PRO SIGNAL PSG3039 User manual

PSG3039
HDMI 1x2 SPLITTER

WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
• The high performance mini HDMI Splitter which distributes one HDMI input into two
identical HDMI output streams.
• It supports full 3D format and 4Kx2K. Its video amplier bandwidth can be up to 3.4
Gbps/340MHz.
• Main unit.
• 5V DC PSU.
• User Manual.
Please read these instructions carefully before use and retain for future reference.
• Please make sure all devices you wish to connect have been powered off.
• Connect the source device to the splitter using an appropriate HDMI cable (Max 10m).
• Connect the outputs to each display using suitable HDMI cables (Max 10m).
• Connect the PSU to the 5V input socket on the splitter then plug it into the mains and
switch the power on.
• When using electrical appliances basic safety precautions should always be followed.

SPECIFICATIONS
• This HDMI Splitter has many operational features:
• Installs in a few minutes, no setup required.
• One HDMI Input, two HDMI outputs.
• Supports Full 3D and 4Kx2K resolution.
• Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
• Supports 12bit per channel (36bit all channel) deep colourTM.
• Supports uncompressed audio such as LPCM.
• Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD
and Dolby True HD).
Signal Inputs/Output
Input DDC Signal 5 volts p-p (TTL)
Maximum Single Link Range 4Kx2K
Output Video HDMI (with full 3D and 4Kx2K)
Operating Frequency
Vertical Frequency Range 50/60Hz
Video Amplier Bandwidth 3.4Gbps/340MHz
Resolution (HDTV)
Interlaced (50&60Hz) 480i, 576i, 1080i
Progressive (50&60Hz) 480p, 576p, 720p, 1080p, 4Kx2K
Power and Environment
Dimensions 63x54x18mm
Weight 50g
External Power Requirements 5V DC @ 1A
Operating Temperature 0oC to +45oC
Operating Humidity 10% to 85% RH (no condensation)
FEATURES
MAINTENANCE
• Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0