device turns on and starts video recording automatically if shaking or stroke is detected.
3
User Manual RoadRunner 330
3. Sengs
Before recording, you can set up the device according to your requirements.
-In video/picture preview mode, press [MENU] to enter video/picture
sengs, press it again go the general sengs, press it third me to exit.
-In seng list, use
[ ]/[ ]
to navigate the menu, press [OK] to get the
opons and confirm the selecon, press [MENU] to exit.
Video sengs
General sengs
3
ŸResoluon: Select the resoluon of recorded video: 1920x1080P, 1280x720P, 640x480P
ŸLoop Recording: Set the video duraon (1, 3, 5, 10 minutes or off) for loop recording. When the
microSD card is full, the device will delete the oldest unlocked video file automacally.
ŸExposure: Set exposure value to determine how much light the camera’s sensor receives. For lowlight
situaons, use a higher exposure.
ŸMoon detecon: Turn on or off moon detecon. If there is any moon detected while the car
engine is stopped, your car DVR will start recording automacally.
ŸDate stamp: Add date and me stamp onto videos.
ŸRecord audio: on/off
ŸG-sensor Sensivity: Select the sensivity of the G-sensor. The smaller the number is, the higher the
sensivity is. When reaching the sensive value (such as collision), the recording file will be
automacally protected.
Picture sengs
ŸLong press of MENU buon takes to Picture Mode
ŸCapture Mode: set the mer single/2s/5s/10s
ŸResoluon: Select the picture image size from 12M, 10M, 8M, 5M, 4M, 3M, 2M, 1.3M
ŸSequence: Turn off/on photo sequence
ŸQuality: Set the photo quality Fine/Normal/Economy
ŸSharpness: Adjust the sharpness.
ŸWhite Balance: Select an appropriate white balance, so images have a true-to-life color range. It is for
specific lighng situaons.
ŸColor: Set the photo color Standard/Black&White/Sepia
ŸISO: Set the ISO Auto/100/200/400
ŸDate/Time: Set date and me on device.
ŸAuto Power Off: Set automac power off when the device is not in use.
ŸBeep Sound: Turn off/on beep sound
ŸLanguage: Choose your language.
ŸFrequency: For a given luminance, the frequency of light fluctuaon that evokes a sensaon of flicker.
Set a right flickering frequency to avoid horizontal stripe interference.
ŸFormat: Format the memory card.
ŸDefault Sengs: Restore to default sengs.
ŸScreen Savers: Adjust the screen saver me off/1min/3min/5min
ŸLamp Sengs: Turn off/on the flash light
ŸParking Monitor: Turn off/on parking monitor.
ŸVersion: Display the current system version.
Formang will erase all your stored data. Back up your data before proceeding.
In Parking Mode G-sensor is ON. While power off,
After recording (ÿ30 sec) is finished, the device will turn off until the next event.