Primo Water 601000 User manual

IMPORTANT: Do Not Return Dispenser to Store.
If you have questions or issues please contact 1-866-429-7566 for expert assistance.
_______________________________________________________________________________________
lease visit www.PrimoWater.com for more useful information, instructional videos, tips and special offers. age | 1
TO REDUCE THE RISK OF INJURY AND RO ERTY
DAMAGE, USER MUST READ THIS MANUAL
BEFORE ASSEMBLING, INSTALLING & O ERATING
DIS ENSER.
SAVE THIS MAN AL FOR
F T RE SE
Bottom Loading
Water Dispenser
Model # 601000

IMPORTANT: Do Not Return Dispenser to Store.
If you have questions or issues please contact 1-866-429-7566 for expert assistance.
_______________________________________________________________________________________
lease visit www.PrimoWater.com for more useful information, instructional videos, tips and special offers. age | 2
FEAT RES & F NCTIONS
To watch videos detailing the features and functions of this unit, please visit
www.primowater.com.
Dispenser Controls –Touch sensitive. Unlock, Hot and Cold.
Power and nlock Indicator – Green lock icon means there is power to
the unit. Green circle indicates hot control is unlocked and ready to use.
Operating Indicators – Circular lights mean dispenser is heating or
cooling water: Red for Hot and Blue for Cold.
Empty Bottle Indicator – Blinks to alert you water bottle is empty.
Spout - Hot & Cold water comes out here. Silver coating helps kill
bacteria from standing water.
Bottle Support – Helps align sports bottles and glasses with spout to
eliminate spills.
LED Nightlight – Located behind bottle support. Helps in low light.
Probe Assembly – Located inside cabinet. Connects to bottle to allow
water to be pumped into hot and cold tanks.
Drip Tray – Collects spills. Remove to empty when full.
Full Tray Indicator – Red float warns when tray needs to be emptied.
Probe Hanger – Located inside door at top. When changing bottles,
hang probe here to help keep it clean.
Water Bottle – Not included. Uses 3, 4 or 5 gallon bottles. Go to
www. rimoWater.com to find rimo Water at a store near you.
Energy Saver Switches – Located on back of dispenser. Switch red
control to off to stop heating. Switch green control to off to stop
cooling.
Drain – Located on back of dispenser. Switch red control to off to stop
heating. Switch green control to off to stop cooling.
Nightlight Switch – Located on back of dispenser. Allows you to choose
to have the nightlight ON or OFF.
Feet – Adjustable to level dispenser on uneven surfaces.

IMPORTANT: Do Not Return Dispenser to Store.
If you have questions or issues please contact 1-866-429-7566 for expert assistance.
_______________________________________________________________________________________
lease visit www.PrimoWater.com for more useful information, instructional videos, tips and special offers. age | 3
SAFETY PRECA TIONS
To reduce risk of injury and property damage, user must read this entire guide before
assembling, installing & operating dispenser.
Failure to execute the instructions in this manual can cause personal injury or property damage
and may void warranty.
This product dispenses water at very high temperatures. Failure to use properly can cause
personal injury.
When operating this dispenser, always exercise basic safety precautions, including the following:
• rior to use, this dispenser must be properly assembled and installed in accordance with this manual.
• This dispenser is intended for water dispensing only. Do NOT use other liquids. Do NOT use for other
purposes. Never use any other liquid in the dispenser other than known and microbiologically safe
bottled water.
• For indoor use only. Keep water dispenser in a dry place away from direct sunlight. Do NOT use outdoors.
• Install and use only on a hard, flat and level surface.
• Do NOT place dispenser into an enclosed space or cabinet.
• Do NOT operate dispenser in the presence of explosive fumes.
• osition back of dispenser no closer than 4 inches from wall and permit free airflow between wall and
dispenser. There must be at least 4 inches clearance on the sides of the dispenser to permit airflow.
• Use only properly grounded outlets.
• Do not connect your water dispenser to an extension or surge protector.
• Always grasp plug and pull straight out from outlet. Never unplug by pulling on power cord.
• Do NOT use dispenser if cord becomes frayed or otherwise damaged.
• To protect against electric shock, do NOT immerse cord, plug, or any other part of dispenser in water or
other liquids.
• Ensure dispenser is unplugged prior to cleaning.
• Never allow children to dispense hot water without proper and direct supervision. Unplug unit to
prevent unsupervised use by children.
• Service should be performed only by a certified technician. lease contact us at 866-429-7566 for
assistance.

