Pro-Fit Innovations Magic Gripper User manual

The essential tool
for all projects
MagicGripper
www.pro-fitinnovations.co.uk
The Magic Gripper is unique that it uses the weight of the door or panel
to automatically clamp and automatically releases when the product
is lifted, thus acting as a second pair of hands.
The Magic Gripper has many uses - it’s the essential tool for all projects.
Pro-Fit Innovations Ltd, 63 Station Road, Oakworth,
Keighley, West Yorkshire BD22 0DZ
[email protected]
The essential tool
for all projects
TECHNICAL DATA*
• Dimensions: 360mm x 190mm x 170mm
• Opening Dimensions: 15 - 55mm approx
• Materials: Plastic RP and GF30 Steel Hinge
• Weight 1.5kg
• 6mm thumb turn locking screws and
12mm thumb turn dial adjustment nut
WARRANTY
In line with statutory regulations this product has
a 12 month warranty, starting from the date
of purchase.
A copy of the receipt is sufficient proof in the
event of claim subject to warranty. Damage due
to regular wear, transport, overloading, failure to
observe the instructions of assembly/ operation
or improper handling are not covered by the
warranty. The same applies to wear parts.
The manufacturer is not liable for indirect
consequences and damage to property. The
period of warranty is not renewed or extended
following possible repair. Claims under the
warranty are only recognised if the complete
product is sent, shipping paid, to the
manufacturer, the distributor or the service centre
listed below.
IMPORTANT NOTICES
Product Changes: Pro-fit Innovations reserves the
right to make changes in design, appearance
and construction of any and all products
listed herein without incurring any obligation in
making such changes in products previously sold
or transferred.
PRO-FIT INNOVATIONS also reserves the right to
discontinue the availability of any products at
such time as such action is considered necessary.
Liability: Pro-fit Innovations cannot accept the
responsibility for the results of using Magic
Grippers which have been abused or badly
worn. PRO-FIT INNOVATIONS also cannot accept
responsibility for results of using Magic Grippers
incorrectly or using Magic Grippers which have
been improperly maintained.
Safety Tips: Pro-fit Innovations encourages tool
safety and proper tools use. We suggest you refer
to the instructions for do’s and dont’s when and
where provided.
DO NOT
This product is not designed to fold. Do not force
Bend.
Please DO NOT drop product into the Grippers.
Place the product into the jaws and allow
grippers to clamp securely.
Patent number EP 1989476
Copyright © Pro-fit Innovations Ltd.
All rights reserved.
NEXT
GENERATION
MAGIC-GRIPPER
* All measurements and weights are approx and are subject to change at any time at Company discretion. 1PACK

This product is NOT designed to fold
- DO NOT FORCE BEND
IMPORTANT NOTICE - DO NOT BEND
1 x Sprung Hinge
2 x M6 Knurled screw
3 x Pan head Posi screw
6
6
1 x Gripper, left
Parts List
1 x Gripper, right
Assembly Instructions
A
1
2
1
2
B