Prestigio ROADRUNNER 185 User manual

ROADRUNNER 185
Video recorder
Article number: PCDVRR185
User manual
Version 1.0

ROADRUNNER 185
©2021 Prestigio
2
Introduction
With the RoadRunner 185 compact DVR, you'll always be aware of what's going on and have no
problem seeing license plates, even on the move. You can also use it to quickly and easily
resolve disputes on the road.
This manual contains a detailed description of the unit as well as instructions for its operation.
Copyright
Copyright ©Prestigio. All rights reserved.
All trademarks, trade names, logos and other symbols mentioned herein are the property of
their respective owners.
Prestigio reserves the right to make changes to this document without prior notice to customers
and shall not be liable for any possible negative consequences that may arise due to technical
and/or typographical errors and/or the use of an outdated version of this document.
Any references to names of other companies, brands and equipment in this document are for
the sole purpose of explanation and description of the devices and do not infringe on any
person's intellectual property rights.

ROADRUNNER 185
©2021 Prestigio
3
Responsibility and technical support
This document has been prepared in accordance with all necessary requirements and contains
detailed information on the operation of the device which is current at the date of issue.
Prestigio reserves the right to modify and make changes and additions to this document
without prior notice to users and shall not be liable for any negative consequences resulting
from the use of an outdated version of this document, or for any technical or typographical
errors or omissions, or incidental or consequential damages that could arise from the
transmission of this document or the use of the device.
Prestigio makes no warranty of any kind with respect to the material herein, including but not
limited to the merchantable condition and suitability of the product for any particular purpose.
If you have any technical questions, please contact your local Prestigio representative or contact
the technical support department at www.prestigio.com/use. The most common problems
encountered are described in Section 7 of this document and on the www.prestigio.com where
you can also download the latest version of this manual.
Information about the manufacturer:
Prestigio Plaza Ltd.
Cyprus, Limassol 4040, Spirou Kyprianou 26.
Country of manufacture: China.
www.prestigio.com

ROADRUNNER 185
©2021 Prestigio
4
Conformity to standards
The device is CE certified and meets the requirements of the following
European Union directives:
Directive 2014/30/EU on electromagnetic compatibility;
Low Voltage Directive 2014/35/EU.
The device meets the requirements of the RoHS Directive 2011/65/EU on the
restriction of hazardous substances.
The device has passed all assessment procedures established in the technical
regulations of the Customs Union and complies with the norms of the
Customs Union countries.
National Mark of Conformity of Ukraine, indicating that the device meets all
required technical regulations.
The product packaging is made entirely or partially from recyclable raw
materials and can also be recycled.
It is recommended that the packaging of this product be thrown in the trash.
The symbols of the crossed-out wheeled garbage can are shown in accordance
with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)*
and Directive 2006/66/EC on batteries and accumulators and battery and
accumulator waste, and indicate that this equipment requires separate collection
after its end of life and must be kept separate from unsorted municipal waste.
According to the regulations, the device, its batteries and accumulators, and
its electrical and electronic accessories must be disposed of separately at the
end of their service life. Do not dispose of the device together with unsorted
municipal waste, as this would be harmful to the environment.
To dispose of the device, batteries and accumulators, as well as its electrical
and electronic accessories, must be returned to the point of sale or turned in
to your local recycling facility.
For more information about recycling this unit, contact your local household
waste disposal service.
*Waste Electrical and Electronic Equipment, or WEEE, means used electrical or electronic equipment, including all
components, assemblies, consumables that are part of the equipment at the time it is taken out of service (including
supplied batteries/rechargeable batteries (if any), components containing mercury, etc.).

ROADRUNNER 185
©2021 Prestigio
5
EN
RU
EE
KZ
LT
LV
RO
SI
UA
Information about the certificates received is listed in Section 6
of this document. Copies of certificates and reports can be found
in the appropriate section of the www.prestigio.com/certificates.

