Pro-Ject Audio Systems 2Xperience Primary User manual

INSTRUCTIONS FOR USE
Pro-Ject 2 X perience Primary

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
2

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
3
Pro-Ject 2 perience Primary
Controls, features and connections
1 Motor unit
2 Stepped drive pulley
3 Drive belt * 3a Hook *
4 Platter *
5 Tonearm counterweight * 5a Downforce scale
6 Tonearm lift lever
7/17 Tonearm rest and removable transport lock
8 Tonearm tube 8a Tonearm base
9 Power supply socket
10 Headshell with finger lift
11 Phono output sockets and earth connection
12 Anti-skating stub with anti-skating weight adjustment scale
13 Anti-skating weight *
14 Anti-skating weight support hoop
15 Adjustable tip-toe feet anti-scratch cups *
16 Power switch
Connection cable (not shown) *
Universal power supply (not shown) *
Single adapter (not shown) *

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
4
Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems record player.
In order to achieve maximum performance and reliability, please study these instructions carefully.


The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a
different model at a later date.
During assembling and adjustment small parts could be lost if they are not carefully placed in a
suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above which
are correspondingly numbered in the technical drawings above. Separately packed items are marked
with an asterisk *.
Safety instructions

      
        !

"!#! !#!
! !#! !
!
$
%!
Set-up
The deck is supplied partially disassembled and carefully packed for a safe transport. Remove all parts
from the transport packaging carefully.
Screw the three tip-toe feet (15) onto the threaded bolts located on the underside of the plinth Make
sure the surface you wish to use the turntable on is levelled (use a spirit level) before placing the
turntable on it.
After putting the motor unit in the place, carefully insert the platter axle into the bearing housing.
Level the plinth using the spirit level and the adjustable feet (15).
Fit the drive belt (3) around the platter (5) and the smaller diameter part of the motor pulley (2). Avoid
getting sweat or grease on the belt as these will deteriorate the performance and reduce the belt's
lifespan. Use absorbent kitchen paper to remove any oil or grease from the outer edge of the hub and the
belt.
Remove the transport lock (17) from the tonearm. Store it in the original packaging so they are
available for any future transportation.
&'
!
!

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
5
Cartridge downforce adjustment
The supplied counterweights (5) is suitable for cartridges weighing between 6 - 10g (counterweight no.
16). Alternative counterweights for cartridges weighing between 11 - 15g (counterweight no. 3), 8 -
11g (counterweight no. 2) or 5 - 8g (counterweight no. 9) are available as accessory part. Adjust the
downforce before installing the anti-skating weight.
Following adjustments have to be done very carefully. Remove cartridge protection cap. Push and turn
the counterweight (5) carefully on the rear end of the tonearm tube (8), so that the downforce scale
(5a) shows towards the front of the player. Lower the armlift and position the cartridge in the space
between arm rest and platter. Rotate the counterweight (5) until the arm tube is balanced. The arm
should return to the balanced position if it is moved up or down.
Once the arm is balanced correctly return it to the rest. Hold the counterweight (5) without moving it and
gently revolve the downforce scale ring (5a) until the zero is in line with the anti-skating stub (12). Check
whether the arm still balances out.
Rotate the counterweight counter clockwise (seen from the front) to adjust the downforce according
to the cartridge manufacturer's recommendations. One mark on the scale represents 1 mN (= 0,1g /
0,1 Pond) of downforce.
Adjusting the vertical tracking angle (vta)
Put a record and the record weight on the platter. When the needle is lowered into the record groove and
the tonearm is not resting on the lift arm, the tube of the tonearm should be parallel to the surface of the
record.
If it is not, loosen both hexagon screws in the tonearm base just enough to allow vertical movement of
the arm pillar without force and slide the arm up or down until it is parallel.
Retighten the hexagon screws without applying excessive force (which would deform the arm pillar) –
finger tight is quite sufficient.
Anti-skating force adjustment
The cartridge needle must be vertical in the record
groove in order to trace the groove wall modulations
correctly.
A small screw at the bearing end of the arm allows
incorrect azimuth to be corrected.
Slacken off the screw just enough to be able to revolve
the arm tube without applying force. Note! Do not
remove this screw completely!
With the aid of a good magnifying glass adjust the needle until it is vertical in the groove (i.e.
perpendicular to the record's surface). Ideally this should correspond to the top surface of the
cartridge body being parallel to the record surface.
When the needle is vertical, retighten the screw carefully.
(        )       
!*!*
)
!

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
6
Anti-skating force adjustment
The anti-skating force must be adjusted corresponding to the downforce as
follows:
Downforce Groove in the stub (15)
10 - 14mN 1
st
from bearing rings
15 - 19mN 2
nd
" " "
20mN and bigger
3
rd
" " "
Hang the loop of the thread of the anti-skating weight into the groove of the anti-skating stub (12)
corresponding to the downforce applied to your cartridge and hang the thread in the groove of the
wire support (14).
Connection to the amplifier
The record player has gold plated female RCA phono sockets (11) so you can substitute the interconnect
cables supplied with higher quality cables such as the Pro-Ject Connect IT interconnect cables for
connection to the amplifier if you wish. Use the Phono input (sometimes labelled gram, disc or RIAA)
on your amplifier. Make sure that the phono input offers correct matching and amplification for the
type of cartridge used. Line inputs (like CD, Tuner, Tape or Video) are not suitable.
Take care about connecting the left and right channel correctly. The right channel is usually marked
red, the left channel black or white. Check the manual of your amplifier for relevant information. An
earthing wire may be connected to the screw terminal between the sockets if you encounter humming
problems.
If your amplifier does not have an input suitable for phono cartridges, a separate phono amplifier
stage for MM or MC cartridges is required. It has to be connected between record player and a free
line level input of the amplifier.
For detailed product information regarding Pro-Ject Audio Systems interconnect cables and phono
amplifiers please visit our website: www.project-audio.com
ains power connection
A universal power supply with 3 exchangeable sockets adapters suitable for all countries is supplied.
Select the correct adapter for your country and insert the adapter to the exchangeable part of the
power supply.
Connect the low voltage plug from the power supply to the socket (9) on the rear side of the record
player before connecting the power supply to the mains.
Switching on and off
Pressing the power switch (16) alternately starts and stops the motor.
Changing replay speed
Use the accessory tool provided (3a), hook the belt (3) over the larger diameter part of the motor pulley
(2). To revert to 33 r.p.m. repeat the proceedings using the smaller step on the pulley.

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
7
aintenance and cleaning
Your record player requires little or no regular maintenance. Remove dust with a slightly moistened
antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust!
Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid
damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is
carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal
stretching.
"
*
ounting and connecting the cartridge
All cartridges with half inch mounting holes can be mounted. Leave the needle's protection cover on,
fit the cartridge to the headshell by using the supplied screws by passing one screw through each slot
in the headshell (10). Do not tighten the nuts yet.
Connect the tonearm wires with the cartridge pins as follows:
white left channel positive (L+)
red right channel positive (R+)
green right channel return (R -)
blue left channel return (L -)
The full sound quality of the record player can only be achieved if the cartridge is adjusted correctly.
Particular tools like the Pro-Ject Audio Systems alignment tool are required to accomplish this job properly.
If you are not well acquainted with the adjustment of cartridges, please call for the willing help of your
Pro-Ject Audio Systems dealer.
& ' )             !
"

Technical specifications PRO-JECT 2
X perience Primary/ Pro-Ject 9cc tonearm
Nominal speeds 33/45 r.p.m.
Speed variance 33: ±0,40% 45: ±0,35%
Wow and flutter 33: ±0,19% 45: ±0,17%
Signal to noise -69dB
Effective tonearm mass 15g
Effective tonearm length 9 " (230mm)
Overhang 18mm
Power consumption 5W max/ >0,3W standby mode
Outboard power supply 15V DC / 800m A, 90-264V AC, 47 – 63Hz
Dimensions (W x H x D) 465 x 130 x 340mm
Weight 6,5 kg
!

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
8
Potential incorrect use and fault conditions
Pro-Ject Audio Systems turntables are manufactured to the highest standards and undergo strict
quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to
material or production faults but can sometimes be caused by incorrect use or unfortunate
circumstances. Therefore the following list of common fault symptoms is included.
The platter does not turn although the unit is switched on:
•The unit is not connected to the mains power supply.
•No mains at the socket.
•Drive belt is not fitted or has slipped off.
No signal through one or other channel or both channels:
•No signal contact from the cartridge to the internal tonearm wiring or from that to the arm
lead or
from that to the phono box or between that and the amplifier. This could be due to a faulty
plug,
broken wire or solder joint or simply loose plug/socket connection.
•Phono input not selected at amplifier.
•Amplifier not switched on.
•Amplifier or speakers defective or muted.
•No connection to the loudspeakers.
Strong hum on phono input:
•No earth connection from cartridge or arm or arm cable to amplifier, or earth loop.
Distorted or inconsistent sound from one or both channels:
•Record player is connected to wrong input of amplifier, or MM/MC switch incorrectly set.
•Needle or cantilever damaged.
•Wrong r.p.m., drive belt overstretched or dirty, platter bearing without oil, dirty or damaged.
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above
information, please contact your dealer for further advice. Only if the problem cannot be solved there
the unit should be sent to the responsible distributor in your country.
Guarantee repairs will be accepted only if the unit is returned correctly packed in the original package.
Therefore we strongly recommend keeping the original packaging.
Never return a record player without making sure that it is safely disassembled and correctly packed in
the original packaging according to the diagrams on the last page of this user guide. Please remove the
following parts from the turntable and pack them separately: power supply socket (9), counterweight
(5), anti-skating weight (13) platter (4) and belt (3). Mount the cartridge protection cap. Insert the
transport lock for the tonearm (17).
Warranty
            
   +        

!!
Pro-Ject Audio Systems is a Registered Trademark
of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio
Systems Copyright
©
2018. All rights reserved.
The information was correct at the time of going
to press. The manufacturer reserves the right to
make changes to the technical specification
without prior notice as deemed necessary to
uphold the ongoing process of technical
development.

© Pro-Ject Audio Systems Pro-Ject 2 X perience Primary Revision 2018.03.08
9
