Premium PFS1812 User manual

Model Nominal Voltage Nominal frequency N ominal P ow er
PFS1812 120V 60H Z 60W

1.READ ALL INSTRUCTIONS BEFORE USE!
2.Check that the voltage in your home
corresponds to that stated on the appliance.
3.Only connect the fan to a grounded socket with
a corresponding voltage as mentioned on the
article.
4.Use the fan only as described in this manual.
5.This product is intended for household use
ONLY.
6.Not for commercial, industrial, or use outside.
7.To protect against electrical shock, do not
immerse unit, plug or cord in water or any other
liquids.

8.Do not spray the fan with liquids.
9.Do not cover the fan
10.'o not use in humid spaces or near a sink.
11.'o not use in the presence of explosive andRU
highly flammable fumes.
12.'o not place the article or any part of it near
open fire or another heat source.
13.7his appliance is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge. Close supervision is necessary
when any appliance is used by or near children.
This appliance is NOT intended for use by
children.
14.&lose supervision is necessary when any
appliance is used near children.
15.3lace always out of children’s reach.
16.$lways place on a level surface.

17.5emove all objects in the direct vicinity of
the article to avoid blocking the swerving
mechanism.
18.1ever put anything through the ventilation
roster and always keep under supervision when
switched on.
19.'o not place near an open window.
20.$lways unplug from socket when:
- not in use
- moving the article from one location to another
- servicing parts
- before cleaning the article
21.'o not use when:
- plug or cord are damaged.
- the article has fallen.
- the article is not functioning properly.
- the article is damaged in any way.
22.'o not hang or mount fan on a wall orFHLOLQJ

23.'o not operate without fan grills properly in
place.
24.:hen the cord is damaged it has to be
replaced by a professional electrician.
25.'o not immerse in water.
26.(nsure that the fan is not connected to the
mains supply before cleaning.
27.:ipe the fan body clean with a clean, soft
damp cloth.
28.5emove the guard assemblies and pull off
the fan blade; then wash in warm soapy water to
clean and dry immediately. Ensure the guards
and fan blade are thoroughly dry before
reassembling.
29.'o not immerse the fan or its cord in water
or any other liquid.

2.Turn the speed dial to one of the three speeds: 1,
1.Do not touch the blades or grills with your hands
or put any object close to the fan until the fan
blades are completely stopped.
2.Do not pull the power cord to avoid the fan from
falling off.
3.When the cord is damaged it has to be replaced
1.Turn off and disconnect from power before
cleaning.

2.Take off the front grill and blades. Use a soft
cloth to carefully clean the grills and blades.
3.Do NOT bend or alter the blades shape to avoid
a safety hazard.
4.Replace the blades and grill.

1. Use this fan only as described in this manual
Other use is not recommended as it may cause
fire, electric shock or injury to persons.

2. This product is intended for household use
ONLY and not for commercial industrial or
outdoor use.
3. To protect against electric shock, do not lace
fan in window, immerse unit, plug or cord in
water or spray with liquids.
4. This appliance has a polarized plug (one
blade is wider than the other) To reduce the
risk of shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving the
fan from one location to another and before
cleaning.
7. To disconnect the fan, first turn the unit OFF,
grip the plug and pull it from the wall outlet.
Never pull the plug by the cord.

8. DO NOT operate the fan in the presence of
explosive and/or flammable fumes.
9. DO NOT place the fan or any parts near an
open flame, cooking or other heating
appliance.
10. DO NOT operate the fan with a damaged
cord or plug or if the product malfunctions, is
dropped or damaged in any manner (see
warranty).
11. DO NOT use an extension cord or power
strip with this fan.
12. Avoid contact with moving fan parts.
13. The use of attachments not recommended
by the manufacturer may be hazardous.
14. Place the fan on a dry level surface.
15. DO NOT hang or mount fan on a wall or
ceiling.
16. DO NOT operate if the fan housing is
damaged.
17. A loose fit between the AC outlet
(receptacle) and plug may cause overheating

and a distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
18. DO NOT operate any fan with a damaged
cord or plug Discard any damaged fan. Return
the fan to the retailer where the fan was
purchased or request a return authorization to
return for examination and/or repair.
19. DO NOT run fan cord under carpeting.

DO NOT cover cord with throw rugs, runners,
or similar coverings.
DO NOT route cord under furniture or
appliances. Arrange cord away from traffic
areas and where it will not be tripped over.
FOR US MODELS ONLY- This product
employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the
user servicing instructions (follow product
marking for proper fuse rating) and check the
product. If the replacement fuse blows, a

that the fuse on your fan has blown, grasp
the plug and remove it from the receptacle
or other outlet device. Do not unplug by
pulling on cord.
2.Slide the fuse cover, located on top of the
plug towards the prongs of the plug (fig-1)
3.Carefully remove the blown fuse and snap
a new fuse into place.
4.To Reduce the Risk of Fire, replace fuse
with a Max 5 Amp, 125 volt fuse. Fully
close the fuse door by sliding back into
place (Fig. 2) and discard the blown fuse.
The plug should now be ready for normal
use.

To Reduce the Risk of Fire, do not replace the
attachment plug. It contains a safety device
(fuse) that should not be removed.
Discard product if the attachment plug is
damaged.

1. Rejilla Frontal
2. Aspas
3. Rejillas Posterior
4. Motor
5. Interruptor
6. Soporte
7. Cubierta de la base
8. Tornillo
9. Base
Modelo Voltaje nominal Frecuencia Nominal Potencia Nominal
PFS1812 120V 60H Z 60W

6. No para uso comercial, industrial o exterior.
7. Para protegerse contra descargas eléctricas, no
sumerja la unidad, el enchufe ni el cable en agua u
otros líquidos.
8. No rocíe el ventilador con líquidos.
9. No cubra el ventilador
10. No lo use en espacios húmedos ni cerca de un
fregadero.
11. No lo use en presencia de vapores explosivos o
altamente inflamables.
12. No coloque el artículo o parte de él cerca de
fuego abierto u otra fuente de calor.
13. Este aparato no debe ser utilizado por personas
con capacidades físicas, sensoriales o mentales
reducidas, o sin experiencia y conocimiento. Es
necesaria una supervisión estricta cuando cualquier
dispositivo es utilizado por niños o cerca de ellos.
Este electrodoméstico NO está diseñado para ser
utilizado por niños.

14. Es necesaria una supervisión estricta cuando se
usa cualquier artefacto cerca de niños.
15. Coloque siempre fuera del alcance de los niños.
16. Siempre coloque en una superficie nivelada.
17. Retire todos los objetos en las inmediaciones del
artículo para evitar el bloqueo del mecanismo de
giro.
18. Nunca coloque nada a través de las rejillas de
ventilación y mantenga el aparato siempre bajo
supervisión cuando esté encendido.
19. No coloque cerca de una ventana abierta.
20. Desenchufe siempre de la corriente eléctrica
cuando:
- no esté en uso
- vaya a mover el artículo de un lugar a otro
- haga servicio o mantenimiento
- vaya a limpiar el artículo
21. No utilice cuando:
- el enchufe o el cable estén dañados.