ROADRUNNER 185
©2021 Prestigio
6
Rules for safe use
Please read the information in this section of the document carefully before using the unit.
WARNING! The warnings, precautions and instructions in this document may not contain all
possible and dangerous situations. Use common sense when using the device.
1. Place the device in a location in the passenger compartment that does not obstruct the
driver's view or interfere with the deployment of the airbags.
2. Do not block the view area of the camera with foreign objects.
3. Make sure the device is securely fastened. It must not move during movement.
4. Do not remove the memory card while the power is on. This can damage the card.
5. Do not use the DVR memory card with other devices. Video files cannot be saved in this
case.
6. Do not insert foreign objects into the memory card slot. This can cause damage to the
device.
7. Do not perform any operation on the device while the vehicle is in motion. Stop it in a safe
place beforehand.
8. The Micro-USB port on the DVR is for charging the device only.
9. To charge the device from the cigarette lighter of a car, use only the original car charger
included in the package. The manufacturer shall not be liable for any consequences,
whether direct or indirect, arising from the use of the vehicle charger for purposes other
than its intended use, or for powering or recharging a device other than the one supplied
with it.
10. Do not use force when plugging in external devices. This can damage the contacts.
11. To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
12. If you see signs of smoke, turn off power to the unit immediately.
13. Do not expose the unit to fire.
14. Do not expose the unit to sudden temperature fluctuations due to possible condensation.
15. Do not allow the device to come into contact with sources of strong electromagnetic
radiation.
16. Do not use the device in places prohibited for the operation of electronic devices.
17. Keep the camera lens clean. Use a soft cloth for cleaning; do not use water or corrosive
liquids.
18. Do not touch the surface of the screen with sharp objects.
19. Do not apply excessive pressure or place objects on the display.
20. Protect the device from excessive force and shock. Doing so may cause it to become
damaged or malfunction.
21. If any malfunctions are found, you should stop using the device and contact a Prestigio
Authorized Service Center. Do not attempt to repair the device yourself.

ROADRUNNER 185
©2021 Prestigio
7
Contents
Introduction................................................................................................................................................................... 2
Copyright ....................................................................................................................................................................... 2
Responsibility and technical support................................................................................................................... 3
Conformity to standards........................................................................................................................................... 4
Rules for safe use ........................................................................................................................................................ 6
1 General description and characteristics .......................................................................................................... 8
1.1 Purpose of the device......................................................................................................................................... 8
1.2 Technical data .....................................................................................................................................................11
1.3 Package Contents ..............................................................................................................................................12
1.4 Packaging and labeling....................................................................................................................................12
2 Operating instructions device...........................................................................................................................13
2.1 Charging the battery.........................................................................................................................................13
2.2 Device installation..............................................................................................................................................13
2.3 Installing the memory card ............................................................................................................................14
2.4 Starting the DVR.................................................................................................................................................15
2.5 Configuring the DVR.........................................................................................................................................15
2.6 Video Recording.................................................................................................................................................17
2.7 File Management ...............................................................................................................................................17
2.8 Camera mode......................................................................................................................................................17
2.9 Creating a screenshot.......................................................................................................................................17
2.10 Playing files on a PC .......................................................................................................................................18
3 Care Recommendations......................................................................................................................................19
4 Warranty obligationsand warranty service procedure.............................................................................20
5 Rules of storage, transportation and disposal............................................................................................22
6 Other information .................................................................................................................................................23
7 Troubleshooting.....................................................................................................................................................24
8 Glossary.....................................................................................................................................................................25
Figures and tables
Figure 1 –Appearance ................................................................................................................................................ 8
Figure 2 –Components and controls...................................................................................................................... 9
Table 1 –Functions and purpose of the buttons ............................................................................................10
Table 2 –Status of light indicators .......................................................................................................................10
Table 3 –Main technical characteristics..............................................................................................................11
Table 4 –Typical errors and solutions.................................................................................................................24

