Prestigio PMSL1P User manual

High Performance Mouse EN - 1
Package Contents
1. Prestigio Mouse Main Unit
2. USB Receiver
3. Travel Case
4. Quick Guide
5. Warranty Card
6. AAA Alkaline Battery X 2
Product Overviews
Getting Started
Press and slide battery cabinet
cover on top of the device.
Insert batteries as indicated on
the diagram shown.
Fit in battery cabinet cover.
Slide power switch to ON
position.
NOTE:
Low power LED glows for 3 seconds
if the device is powered on.
Turn on PC or notebook.
Insert USB receiver to any of the
USB slot on PC or notebook.
The device now is ready for use.
Top View Bottom View
EN
Track Ball
Battery Cover
On Desk:
Middle Button
In Air:
F5/Esc
Laser
Pointer
Button Low Power
Indicator
Desk Sensor
4th Button
5th Button
Power
ON/OFF
Switch
Channel ID
Button

EN – 2 High Performance Mouse
Basic Operations
The radio connection will be
automatically established once
receiver is properly inserted.
Upon interference, the device
will automatically switch to a
new channel with slight delay in
device operation.
NOTE:
The device automatically enters
sleep mode when not used. Click
any button to resume normal
function.
On Desk
1. Press both left and right buttons
simultaneously to toggle
between DPI 800/1600 modes.
2. Slide track ball to fast-scroll
between pages.
3. The low power indicator will be
illuminated in red if batteries are
in need to replacement. Please
replace batteries immediately
as instructed above.
In Air
1. Slide/roll track ball to control
cursor movement.
2. Press and hold laser pointer
button to pinpoint an object.
3. Press 4th/5th buttons to skip to
next/previous page.
1 2
3
Channel
ID
Button
3
2
1
EN

High Performance Mouse EN - 3
Cautions
Do not direct the laser beam at eyes at all times.
Do not attempt to disassemble or alter any part of the device that is
not described in this guide.
Do not place the device in contact with water or any other liquids.
The device is NOT designed to be liquid proof of any sort.
In the event of liquid entry into interior of device, immediately
disconnect the device from the computer. Continuing use of the
device may result in fire or electrical shock. Please consult your
product distributor or the closest support center.
To avoid risk of electrical shock, do not connect or disconnect the
device with wet hands.
Do not place the device near a heat source or directly expose it to
flame or heat.
Technical Specifications
Model Name PMSL1P
Lens
Laser Lens
Light Source Laser Diode with Built-In Sensor
Resolution 800/1600 DPI Switchable
Connection Type 2.4GHz Dual Direction RF Technology
OS Supported
Windows 2000/ME/XP(32bit)/Vista/7
Power Source Alkaline Battery AAA X 2
Power
Consumption
Operation Mode：< 5.5~8.5mA
Idle Mode: 0.6~0.65mA
(Operation Mode to Idle Mode: 0~1second)
Sleep Mode 1: 0.1~0.12mA
(Idle Mode to Sleep Mode 1: 5 second)
Sleep Mode 2 :0.03~0.05mA
(Sleep Mode 1 to Sleep Mode 2: 420 second)
Weight 90g
Dimensions (mm) 121(L) X 54.0(W) X 36.5(H)
EN