PrimeVOLT PV 4K6HB-60 User manual

PV 4K6HB-60
PV 4K6HB-120
PV 5KHB-120
PV 5KHB-60
PV 6KHB-120
PV 6KHB-60
PV 4K6AC
PV 5KAC
PV 6KAC
USER MANUAL
Single Phase ESS String Inverter

History
VERSION ISSUED COMMENTS
1.0 01-Mar.-23 First release
HistoryHistory
I

Preface
WARNING
CAUTION
DANGER
NOTICE
NOTE
Scope
This manual is applicable to following inverters:
PV 4K6HB-60
PV 4K6HB-120
PV 5KHB-120
PV 5KHB-60
PV 6KHB-120
PV 6KHB-60
About This Manual
Target Group
ESS inverters must be installed by professional electrical engineers who have obtained relevant
qualifications.
Conventions
The following safety instructions and general information are used within this user manual.
Indicates an imminently hazardous situation which, if not correctly followed,
will result in serious injury or death.
Indicates a potentially hazardous situation which, if not correctly followed,
will result in serious injury or death.
Indicates a potentially hazardous situation which, if not correctly followed,
could result in moderate or minor injury.
Indicates a potentially hazardous situation which, if not correctly followed,
could result in equipment failure to run, or property damage.
Call attention to important information, best practices and tips: supplement
additional safety instructions for your better use of the ESS inverter to reduce
the waste of you resource.
PV 4K6AC
PV 5KAC
PV 6KAC
This manual describes the installation, connection, the use of APP, commissioning and maintenance etc. of
ESS inverter. Please first read the manual and related documents carefully before using the product and store
it in a place where installation, operation and maintenance personnel can reach it at any time. The illustrations
in this user manual are for reference only. This user manual is subject to change without prior notice.
(Specific please in kind prevail.)
PrefacePreface
Ⅱ

Contents
Preface
1. Safety
2. Product Introduction
3. Installation
4. Electrical Connection
About This Manual
Target Group
Scope
Conventions
1.1 Symbols Used
1.2 Safety Precaution
2.1 Overview
2.2 Product Appearance
2.3 Model Definition
3.1 Packing List
3.2 Selecting the Mounting Location
3.3 Mounting
4.1 Grounding
4.2 Grid/EPS Connection
4.3 Battery Connection
4.4 PV Connection
4.5 Meter/CT Connection
4.6 Communication Connection
Ⅲ
ContentContent
Ⅱ
Ⅱ
Ⅱ
Ⅱ
Ⅱ
01
01
02
03
03
04
06
07
07
08
10
11
16
17
18
19
20
22

5. System Operation
6. Commissioning
7. User Interface
8. Maintenance
Appendix
5.1 Inverter Working Mode
5.2 Startup/Shutdown Procedure
6.1 Inspection
6.2 Commissioning Procedure
7.1 LED
7.2 App Setting Guide
8.1 Routine Maintenance
8.2 Inverter Troubleshooting
8.3 Removing the Inverter
ContentContent
33
33
41
42
42
42
43
43
47
60
60
61
66
IV