ROADRUNNER 185
©2021 Prestigio
8
1 General description and characteristics
1.1 Purpose of the device
The RoadRunner 185 DVR records video in FullHD format, ensuring realistic color reproduction
and maximum image clarity.
You can find out the license plate number even while driving. In addition, all videos can be
viewed from the comfort of the car, on a compact LCD display.
Key benefits of the RoadRunner 185 DVR:
Quick-release Magnetic mount with power supply
Take off and install the RoadRunner 185 in seconds on the magnetic mount with power through
the micro-USB input.
High quality recording at any time of day
The RoadRunner 185 compact DVR records high quality video with FullHD resolution
(1920×1080) at 30 frames per second, and the 140° viewing angle covers up to 5 lanes of traffic.
With the night shooting mode every emergency situation will be recorded at any time of the
day.
A clear picture
The IPS sensor delivers high-quality images regardless of the viewing angle and provides
enhanced color reproduction.
G-sensor for fixing accidents
When the shock sensor (G-sensor) is triggered, the video recording of the accident will be
automatically saved to a separate folder and will be protected from being overwritten.
Additional attachment included
Choose the most suitable way of installation: the magnetic holder on the suction cup comes
with an additional attachment on the 3M adhesive tape. Thanks to the two mounts included,
you can take the DVR with you in any car, which is convenient when you have several cars.
Figure 1 –Appearance

ROADRUNNER 185
©2021 Prestigio
9
Figure 2 –Components and controls
Components and controls
1. Micro-SD card slot
2. Reset button [RESET]
3. Microphone [MIC]
4. Lens
5. Speaker
6. Power button
7. Connector for holder attachment
8. Micro-USB connector for power connection
9. Mode button [M]
10. Main menu button [≡]
11. Select/Confirm/Pause/Play Video/Photo Button [OK]
12. Move up button [▲]
13. Down Button [▼]
14. LCD display
15. LED device status indicator
16. LED charging mode indicator
17. Holder with suction cup
18. Holder micro-USB connector for power connection

ROADRUNNER 185
©2021 Prestigio
10
Functions and button assignments
Table 1 –Functions and purpose of the buttons
Title
Functions and purpose
Reset button [RESET]
Restarting the device
Power button
Turning the device on/off
Mode button [M]
Changing the operating mode of the device.
In recording mode, press to protect the recorded
file from being overwritten
Main menu button [≡]
In standby mode, press to access the settings
menu.
In the menu - return to the previous menu
Selection/confirmation/pause/pause button
to play back the video/photo [OK]
Selects/confirms settings or menu items.
Pause/playback in video recording mode.
Pause/playback during video playback.
Activating changes, making and confirming new
settings.
View the selected file.
In standby mode, press to take a photo
Move up button [▲]
Menu navigation.
Move between files in viewing mode.
During video recording, press to take a
screenshot
Down Button [▼]
Menu navigation.
Moving between files in viewing mode
Table 2 –Status of light indicators
Indicator
Status
Description
Red
Lights up all the time
The DVR is charging
Green
Lights up all the time
DVR is fully charged
Blue
Shimmering
Video file recording in progress
Blue
Lights steadily without
flicker
Power is connected

ROADRUNNER 185
©2021 Prestigio
11
1.2 Technical data
Table 3 –Main technical characteristics
Parameter
Value
General information
Item number
PCDVRR185
Processor
Jieli AC5601
Color
Black
Case Material
ABS plastic
Connector
micro-USB
Screen size
2"/5.1 cm
LCD display technology
IPS
Main Features
Sensor
GC2053
Sensor resolution
2 MP
Optical sensor size
1/2,7"
Matrix type
CMOS
Viewing angle
140°
Shooting options
Maximum video recording resolution
FHD 1080p
Maximum frame rate
30 fps
Maximum photo resolution
2 MP
Recording mode
Cyclic
Video codec
H.264
Digital Video Recording Format
MOV
Functions
G-sensor
Yes
GPS sensor
No
Motion sensor
Yes
Cyclic recording
Yes
Parameter
Value
General information
Night Mode
Yes
Electronic Image Stabilization
No
Infrared illumination
No
Digital zoom
No
Built-in speaker
Yes
Built-in microphone
Yes
Memory
Memory type
Flash
Maximum memory card capacity
32 MB
Support for memory cards
micro-SD (SDHC/SDXC) card from 8 to 32 GB
(class 10 or higher)
Nutrition
Car cigarette lighter (input: DC 12-24 V, DC 5 V/1
A output)

