Premier Technology High Fidelity Series Instruction manual

General Description:
The High Fidelity 3100 has crystal clear
quality with a improved digitizing method
of µlaw, unlike any other in the industry.
Messages are recorded from the built in
tape player and stored on digital
memory. Storing messages digitally
limits mechanical breakdowns you would
have with other analog equipment.
Features:
■High Fidelity –
The unit stores audio in
µlaw format which has an
equivalent bit rate of 112
kbps.
■Tone Control –
The new tone control gives
you a broader range of
sound, thus allowing the
bass and treble to maximize
the 3100’s fidelity.
■Tape Mechanism –
To guarantee a perfect
download, our system
uses the highest quality
tape drive in the industry.
The drive is built to
accompany high end stereo
equipment, not the lower
quality tape drives found in
answering machines. The
unit loads your customized
on hold program on speed
every time.
■Verbal Prompting –
Our unit is easy to operate.
Ahuman voice leads you
through installation of the
production.
■Zero Gap –
There is no silence between
the end of the program and
the beginning.
■Flash Memory –
A technological
breakthrough gives the
3100 the memory of the
future. The nonvolatile
memory assures the
recording will never be lost
due to loss of power.
■Compatibility –
The 3100 is compatible with
any telephone system that
has a music-on-hold
interface.
P.O. Box 159 • One Premier Drive Long Lake, Minnesota • 800.466.8642 • [email protected]
T E C H N L O G I E S

FCC Information
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against interference when the
equipment is operated in a commercial environment.
The user is cautioned that changes or modifications that are
not expressly approved by Premier Technologies, Inc. could
void the user’s authority to operate the equipment.
Installation:
1. Plug the small-connector end of the AC adapter into the 12 VDC Input jack at the side of the unit. Plug the
larger, power supply end of the adapter into a grounded AC power outlet. The AC outlet should be one that
remains on at all times.
2. Connect a cable (provided) from the music on hold input of the telephone system to the 600 or 8 Ohm Output
jack of the unit. One RCA end always goes to the 3100 series.
3. To download production, press the EJECT button on face of the 3100 to open cassette door. A built-in voice
recording will guide you through loading of production.
Authorized Dealer
PN 199-3101 Rev 8/2002
Warranty
Upon receipt, the manufacturer will repair or replace,
at its option, for a period of three years from the date
of purchase, any system that proves defective in
materials or workmanship. The manufacturer is not
liable for indirect, incidental, or consequential
damages in connection with the use of this product.
This limited warranty does not include labor for
installation or removal of the unit.
Technical Specifications
Dimensions: H x W x D = 5.25” x 8.5” x 5”
Weight: 6 lbs. (boxed)
Sampling Rate: 112 kbps
Recording Times: 4, 8, 12, 16, 32, 48 minutes
Frequency Response: 200 Hz to 3400 Hz + or -1dB (full
spectrum of telephone transmission)
Power Source: 12V AC adapter, included.
Audio Output: 600 Ohm & 8 Ohm (Note: 8 Ohm
output has a 5 watt amplifier.)
Tone Control: Controls the tone on the 8 Ohm and
600 Ohm outputs.
Verbal Prompting: Assists with loading of the production.