Premio RCO-3000 Series User manual

USER’S
MANUAL
RCO-3000 Series
Advanced Fanless Embedded System

RCO-3000 | User’s Manual
Table of Contents
Prefaces …………………………………………………….……………………………………………. 04
Revision …………………………………………………………………………………………..……………….……….. 04
Disclaimer ………………………………………………………..…….…….………………………….……………….. 04
Copyright Notice …………………………………….…………………….…………………………………………… 04
Trademarks Acknowledgment …………..………………………………………………………...................04
Environmental Protection Announcement …………………………….………………….……………….. 04
Safety Precautions ………………………………………….……………………………….…………….………….. 05
Technical Support and Assistance …………………………………….…………….…………….…………….06
Conventions Used in this Manual ………………………………………………………………….….………..06
Package Contents …………………………………………………………………………………………….…………07
Ordering Information …………………………………….……………………………………….……….………… 07
Optional Accessory …………...……………………………………..................................................... 08
Chapter 1 Product Introductions ………………………………………………………..… 09
1.1 Overview ……………………….………………………………..………….…………………………..10
1.1.1 Key Feature ………….……………………………………….……….…..…………….......10
1.2 Hardware Specification ….………………………….....…………….…………..………………11
1.3 System I/O ……………………………..……………………..…………………………………………12
1.3.1 RCO-3000 ………………….…………......................……………………………………12
1.3.2 RCO-3000-4L(P) …………………………………….…….……………….………………...14
1.3.3 RCO-3000-4L(P)-M12 ……..…………………….…….……………….………………... 16
1.3.4 RCO-3011E(P) ………………..…………………….…….……………….………………... 18
1.3.5 RCO-3011E-4L(P) / RCO-3011P-4L(P) ………….……………….………………... 20
1.3.6 RCO-3011E-4L(P)-M12 / RCO-3011P-4L(P)-M12 ………….………………... 22
1.3.7 RCO-3022EE(PP) ………….………………………………………..…….………………... 24
1.3.8 RCO-3022EE-4L(P) / RCO-3022PP-4L(P) ………….……………………………... 26
1.3.9 RCO-3022EE-4L(P)-M12 / RCO-3022PP-4L(P)-M12 ………………………... 28
1.4 Mechanical Dimension …………………………..…………………………..………….………. 30
1.4.1 RCO-3000 / RCO-3000-4L(P) / RCO-3000-4L(P)-M12 ..………………….… 30
1.4.2 RCO-3011E(P) / RCO-3011E(P)-4L(P) / RCO-3011E(P)-4L(P)-M12 …... 31
1.4.3 RCO-3022EE(PP) / RCO-3022EE(PP)-4L(P) /
RCO-3022EE(PP)-4L(P)-M12 …………………………………………………………... 32
Chapter 2 Jumpers and Connectors ………………………………………………………. 33
2.1 Switch and connector Locations ………………………………………..…….……………....34
2.1.1 Top View ………………………………………………………………………..……………… 34
2.1.2 Bottom View ………………………………………………………………………..………..35
2.2 Connector / Switch Definition ……………………………….……….…….……….............36
2.3 Switch Definitions ………….……………...............................................................37
2.4 Connector Definitions ………………………….......................................................37
Chapter 3 System Setup …………………………..…………………………………………… 48
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing …………………………………………………………………………………………….. 49
3.2 Removing chassis bottom cover ……...……………..……………………..………..……... 49
3.3 Removing PCIe/PCI expansion module ……….….…………………….……………….… 50
3.4 Removing chassis top cover ……………………………..………………….….................. 51
3.5 Installing SODIMM ……………………………………………….…………………….…………....52
3.6 Installing Mini PCIe card / mSATA …….…………………….……..….……………….……..53
3.7 Installing antenna ………………..……………………………………………………..…………... 54
2