ROADRUNNER 185
©2021 Prestigio
12
Parameter
Value
General information
Backup power
Battery
Battery type
Built-in lithium-ion
Battery capacity
180 mAh
Full charge time
1–2 h
Full discharge time
10 min
Dimensions and weight
Dimensions (L x W x H)
63.5 mm × 56.5 mm × 35.4 mm
Weight
60 g
Other information
Operating Temperature
-10 °C to +45 °C
Operating humidity
15 to 65% relative humidity
Storage temperature
-10 °C to +50 °C
Storage humidity
Up to 85% relative humidity
Warranty period
2 years
Declarations
CE, EAC
1.3 Package Contents
The RoadRunner 185 DVR comes with a package:
1.
PCDVRR185 video recorder
1 pc.
2.
Magnetic suction cup mount with micro-USB input
1 pc.
3.
Additional attachment with 3M scotch tape
1 pc.
4.
Car charger with micro-USB cable (cable length 3.6 m)
1 pc.
5.
Quick start guide
1 pc.
6.
Warranty card
1 pc.
1.4 Packaging and labeling
Video recorder The RoadRunner 185 comes individually packaged in 165.5 mm × 142.5 mm ×
53 mm (L×W × H) cardboard with the full name and labeling, list of accessories and main
technical specifications, as well as information about the manufacturer.
Weight of the carton:
net weight: 81 g;
gross weight: 307 g.

ROADRUNNER 185
©2021 Prestigio
13
2 Operating instructions device
Before you use the device, read the information in the "How to use it safely" section.
2.1 Charging the battery
Before using the DVR for the first time, fully charge the battery. It takes at least 1.5 hours to fully
charge the battery from a car power source or at least 3 hours from a USB port on your personal
computer (laptop).
Use your car's cigarette lighter: Charging will start automatically when the ignition is turned
on.
Use the micro-USB cable (not included): Connect the device to the power adapter (not
included) or a USB port of a computer/laptop with an output voltage of 5 V and a current of
at least 500 mA.
While the DVR is charging, the LED indicator of the charging mode will glow red. When the
device is fully charged, the LED indicator will glow green.
WARNING!
The built-in rechargeable battery is designed to terminate the last video recording when
external power is disconnected.
If you do not use the device for an extended period of time, you should fully charge the
battery once every two weeks.
2.2 Device installation
Installing the device on the suction cup mount
1. Follow the directional arrows on the unit to attach the suction cup and secure the unit. Slide
the bottom of the bracket to the mating part on the DVR body. Then turn the bracket until the
locking mechanism engages (you will hear a click).
2. Select a location on the windshield where you want to install the device. Optimal is the middle
of the windshield, next to the rearview mirror.
3. Degrease the glass, remove the protective film from the suction cup holder.
4. Press the mount firmly against the glass and lower the latch.
5. Route the cable along the ceiling and the front pillar of the car so that it does not interfere
with the driver's view.
6. Make sure that the routed cable does not interfere with the deployment of airbags and other
systems.
7. Select the angle of the device to get the best possible image from the DVR camera.
Installing the device on the additional attachment - 3M scotch tape
1. Select a location on the windshield where you want to install the device. Optimal is the middle
of the windshield, next to the rearview mirror.
2. Degrease the glass, remove the protective film from the adhesive part of the holder.
3. Press the mount firmly against the glass.
4. Route the cable along the ceiling and the front pillar of the car so that it does not interfere
with the driver's view.

ROADRUNNER 185
©2021 Prestigio
14
5. Make sure that the routed cable does not interfere with the deployment of airbags and other
systems.
6. Select the angle of the device to get the best possible image from the DVR camera.
NOTE.
The device will not be able to provide the required image quality when placed on a
windshield with excessively dense toning.
Temperature and humidity fluctuations can cause the adhesive part of the holder to detach
from the glass.
2.3 Installing the memory card
To use the video recording functions, you must install a memory card (not included). Make sure
the memory card is correctly positioned (see markings on the device) and insert the card into
the slot until you hear it click into place.
The device automatically recognizes the card as a storage device - all data will be stored on the
memory card.
Иuse a memory card micro-SD card with a read/write speed of at least 10 MB/s and a capacity of
8 GB to 32 GB.
To remove the card, first press it and then pull it out.

