Prestigio MultiPhone PAP4040 User manual

PAP4040 EN - 1
Quick Start Guide
Prestigio MultiPhone
PAP4040
EN
1. Packing List
1. Prestigio MultiPhone
2. AC Adapter
3. Earphones
4. USB Cable
5. Quick Start Guide
6. Warranty Card
7. Legal and Safety Notices
8. Battery
2. Device Overview
3. Uninstalling the back cover and battery
Uninstalling the back cover: hold the side of device tightly with one hand and lift up the back cover at its buckle
Vol +\ Vol - Button
Adjust the volume level
Power
Turn on/off the device;
Suspend/Activate the device
Earphone Jack
Earphones connection.
USB port
Micro USB cable connection
Menu
Display menu options
Home
Back to the Home screen
Back
Back to the previous page
Search
Search the web and your phone
Speaker
Listen to phone calls or music
Camera
Take photos
9
8
7
6
5
4
3
2
1
10
1
7
6
2
3
1
4
9
8
5
10

EN-2 PMP4040
Quick Start Guide
Prestigio MultiPhone
PAP4040
EN
with the other hand.
Taking out the battery: hold the side of device tightly with one hand and pull up the battery handle with the other
hand.
4. Installing the SIM cards and Micro SD card
a. Insert SIM cards
The slot at the bottom is card 2 slot for GSM card, the other is card 1 slot for 3G WCDMA card (compatible with
Insert SIM2
Insert SIM1
Insert SD Card

PAP4040 EN - 3
Quick Start Guide
Prestigio MultiPhone
PAP4040
EN
2G card).
Please make sure the gold contact area on the SIM2 is facing upwards, and the SIM1 is facing downwards.
b. Insert Micro SD card
To insert a Micro SD card, place the card connector towards the front side of the device and the printing side of
the card towards the rear side of the device.
To remove the micro SD card, pull the card out of the slot.
5. Charging
Insert one end of USB cable into the USB port on the
device and plug the power adapter to the electrical socket.
Normally it takes approximately 3.5 hours to fully charge
the device. Operating the device while charging with the
AC adapter may extend the charging time.
Notice: If you don’t use your phone for a long time, it will gradually discharge. Please charge it first before your
next use or charge the phone every 3 months even you don’t use it.
6. Power on/Sleep Mode/Power off
Press and hold the Power Button for a few seconds. It will automatically enter the Home screen after start-up
screen.
Press the Power Button once to enter sleep mode and press it again to awake the device.
Press and hold the Power Button, and then tap on Power off/Standby to power off the device or to enter sleep

EN-4 PMP4040
Quick Start Guide
Prestigio MultiPhone
PAP4040
EN
mode.
Technical Specifications
Processor
Cortex A9 at 1 GHz
Memory
512MB RAM + 4GB eMMC, Micro SD slot supports up to 32GB
OS
Android 4.0.3 (Ice Cream Sandwich)
Display
4”TFT LCD, Capacitive multi-touch
Resolution
480x 800 pixels
Net Mode
WCDMA + GSM (UMTS:900/2100MHz; GSM:850/900/1800/1900MHz)
Interfaces
Communications
Battery
USB 2.0, Micro SD (micro SDHC compatible), USB Host
WiFi (802.11 b/g/n), 3G
1500 mAh Li-Poly battery
Dimensions
124*64*10.95mm (L x W x H)
Weight
140g

PAP4040 EN - 5
Quick Start Guide
Prestigio MultiPhone
PAP4040
EN
Disclaimer
As the Prestigio products are constantly updated and improved, your device’s software and hardware
may have a slightly different appearance or modified functionality than presented in this Quick Start
Guide.
Prestigio hereby states that this Smartphone complies to basic requirements and another relevant regulations given
by the EU directive1999/5/ES. Full version of the declaration of conformity is available on
http://www.prestigio.com/compliance.