PRO SIGNAL PSG3052 User manual

PSG3052
HDMI 2.0 1x4 SPLITTER

WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
• The HDMI Splitter distributes an HDMI signal without loss to one or more high
denition display device such as HDTV. It can optimize your home theatre system to
the best effect.
• The HDMI signal is distributed from source device such as DVD, Satellite Receiver,
Set-Top Box, DV Camera, A/V Receiver and other HDMI enabled device to high
denition display device such as HDTV and HDMI Flat panel Display.
• Main unit.
• PSU
• User Manual.
Please read these instructions carefully before use and retain for future reference.
• Connect the HDMI cable between signal source and input port of Splitter.
• Connect the HDMI cable between output port of the Splitter and HDTV.
• Connect PSU to the Splitter and connect to the mains supply.
Power on the signal source and the display HDTVs.
Note: Depending on the type of the input or output device, the maximum length of the
connecting cables will differ. Use high quality cables for lengths of up to 10m for input and
output.
• When using electrical appliances basic safety precautions should always be followed.
• Check that the voltage indicated on the rating plate corresponds with that of the local
network before connecting the power supply to the mains power supply.

SPECIFICATIONS
• Fully HDMI 2.0 specication compliant compatible with source device and high
denition display device, such as DVD and HDTV which have HDMI Ports or digital
ports and are compliant with HDCP1.1/1.2/1.4/2.2 protocol.
• Support resolutions: 480i/p,576i/p,720i/p,1080i/p,4Kx2K@60Hz.
• Support 30/36 dark, extended colour space support, including: SYCC601,Adobe
RGB,AdobeYCC601.
• Blu-ray DVD 24/50/60fs/HD-DVD/xvYCC.
• Audio formats DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3 and DSD.
• Compatible with DVI by using HDMI to DVI adapter.
• Plug-and-play.
• Metal casing design and overall shielding without signal interference.
• Led indicates signal and power mode.
• Supports 3D.
FEATURES
Signal Inputs/Output
Input DDC Signal 5 volts p-p (TTL)
Maximum Single Link Range 4096x2160
Output Video HDMI
Operating Frequency
Vertical Frequency Range 50/60Hz
Video Amplier Bandwidth Up to 18Gbps/340MHz
Resolutions (HDTV)
Interlaced (50&60Hz) 480i, 576i, 720i, 1080i
Progressive (50&60Hz) 480p, 576p, 720p, 1080p
Power and Environment
Dimensions 150x64x25mm
Weight 39g
External Power Requirements 5V DC @ 2A
Operating Temperature 0oC to +70oC
Operating Humidity 10% to 85% RH (no condensation)

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0
MAINTENANCE
• Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
• Do not allow moisture to enter the casing.