ROADRUNNER 185
©2021 Prestigio
15
IMPORTANT!
•The device cannot record video footage or photos without a memory card.
•The memory card should only be installed when the power is off. When using the device for
the first time, format the memory card to FAT32 (read open sources on how to do this).
•Use only tested and recommended memory cards. Otherwise, the manufacturer does not
guarantee correct operation of the device.
2.4 Starting the DVR
1. Connect the car charger with micro-USB cable (included) to the micro-USB power connector
of the DVR.
2. Connect the charger to a vehicle power source (cigarette lighter socket in the car).
3. Once connected to a car power source, the DVR will automatically turn on and start recording
video.
4. To stop the video recording, press the [OK] button.
5. Press the power button to turn the device off.
2.5 Configuring the DVR
Set up the device according to your requirements before shooting video.
To access the settings menu, stop recording (recording starts automatically when the power is
connected) by pressing [OK], then press [≡]. Use the [▲]/[▼] buttons to navigate in the menu.
To activate changes, make and confirm new settings, press the [OK] button. To continue
recording, press [≡] twice and then press [OK].
The following video recorder settings are available
Resolution
Allows you to select the resolution/quality of the recorded video file. Available options: FHD/HD.
Cyclic recording
Allows you to set the duration of each video recording. When the micro-SD card is full, the old,
unprotected entries will be replaced with new files. The following values are available: 1/3/5 min.
or off.

ROADRUNNER 185
©2021 Prestigio
16
Motion sensor
Allows the device to automatically start recording when there is motion in the frame and stop
recording when motion stops. Available options: enable/disable.
Audio recording
Allows you to enable or disable audio recording at the same time as recording video. Available
options: enable/disable.
Marks on the video
Allows you to display the date, time, brand, name, model and license plate number of the car on
the video. Available options: enable/disable.
Date and time
Allows you to set the correct date and time on your device so that they appear correctly on your
videos and photos. Available options: DD/MM/YYY, YYYY/MM/DD, MM/DD/YYYY.
Automatic shutdown
Allows you to set the time after which the device will automatically turn off after you stop
recording. Depending on the selected setting, the unit will switch off automatically after 1/3/5
min.
Disabling the screen
Allows you to set the time after which the screen will automatically turn off if there is no action.
Depending on the selected settings, the screen turns off automatically after 30/60/120 sec. Press
any button to turn on the screen.
Beep
Allows you to turn on/off the sound while pressing the buttons.
Volume
Allows you to set the volume level of the playback sounds on your device. The following options
are available: low/medium/high.
Selecting a language
Allows you to select the interface language of the device. The following languages are available
for selection: EN, RU, BG, BY, EE, HU, KZ, LT, LV, RO, SI, UA.
Update rate
Allows you to select the desired screen refresh rate. Available options: 50/60 Hz.
Turn off delay
Allows you to delay the device shutdown, in order to save the video recording after parking and
turning off the vehicle engine, as well as to save the file correctly. The following options are
available: 10/15/60 sec.
G-sensor settings
Allows you to select the level of G-sensor sensitivity. The smaller the value, the higher the
sensitivity. Thanks to the G-sensor, the video file recording is automatically protected in case of
a collision, jolt or emergency braking. The following values are available: high/medium/low.
Parking mode
Allows you to enable or disable the parking control function. Parking control function is
activated by the G-sensor. When the G-sensor is off, the parking monitor and the processor will
not work. When it is on, the device will switch to parking monitor mode after it is turned off.
Exposition
Allows you to adjust the exposure compensation depending on the light. The following values
are available: -3, -2, -1, 0, 1, 2, 3. When recording in dim light, use a higher exposure value.
Formatting
Allows you to delete all files on the memory card.

