Premio RCO-6100 Series User manual

USER’S
MANUAL
RCO-6100 Series
Superior Fanless Embedded System

RCO-6100 Series l User’s Manual
Table of Contents
2
Prefaces ……………………………………………………………………………………………….. 04
Revision ………………………………………………………..……………………………..……………….……….. 04
Disclaimer ……………………………………………………….…….……………….………………….………….. 04
Copyright Notice …………………………………….…….….………………………………….………………… 04
Trademarks Acknowledgment …………..………….………………………………………................... 04
Environmental Protection Announcement ……………………………………..……..……………….. 04
Safety Precautions ……………………………………………………………………………………….….…….. 05
Technical Support and Assistance ………………………………...……………………..…….…….……. 06
Conventions Used in this Manual …………………………………..……………………......….……….. 06
Package Contents ……………………………………………………………………..…..…………………….… 07
Ordering Information …………………………..……………………………………..………..….….………… 07
Optional Accessory …………...……………………………………................................................. 09
Chapter 1 Product Introductions ……………………………………………………..… 10
1.1 Overview ………………….………………………………..………….…………..……………….. 11
1.1.1 Key Feature ………….…………………..…………….……….…..…..…………....... 11
1.2 Hardware Specification ….………..………….....…………….……..……..……………… 12
1.3 System I/O ………..……………..……………………..……………………..…………………… 13
1.3.1 RCO-6100 / RCO-6100-4L(P)
RCO-6100-4L(P)-M12 / RCO-6100-D10G……..…………………… 13
1.3.2 RCO-6111/RCO-6111-4L(P)/ RCO-6111-4L(P)-M12/
RCO-6111-D10G ……..…………………………..……………………..…………16
1.3.3 RCO-6122/RCO-6122-4L(P)/ RCO-6122-4L(P)-M12/
RCO-6122-D10G …..……..……………………..………………………..…….... 19
1.4 Mechanical Dimension ……………………..………………………..…..………….……….. 22
1.4.1 RCO-6100 / RCO-6100-4L(P) / RCO-6100-4L(P)-M12 /
RCO-6100-D10G…………………………………….………………….………………….. 22
1.4.2 RCO-6111E / RCO-6111E-4L(P) / RCO-6111E-4L(P)-M12 /
RCO-6111E-D10G
RCO-6111P / RCO-6111P-4L(P) / RCO-6111P-4L(P)-M12 /
RCO-6111P-D10G …..…………………………………………………..….…............. 23
1.4.3 RCO-6122E / RCO-6122E-4L(P) / RCO-6122E-4L(P)-M12 /
RCO-6122E-D10G
RCO-6122P / RCO-6122P-4L(P) / RCO-6122P-4L(P)-M12 /
RCO-6122P-D10G …..…………………………………………………..….….............. 24
Chapter 2 Switches and Connectors …………….……………………………………. 25
2.1 Switch and connector Locations ………………………………………..…….….…….... 26
2.1.1 Top View ………………………………………………………………………..…..……… 26
2.1.2 Bottom View ……………………………………………………………..……..……….. 27
2.2 Connector / Switch Definition ……………………………….……….…….……............. 28
2.3 I/O Interface Descriptions ........................................................................... 29
2.3.1 LPC Debug Con.................................................................................... 29
2.3.2 Power Con .......................................................................................... 30
2.3.3 DC IN/IGN IN (+9V ~ +48V) ................................................................. 31
2.3.4 COM Con ............................................................................................. 32
2.3.5 SF100 SPI Con ..................................................................................... 34