RCO-3000 | User’s Manual
3
3.8 Assemble chassis top cover …..……………………………………………………...............56
3.9 Installing HDD on internal SATA HDD bay……………..…………………..………..….... 58
3.10 Installing HDD on removable SATA HDD bay…..…………………….……............... 60
3.11 Installing PCIe/PCI expansion card ……………..…………..………..…………..……...... 63
3.12 Assemble PCIe/PCI expansion module …………………….……………..………….…....64
3.13 Assemble chassis bottom cover …….…...…..….………………………………………….. 65
3.14 Installing SIM card …….…………..….……………..….………………………………………….. 66
3.15 Installing wall mount kit …….…………..….…..…...…………………………………………..67
3.16 Installing DIN rail holder …….…………..….…..…...…………………………………………..68
Chapter 4 BIOS Setup …………………………………………………………………………… 69
4.1 BIOS Introduction …….……….……………………………………..….…….…..….…………...70
4.2 Main Setup ……..……….………………….…………………………..…….….………………......71
4.2.1 System Language …….……………………………………..……..…………………….... 71
4.2.2 System Date …….……………………………………………..……..……………………....71
4.2.3 System Time ………..…………………………………………..……….…………………... 71
4.3 Advanced Setup ………………………………………………………..…………………………….. 72
4.3.1 CPU Configuration …………………………………………….…………..………………. 72
4.3.2 ACPI Settings …………………………….………..………………………………….……... 73
4.3.3 AMT Configuration ………..……………………………….………………………..….... 74
4.3.4 Super IO Configuration ……………..………………………………....……..…….....75
4.3.5 Hardware Monitor ……………………………….…………….………….….…….….... 78
4.3.6 Serial Port Console Redirection .…………………………..…………..………..... 78
4.3.7 SATA Configuration ……..………………………………..………………………….......79
4.3.8 Network Stack Configuration ……….…………………………………..………….... 80
4.3.9 CSM Configuration ………………………………………………..………………………. 81
4.3.10 USB Configuration …………………………………………………………………..……..82
4.3.11 Intel(R) Ethernet Connection I218-LM-XX:XX:XX:XX:XX:XX ……..…….. 83
4.3.12 Intel(R) I210 Gigabit Network Connection- XX:XX:XX:XX:XX:XX …….. 84
4.4 Chipset …………...……….………………….…..….…..………………………………………..…....85
4.4.1 System Agent (SA) Configuration ………………………………..…………………..85
4.4.2 PCI-IO Configuration ………………………………………………..…………………….. 87
4.5 Security …………...……….………………….…..….…..………………………………..…………...90
4.5.1 Administrators Password …….…………………………………..…………………….. 90
4.5.2 Users Password …….……………………………….………………..…………………….. 90
4.6 Boot …………...……….….………………….…..…………………………..…………..……………...91
4.6.1 Setup Prompt Timeout ………………………..…………..……………………………..91
4.6.2 Bootup NumLock State ………………………………………………..………………… 91
4.6.3 Full Screen Logo Show ………………………….…………………………..…...……… 91
4.6.4 Fast Boot ……………………………….……………..………………………..……………... 91
4.6.5 Hard Driver BBS Priorities ……………………..………………………..……………...91
4.7 Save & Exit …...……….….………………….…..….…..……………………………..…………..... 92
4.7.1 Save Changes and Reset ……………..………………………………..……..……......92
4.7.2 Discard Changes and Reset …………………………………............……………….92
4.7.3 Restore Defaults ……………………………………………………………..……………...92
4.7.4 Launch EFI Shell from filesystems device ………………………………..……… 92
Appendix WDT & GPIO …………………………………………………………………………… 93
WDT Sample Code …….……………………….……………….……………..….…….…….…………... 94
GPIO Sample Code ………………………………………………………..…………………………………. 95

RCO-3000 | User’s Manual
4
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. Premio
Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The
information in this document is subject to change without notice and does not represent a commitment
on the part of Premio Inc.
Premio Inc. disclaims all warranties, express or implied, including, without limitation, those of
merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must
take full responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
without the prior written permission of Premio Inc. Copyright © Premio Inc.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Manual Released
2017/10/26
1.1
Power
Connector Definition Revised
2017/11/02
1.2
GPIO Sample Code Revised
2018/02/09

RCO-3000 | User’s Manual
5
Safety Precautions
Before installing and using the equipment, please read the following precautions:
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The power outlet shall be installed near the equipment and shall be easily accessible.
Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
of power could ruin sensitive components. Make sure the equipment is properly grounded.
When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
Avoid the dusty, humidity and temperature extremes.
Do not place heavy objects on the equipment.
If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
The storage temperature shall be above -30°C and below 85°C.
The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface

RCO-3000 | User’s Manual
6
Technical Support and Assistance
1. Visit the Premio Inc website at www.premioinc.com where you can find the latest information
about the product.
2. Contact your distributor, our technical support team or sales representative for technical support if
you need additional assistance. Please have following information ready before you call:
Model name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages
Conventions Used in this Manual
Preface
This indication alerts operators to an operation that, if not strictly observed,
may result in severe injury.
WARNING
This indication alerts operators to an operation that, if not strictly observed,
may result in safety hazards to personnel or damage to equipment.
CAUTION
This indication provides additional information to complete a task easily.
NOTE

RCO-3000 | User’s Manual
7
Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.
Item
Description
Q’ty
1
RCO
-3000 Series Embedded System 1
2
Utility DVD Driver
1
3
Wall Mount Kit
1
4
Accessory Kit
1
5
DVI to VGA Adapter
1
Preface
Ordering Information
Model No. Product Description
RCO-3000 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN
RCO-3000-4L Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 6x LAN
RCO-3000-4L-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 LAN
RCO-3000-4P Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x PoE
RCO-3000-4P-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 PoE
RCO-3011E Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Porcessor, 2x LAN, 1x PCIe X4 slot
RCO-3011E-4L Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 6x LAN, 1x PCIe x4 slot
RCO-3011E-4L-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor,2x LAN, 4x M12 LAN, 1x PCIe x4 slot
RCO-3011E-4P Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x PoE, 1x PCIe x4 slot
RCO-3011E-4P-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 PoE, 1x PCIe x4 slot
RCO-3011P Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 1x PCI slot
RCO-3011P-4L Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 6x LAN, 1x PCI slot
RCO-3011P-4L-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 LAN, 1x PCI slot
RCO-3011P-4P Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x PoE, 1x PCI slot
RCO-3011P-4P-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 PoE, 1x PCI slot

