/Back) 3
516-058 3/8” x 1-1/2” SS Hex Bolt 12
516-028 3/8” SS Nylock Nut 12
516-023 3/8” SS Washer 24
937-601
1 Drill plastic out of the mounting holes on the stands, seat and braces using a 7/16” dia. drill bit.
2 Fasten the seat to the stands loosely and then fasten the brace to the stands.
3 Make sure the bench is level and tighten all of the bolts.
Periodic check of bolt tightness recommended.
120
937-601 10ft
SUPREME CHAMPION
FREE STANDING
BENCH WITHOUT BACK
15
16
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
622-118 7.5’ Champion Seat/Back 2
631-020 Stand
(Direct Bury)
4
516-058 3/8” x 1-1/2” SS Hex Bolt 10
516-028 3/8” SS Nylock Nut 10
516-023 3/8” SS Washer 20
937-702
1 Drill plastic out of the mounting holes on the stands and the seats using a 7/16”
dia. drill bit.
2 Attach seats together with 3/8” x 1-1/2” SS hex bolts, washers and nuts and then
mount stands to the seats with 3/8” x 1-1/2” SS hex bolts, washers and nuts.
3 Drill 4 holes (8”-10”Dia.) into the ground matching the spacing of the legs on
the bench.
4 Support the bench in the holes with wood stakes.
5 Check the level and straightness of the bench and then fill the holes with con-
crete to within 2” of ground surface.
Periodic check of bolt tightness recommended.
In Accordance to California law: WARNING This product contains a chemical know to the State of California to
cause cancer and birth defects or other reproductive harm.