
INSTALLATION
• 4-way, VGA + PC audio splitter with booster.
• Allows a single PC display output to up to four VGA monitors and speakers.
• Output 1 and 2 up to 60metres using video grade cabling.
• Outputs 3 and 4 up to 100 meters using video grade cabling and the Gain and EQ
booster.
• Simple plug & play, no software to install.
OVERVIEW
• Connect the source PC/Laptop/Notebook VGA output to the VGA input on the
splitter/booster using a suitable VGA cable.
• Connect the source equipment audio output to the 3.5mm stereo audio input on the
splitter/booster using a suitable cable.
• Two VGA monitors and pairs of speakers can be connected to the VGA and audio
outputs 1 and 2 using high quality VGA and audio cables up to 60 meters long.
• Two further VGA monitors and pairs of speakers can be connected to the outputs 2
and 3 using high quality VGA and audio cables up to 100 meters long.
• Connect the PSU 12VDC jack to the power input socket, plug the PSU into the
mains supply and turn on the power and the red LED will illuminate.
• Outputs 2 and 3 signals can be boosted using the Gain and EQ rotary controls as
required to compensate for losses over the distance.
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent re or shock hazard, do not expose this product to rain or moisture.
• Only use the PSU supplied or one of identical specication.
• Check that the voltage indicated on the PSU rating plate corresponds with that of
the local network before connecting to the mains power supply.
• All connections should be made with source and destination equipment switched off
and/or volume levels at minimum.