ROADRUNNER 185
©2021 Prestigio
17
WARNING! Before formatting, make sure that all important files have been moved to another
storage medium. Once they are formatted, they cannot be recovered.
Reset Settings
Allows you to set the initial settings of the system. All user-defined values will be restored to
defaults.
Software version
Displays the software version of the device.
License plate
Allows you to enter the license plate number of your vehicle into the memory of the device.
2.6 Video Recording
Automatic video recording
Connect the device to the car charger. When you start the car engine, the device will
automatically turn on and start cyclic video recording.
When you turn off the engine, the DVR will save the last recorded file and stop working. Thanks
to the built-in battery, an automatic shutdown, depending on the settings, is available in
10/15/60 seconds.
Recording a video file in manual mode
In recording mode, press [OK] to stop/continue recording.
Recording a protected video file
To protect the currently recording file from being overwritten, press the [M] key.
2.7 File Management
File view mode
To select the file view mode, you must stop recording by pressing [OK], then press [M]. Use the
[▲]/[▼] buttons to move between files. Press [OK] to start watching the selected file. Press the
[M] button to exit viewing mode.
Deleting files
In playback mode, press the [≡] main menu button, then enter the delete files menu. Press
[▲]/[▼] to delete the current file or all files.
Lock/unlock files
In playback mode, press the [≡] main menu button, then enter the file lock/unlock menu. Press
[▲]/[▼] to lock or unlock the current file.
2.8 Camera mode
Stop recording by pressing the [OK] button. Then press [M] to switch to Camera mode and press
[OK] again to take the photo.
2.9 Creating a screenshot
To take a screenshot, press the [▲] button once during video recording.

ROADRUNNER 185
©2021 Prestigio
18
2.10 Playing files on a PC
1. To view or copy a saved video or photo to a PC, connect the DVR to the PC with a USB cable
with data transfer function via the micro-USB port of the DVR.
2. After connecting to a PC, press the power button on the DVR.
3. If video recording has started, stop it by pressing [OK].
4. The DVR memory will be recognized as an external hard drive.
5. Use your computer to manage your files.
6. Disconnect the USB cable to complete the operation.

ROADRUNNER 185
©2021 Prestigio
19
3 Care Recommendations
The RoadRunner 185 Video Recorder does not require any special maintenance during
operation. Nevertheless, in order to maintain proper condition and stable operation of the
appliance, it is advisable to follow the steps below:
•Observe the rules for safe use of the device.
•Periodically clean the device of dirt and dust with a dry soft cloth. The device must be turned
off before cleaning.
•Clean the lens of the DVR regularly.
•Have the device repaired only at service centers.
In the event of warranty repair or replacement, contact the retailer with the receipt and the
purchased device.
For more information on replacing and repairing the device, contact your local representative or
technical support via the www.prestigio.com.

ROADRUNNER 185
©2021 Prestigio
20
4 Warranty obligationsand warranty service procedure
The service life of the device is two (2) years.
You may have other rights under the laws of your country regarding the sale of consumer
goods. This limited warranty does not affect such rights.
The warranty card entitles you to warranty service only under the following conditions: all fields
of the card must be filled out in clear handwriting, the seller's stamp must be available and must
correspond to the seller's details indicated in the card.
The warranty card is valid only if it is filled out correctly and completely by the seller. When
purchasing the unit, check that the serial number and model match the information in the
warranty card.
If the warranty card is incomplete or illegible, it is invalid. In this case, it is recommended that
you contact your dealer to obtain a properly filled out warranty card. It is also allowed to
provide sales and cash receipts or other documents confirming the fact and date of sale of the
device. The date of sale is the date indicated on the sales invoice/cash receipt or other
appropriate document. If the date of sale cannot be determined, the warranty period is
calculated from the date of manufacture of the device.
The manufacturer guarantees that all materials, components and workmanship of Prestigio
brand products are free of defects under normal use during the warranty period. This limited
warranty applies only to the first purchaser of a Prestigio product and cannot be transferred to a
subsequent purchaser.
For warranty replacement, the unit must be returned to the retailer with the receipt. Prestigio
brand products are warranted only in the country of purchase.
WARRANTY SERVICE PROCEDURE
If you discover a suspected defect or defect in the device, you should contact an authorized
service center before the warranty period expires and provide the following information:
1. A device with an alleged defect or defect.
2. Warranty card, drawn up in accordance with the requirements of current legislation, or the
original proof of purchase, with a clear indication of the name and address of the selling
company, as well as the date and place of purchase.
LIMITATION OF LIABILITY
Prestigio brand products are NOT eligible for free warranty service if the following damage or
defects are found:
damage caused by acts of God, accidents, negligence, intentional or negligent actions
(omissions) of the buyer or third parties;
damage caused by the effects of other objects, including but not limited to exposure to
moisture, dampness, extreme temperatures or environmental conditions (or if they change