IMPORTANT: Do Not Return Dispenser to Store.
If you have questions or issues please contact 1-866-429-7566 for expert assistance.
_______________________________________________________________________________________
lease visit www.PrimoWater.com for more useful information, instructional videos, tips and special offers. age | 4
GETTING STARTED
To watch videos of the processes noted in this section, please visit www.primowater.com.
Locate Dispenser
1. lace dispenser upright.
Notice: To avoid damage to compressor, allow dispenser to sit upright at least 45 minutes before proceeding.
2. Locate dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet.
Notice: Do NOT plug in power cord yet.
3. osition dispenser so the back is at least 4 inches from wall and there are at least 4 inches of clearance on both
sides.
4. Level dispenser by raising and lowering feet. Turn clockwise to raise height and counterclockwise to lower.
Install Drip Tray
1. To install Drip Tray, align pegs with holes and gently push down into place.
Install Water Bottle
1. Open dispenser door.
2. lace probe assembly on probe hanger.
3. lace fresh bottle outside of cabinet.
4. Remove entire plastic cap from top of bottle.
5. Clean outside of new bottle with a cloth.
6. lace probe into bottle.
7. Slide collar down until it clicks in place.
8. ush head down until tubes hit bottom of bottle.
9. Slide bottle into cabinet and close door.
Provide Electricity
1. lug cord into a properly grounded wall outlet.
2. At this time:
a. The lights on the dispenser will go through a test pattern. When complete the lock icon will be green,
indicating there is power.
b. The pump will begin to move water from the bottle to the hot and cold tanks. It will take up to 20 minutes to
fill the tanks for the first time. During this period the pump will run continuously. This is normal.

IMPORTANT: Do Not Return Dispenser to Store.
If you have questions or issues please contact 1-866-429-7566 for expert assistance.
_______________________________________________________________________________________
lease visit www.PrimoWater.com for more useful information, instructional videos, tips and special offers. age | 5
Activate Heating & Cooling
Notice: This unit will not dispense hot or cold water until the switches are activated.
1. To activate, push top side of power switches in to start heating and cooling water.
•If you do not want to heat water, push bottom side of red switch in.
•If you do not want to cool water, push bottom side of green switch in.
2. Once the power switches are activated:
•The wavy lines on the control panel will light up red, indicating the unit is heating water. Once water in the
hot tank is properly heated, the red light will turn off automatically.
•The snowflake icon on the control panel will light up blue, indicating the unit is chilling water. Once water in
the cold tank is properly chilled, the blue light will turn off automatically.
Activate Nightlight
ush top side of blue power switch in to turn light on. ush bottom side in to turn light off.
Register Online
While you wait for the water to get hot and cold, please register your dispenser. This will be helpful should you need
customer service assistance in the future.
Go to www.PrimoWater.com and click on Customer Care.
………………………………………………………………………………………………………………………………………………………………………………………
DISPENSING WATER
To watch videos of the processes noted in this section, please visit www.primowater.com.
This unit has been tested and sanitized prior to packing and shipping. During transit dust and odors can accumulate in
the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water.
Dispensing Cold Water (37°F to 50°F)
After setup, it will take up to 1 hour to get water to maximum cold temperature. During this time the compressor
could run continuously. This is normal.
1. Center bottle, glass, pitcher or cooking pot below spout.
2. Touch cold water control to start cold water flow.
3. Release control once desired fill level is achieved.
Dispensing Hot Water (185°F – 210°F)