RCO-6100 Series l User’s Manual
3
Chapter 3 System Setup …………………………..…………………………….…………… 64
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing …………………………………………………………………………………………….. 65
3.2 Removing chassis bottom cover ………………...………………………………………..... 65
3.3 Removing PCIe/PCI expansion module …….……………..….…….…..….…………... 66
3.4 Removing chassis top cover …………….…………………………….….………………...... 67
3.5 Installing SODIMM …………….…………………………..…….…………………………....... 68
3.6 Installing CPU ……………………...…………………………..….……………………………...... 69
3.7 Installing Mini PCIe card / mSATA ……………………...…….….……………………...... 74
3.8 Installing Mini M.2 2280 NVMe SSD ………................................................... 75
3.9 Installing WiFi Module ..………...…….………………….……………………..…………...... 76
3.10 Installing Mini PCIe card / 4GLTE………..…………………………………………………... 79
3.11 Installing antenna ………………...…….………………….……………………..…………...... 80
3.12 Assembly chassis top cover …...…….………………………………………..…………...... 82
3.13 Install HDD/SSD on the internal SATA bay …...…….…………………..….………..... 84
3.14 Installing HDD on removable SATA HDD/SSD bay ……………………..………...... 86
3.15 Installing PCIe/PCI expansion card ………………..…………………..……..………...... 87
3.16 Assemble PCIe/PCI expansion module ……………….……………..……..………...... 89
3.17 Assemble chassis bottom cover ………………..………………..……..……….……...... 90
3.18 Installing SIM card ………………..…………………..…….………..………….…….……...... 91
3.19 Installing wall mount kit …………..……………....………………..……..……….……...... 92
Chapter 4 BIOS Setup …………………………………………..……………..……………… 93
4.1 BIOS Introduction …….……….……………………………………….…….…..….…………... 94
4.2 Main Setup ……..……….………………….…………………………..….….………………...... 95
4.3 Advanced Setup …………………………………………..………………………………………… 96
4.3.1 Connectivity Configuration ..…………..…………………………..………….……. 97
4.3.2 CPU Configuration ……..………………………………..………..……………..……... 98
4.3.3 PCH-FW Configuration ………………..……………….………….……………..….... 99
4.3.4 SATA and RST Configuration …………………………………………..………….... 100
4.3.5 RST (UEFI RAID) Configuration ……………………………………….………….... 101
4.3.6 Trusted Computing ……………………………..……………….………………..….... 103
4.3.7 ACPI Settings ……………………………………………………….………………..….... 104
4.3.8 Super IO Configuration……………………….………………..…………………….... 105
4.3.9 Hardware Monitor………………………………………......………………..……..... 112
4.3.10 Serial Port Console Redirection ……………..………….………….….…….…....114
4.3.11 Network Stack Configuration ……………..…………………………..…………....115
4.3.12 CSM Configuration ……………………………..……………..……..…………………. 116
4.3.13 USB Configuration …………………………..………………………….………..…….. 117
4.4 Chipset ………..………………….…..….…..…………………………………………………..….... 118
4.4.1 System Agent (SA) Configuration ………….…………………..………………….. 118
4.4.2 PCH-IO Configuration ………….……………………….………………..…………….. 122
4.5 Security …………...….………………….…..….………………………………………..…………... 127
4.6 Boot …………...……….….………………….…..………………………..…………..……………... 130
4.7 Save & Exit …...……….….………………….…..….…..………………………………………..... 131
Appendix WDT & GPIO …………………………………………………………………………… 132
WDT Sample Code …….……………………….……………….……………..….…….…….…………... 133
GPIO Sample Code ………………………………………………………..…………………………………. 134

RCO-6100 Series l User’s Manual
4
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. Premio
Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The
information in this document is subject to change without notice and does not represent a commitment on
the part of Premio Inc.
Premio Inc. disclaims all warranties, express or implied, including, without limitation, those of
merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must
take full responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
without the prior written permission of Premio Inc. Copyright © Premio Inc.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Manual Released
2020/11/01

RCO-6100 Series l User’s Manual
5
Safety Precautions
Before installing and using the equipment, please read the following precautions:
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The power outlet shall be installed near the equipment and shall be easily accessible.
Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
of power could ruin sensitive components. Make sure the equipment is properly grounded.
When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
Avoid the dusty, humidity and temperature extremes.
Do not place heavy objects on the equipment.
If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
The storage temperature shall be above -30°C and below 85°C.
The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface