pro master 3655 User manual

Thank you for choosing the ProMaster Vertical Control Power Grip. To ensure proper operation, please read this manual thoroughly before using this
product.
This grip is specially designed for the Canon EOS 60D DSLR cameras. It is equipped with an alternate shutter-release button, AE-L/AF-L button and main
dial for shooting in a vertical position. This power grip can hold two LP-E6 rechargeable Li-ion batteries or can use six AA batteries (alkaline, Ni-MH or
lithium) to extend your shooting time.
Caution
1. This product should only be used with compatible devices specified in this instruction sheet.
2. Only use with the batteries and battery holders recommended.
3. Cover the power terminals with the contact cap when not in use. This prevents electrical shorts caused by metal objects touching the terminals.
4. When the battery holder is removed from the grip, remove the batteries or place the holder in a container to prevent electrical shorts caused by
contact with other metal objects.
5. The memory card access lamp may light up when this grip is mounted or removed from the camera. This is part of the normal operation.
6. The control lock is not a power switch; use the camera power switch to turn the power on/off.
7. The battery level may not display properly if batteries are inserted before attaching the grip to camera.
8. Remove batteries from the grip when not in use for an extended period.
9. Do not disassemble or repair this product yourself. Doing so will void your warranty.
10. Avoid water or extreme humidity and be sure to store in a cool, dry location..
11. Do not dispose of in fire or extremely high temperature environment.
12. Keep the product or parts away from children to avoid hazard from swallowing.
Part Names
Attaching to your camera
1. Turn off the power on your camera and the ON/OFF switch (10) of the grip. Open the battery chamber of your camera and remove the battery and
battery chamber door per the instructions provided with your camera. The battery door should be stored in the camera battery door storage slot (8) on
the grip to prevent loss.
2. Remove the protective cover (6) from the power grip and insert the power connection (7) of the grip into the cameras battery chamber.
3. Turn the attachment knob (3) and securely fasten the power grip to the tripod mount on your camera.
Code 3655
Replaces Canon BG-E9
Compatible with Canon EOS 60D

Installing the batteries
1. Turn off the power on your camera and the ON/OFF switch (10) of the grip. Turn the battery holder release handle (4) counter- clockwise to open the
battery chamber door.
2. Remove the battery holder from the grip. The LP-E6 battery holder (9) comes pre-installed when shipped.
3. For LP-E6 Li-ion Batteries: Matching the indentations on the battery with the LP-E6 holder, Press the battery down and slide it in the direction of the
arrow until the power terminals click into place.
4. For AA Batteries: Place six AA batteries of the same type into the AA battery holder, ensuring that they are in the correct orientation. Mixing battery
types, or using fresh and used batteries together could result in deteriorated performance or damage to the grip.
5. Insert the battery holder into the grip. Close the battery chamber and then turn the release handle (4) clockwise to lock. Turn on the camera and
check the battery level in the control panel or viewfinder.
One Year Unconditional Warranty
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your ProMaster dealer and it will be
exchanged for you at no charge. ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at
any time after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for evaluation.
Specifications
Power Sources 2 x LP-E6 or 6xAA batteries(LR6, HR, FR)
Compatible Cameras Canon EOS 60D
Replacement for Canon BG-E9
Operating Temperature 32~104°F/ 0~40℃
Dimensions Approx. 5.75x4.37x3.35”/146x111x85mm
Weight (without batteries) Approx.10.1 oz./285g (Excluding AA battery holder)
*All the trademarks are the property of their respective owners
*Specification and design are subject to change without notice
Code 3655
Made in China
WWW.PROMASTER.COM |FAIRFIELD CT 06825