
Magnifier Workbench Lamps MagnifierWorkbenchLamps
A. Before use, remove all packing from around the lamp.
Model No.:MA-1503A/I
Magnifier Workbench Lamps
Thank you very much for purchasing our Magnifier Lamp. The
Magnifier Lamp is ideal for precise work in home, office and
workshop as well as a lot of other important places which need
not only god light source but also magnification. Before using
the Magnifier Lamp, please read the following instructions
completely.
Features:
zComplies with CE safety standards
z3 diopter (1.75X magnification) glass lens.
zNew improved clamp-on sponge design for firm contact
on smooth surfaces
zand mounts to any bench or desktop.
zEven, shadow-free light under the magnifying lens with
9-watt fluorescent
ztube will make it easier for you to see and enjoy the
activities longer.
zSpring balanced adjustable arm for easy maneuverability
and positioning.
zEasy to replace the fluorescent tubes.
Data and specification:
Lens: 3D (1.75X magnification glass lens)
Lens size: :∅190*155mm
Light Source: PL 9W x 2pcs compact fluorescent lamp
Voltage: MA-1503A AC 110~120V/MA-1503I AC 220~240V
How to use:
B. Put the lamp on the horizontal table.
C. Insert the plug into a conveniently located electrical
socket.
D. Switch on using the ON/OFF switch located on the
surface of the base.
E. To place the head in the desired position.
Caution for safe using:
A. Indoor use only.
B. Never disassemble the magnifier lamp unless you are
qualified electrician.
C. Plug must be taken out while repairing the magnifier
lamp.
D. If the external flexible cable or cord of the magnifier
lamp is damaged, it should be replaced by a special
cable or cord exclusively available from the
manufacture or its agent.
E. Never leave the lens unattended in direct sunlight or
where light can shine through it. This constitutes a fire
hazard.
Troubleshooting:
1. Make sure A/C power cord is securely connected to a
power outlet
2. Turn on power switch
3. Check tube is ok.