PRO SIGNAL PSG3428 User manual

1
1080P HDMI EXTENDER SPLITTER 120M
PSG3428

2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent re or shock hazard, do not expose this product to rain or moisture.
• Check that the power supply matches the mains voltage.
• Only use the power supply provided or one of identical specication.
• Ensure the IR remote extender cables are connected to the correct devices.
• Beware of static electricity which may damage the device. Use ESD precautions
when installing.
• Do not plug or unplug cables while the devices are powered on.
WHAT'S INCLUDED
• HDMI Extender and Receiver x 8
• Power Adapter 230VAC to 5VDC 2A
• Operation Manual
• IR remote extender
• IR remote receiver x 8
• Based on HDbitT technology for a more stable performance.
• Distribute 1 HDMI source to 4 HDbitT outputs.
• Supports full HD resolution 1080p@60Hz.
• Support cascade connection by switch or router.
• Compatible with existing network, will not affect other network trafc.
• Plug and play setup.
• Convenient wall-mountable design.
This HDMI Extender allows a source HDMI signal to be split to 4 receivers and displays
over a range of up to 120meters at 1080p resolution using a CAT6/6A/7 network cable.
Requirements:
1. HDMI source device (PC, DVD, PS3) HD monitoring equipment etc.
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
NOTE: It is recommended to use a high quality network cable to avoid signal loss and
crosstalk.
OVERVIEW
FEATURES
Transmitter
123 4 5 6 7

3
Receiver
1. Reset Button Press to restart the device
2. HDMI output Connect with HDMI display device
3. IR in Connect with IR receiver extension cable, please make sure
the remote control used is within the effective range
1. Reset button Press to restart the device
2. HDMI input Connect with the source device
3. IR out Connect with IR extension cable
4. Transmission LED Illuminates during data transmission
5. Connection LED Illuminates when a good network connection is attained
6. RJ45 signal output Connect with network cables
7. 12VDC input Connect with 12VDC/3A power adapter
1 2 3
CAT CABLE REQUIREMENT
Follow the standard of IEEE-568B, It is recommended to select a high quality network
cable with less loss and crosstalk.
INSTALLATION
• Connect the HDMI input on the extender with the source device.
• Connect the extender TX RJ45 output ports to the receivers either directly using
CAT6 or better cable, or using high quality patch cables, connect via an existing
network.
• Connect HDMI output of HDMI extender RX to HDMI input of HDTV and set the TV
source input to correct HDMI input channel.
• Connect the power supply output to the extender 5V DC input and connect the PSU
to the mains and turn on the power. The power LED on the front of the extender
should illuminate.
• The receivers do not require external power.

4
IR User Guide:
• IR receiver extension cable should be connected to the IR IN port of the receiver.
• The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
• The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
• Face the receiving head of the IR receiver extension cable toward the user for
unobstructed line of sight to the remote control.
• The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.

5
SPECIFICATIONS
Voltage/Current DC 12V3A
Power consumption <10W
HDMI compliance HDMI 1.3
HDCP compliance HDCP 1.2
HDMI resolution 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
Transport protocol HDbitT
Input and output signal 0.7~1.2Vp-p (TMDS)
Input and output DDC
signal
5Vp-p (TTL)
IR signal Support 20~60kHz IR device
Input cable length <8m
Output cable length <8m
Network CAT6/6A/7 <120m
Working temperature 0~60°C
Storage temperature -30~ 70°C
Humidity 0~90%RH (no condensation)
Dimension TX: 299(W) x 110.7(D) x 29.6(H)mm
RX: 97.5(W) x 97.5(D) x 25(H)mm
Material Alloy
Weight 430g total
CLEANING & MAINTENANCE
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area.
Made in China. PR2 9PP
Man Rev 1.0