RCO-3000 | User’s Manual
8
Preface
Model No. Product Description
RCO-3022EE Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 2x PCIe x4 slot
RCO-3022EE-4L Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 6x LAN, 2x PCIe x4 slot
RCO-3022EE-4L-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 LAN, 2x PCIe x4 slot
RCO-3022EE-4P Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x PoE, 2x PCIe x4 slot
RCO-3022EE-4P-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 PoE, 2x PCIe x4 slot
RCO-3022PP Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 2x PCI slot
RCO-3022PP-4L Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 6x LAN, 2x PCI slot
RCO-3022PP-4L-12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 LAN, 2x PCI slot
RCO-3022PP-4P Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x PoE, 2x PCI slot
RCO-3022PP-4P-M12 Advanced Fanless Embedded System with 5th Gen Intel® Broadwell Core™ i5/i3 or Celeron®
Processor, 2x LAN, 4x M12 PoE, 2x PCI slot
Optional Accessories
Model No. Product Description
1
-E09A06002
Adapter AC/DC 12V 5A 60W with 3pin Terminal Block Plug 5.0mm Pitch,
GSM60A12
-CT
1
-E09A22101
Adapter AC/DC 24V 9.2A 220W with 3pin Terminal Block Plug 5.0mm Pitch,
GST220A24
-CT
SFICBL022
Power Cord, 3
-pin US Type, 180cm
1
-TPCD00002
Power Cord, European Type, 180cm
1
-TPCD00001
Power Cord, 3
-pin UK Type, 180cm
3
-DINR-0003
DIN
-Rail Mount Kit
1
-TZZZ00001
DVI
-I(M) TO DVI-D(F) + VGA(F) Cable, L=120mm, C129P012H1211

Chapter 1
Product Introductions

RCO-3000 | User’s Manual
10
1.1.1 Key Features
Onboard Intel® Core ™ i5-5350U (2.9GHz) / Core™ i3-5010U (2.1GHz) / Celeron ® 3765U (1.9GHz) Dual
Core processor
1x DDR3L SO-DIMM Max. up to 8GB
Triple Independent Display from 1x DVI-I and 1x DisplayPort
2x Intel® GbE Port, Support Wake-on-LAN and PXE (RCO-3000, RCO-3011E/P,RCO-3022EE/PP Only)
6x Intel® GbE Port, Support Wake-on-LAN and PXE (RCO-3000-4L, RCO-3000-4L-M12, RCO-3011E/P-4L,
RCO-3011E/P-4L-M12, RCO-3022EE/PP-4L, RCO-3022EE/PP-4L-M12 Only)
6x Intel® GbE Port with 4x PoE Function, Support Wake-on-LAN and PXE (RCO-3000-4P, RCO-3000-4P-M12,
RCO-3011E/P-4P, RCO-3011E/P-4P-M12, RCO-3022EE/PP-4P, RCO-3022EE/PP-4P-M12 Only)
2x USB 3.0, 6x USB 2.0
4x RS232/422/485 Port
4x Isolated DI, 4x Isolated DO
1x Removable 2.5" SATA HDD Bay and 1x Internal 2.5” SATA SSD/HDD Bay
2x mSATA (Shared by 2x Mini-PCIe Socket) and 2x SIM Card Socket
9~48VDC Power Input, support AT/ATX Mode
2x Mini-PCIe Socket for Wi-Fi, GSM, or I/O Expansion
1x PCIe x4 Expansion (RCO-3011E Series Only)
1x PCI Expansion (RCO-3011P Series Only)
2x PCIe x4 Expansion (RCO-3022EE Series Only)
2x PCI Expansion (RCO-3022PP Series Only)
Remote Power On/Off Switch
1.1 Overview
Based on 5th Gen. Intel® Core™ i5-5350U (2.9GHz) / i3-5010U (2.1GHz) or Celeron® 3765U (1.9GHz)
Dual Core processor, RCO-3000 series is an extreme features integration, outstanding system
performance, versatile I/O connections, and rugged reliability fanless embedded systems. It offers
modularize expansion I/O, rich connectivity interfaces, wide range (9~48V) DC power input, and high
reliability even operating in temperature extremes (-40°C ~ +70°C).
Featuring with completely cable-less designed, high functional, one-piece housing design, and anti-
vibration, RCO-3000 series are ruggedized systems that can operate in harsh environments and easy to
install and maintain. A build in over voltage protection (OVP), over current protection (OCP), reserve
voltage protection, and wide range DC power input makes RCO-3000 series are safety system for all
industrial applications.
Chapter 1: Product Introductions
RCO-3000 Series RCO-3022 SeriesRCO-3011 Series